Milling machine

EMCO VMC 300

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions Position 1 is defective in good condition Fully functional Bsdpowlpb Usfx Amyjlk

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 Bedpfxoyhcfke Amyelk • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s Blodpfeya Hg Nex Amysk • Coolant Tank Capacity: 100 L • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar Bodpfxszl D Awo Amyolk - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded. Blodjyt E Nvjpfx Amyok

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Bsdpfx Amovt Amueyolk Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: used, For sale is a used vertical machining center EMCO VMC 300. Bodpsy D Ut Hjfx Amyslk Equipment / Data: Manufacturer: EMCO Model: VMC 300 Year of manufacture: approx. 1990 Control: Siemens Sinumerik / 810M Travel paths: approx. X 420 / Y 330 / Z 400–450 mm Tool holder: SK40 Tool changer: 12 positions Table size (as with comparable models): approx. 850 x 325 mm Spindle speed (comparable units): up to 5,000 rpm Machine weight (comparable units): approx. 2,900 kg Contents of rack with various machine accessories are available and can be included by arrangement. Comparable VMC 300 machines are specified with a 12-station tool changer, SK40, table 850 x 325 mm, 5,000 rpm and approx. 2,900 kg weight. Condition: Used, typical for its age. Visual condition: see photos. Functional status: [Machine was operational until removal / tested under power] Therefore, sale is preferably to knowledgeable buyers. Scope of delivery: - EMCO VMC 300 - Siemens control - 12-position tool changer - Various accessories / contents of rack by arrangement Note: Inspection by appointment possible. Loading / collection by arrangement. Sale preferably to commercial buyers.

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Bedpfxewmwrdj Amyjlk Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: used, Year of construction: 2012, FANUC Robodrill Bodjzktvkopfx Amyslk Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed: 24,000 rpm Lehmann EA510 5-axis rotary table Blum part probe Height probe on the table

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Bljdpjw Tc Nyjfx Amyek