Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018

EM 1 x 20 M170 - 63/100 8000

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage Redpfxsw Ahg Rs Apdoch The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, Year of construction: 2016, Overview Rcsdpjvy D Adsfx Apdoh This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork - Complete documentation available

Year of construction: 2012, condition: used, 3 cylindroconical fermentation and storage tanks with frame and cone cooling Additional title: 3 pieces, with frame and cone cooling Total volume: 3000 l Pressure capacity: 3 bar Length: 1860 mm Width: 1860 mm Height: 3700 mm Material: stainless steel Base construction: standing on feet Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves; Rjdpfxjxwy Tpj Apdjch

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) - Capacity: 2,000 – 6,000 bph - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Rcodpsyb S S Hjfx Apdeh - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Power: 4,5 kW Rjdpfx Ajxbpchspdsch Voltage: 380 V Frequency: 50 Hz Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Weight: 1800 kg Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Condition: used, Year of construction: 1994, Combined bottle filler with labeller ‘Krones Bloc’ Additional title: Monobloc arrangement Capacity: 7000 bo/h Power: 38,1 KVA Current: 55 A Voltage: 230/400 V Frequency: 50 Hz Formats: 0.5 litre NRW (belly/neck/back), 0.33 litre Steinie (belly/back), 0.33 litre Longneck (belly/neck/back) Running direction: left -> right Operation / Control: Siemens S 5 Rcedpfjxb Ahwjx Apdeh Position: free standing Features: Labeller Universella Periphery: miho inspection device

Year of construction: 2020, condition: new, functionality: fully functional, Manufacturer Rcjdpfxeyl H Hto Apdjh BRINOX Machine designation CIP System CS6720 Model LEP12 – CIP module with insulated buffer tank, 200 L Year of manufacture 2020 Condition New, unused, originally packaged, never installed, never commissioned System type Modular CIP system (Cleaning in Place) on stainless steel frame, fully pre-assembled. Comprising insulated CIP buffer tank, centrifugal pump, heat exchanger, stainless steel piping module, valve technology, measuring and control equipment, as well as media connections. Frame dimensions Approx. 2330 x 1224 x 2127 mm Buffer tank Working volume: 200 liters Total volume: 278 liters Cylindrical design with dished ends according to DIN 28011 Operating pressure: -1 to +3 bar Test pressure: 5.4 bar Permissible temperature: -10 °C to +150 °C Operating temperature: 0 °C to +85 °C Fluid group: 1 Insulation: Glass wool with low chloride content (

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator Rsdpfx Apezxnu Dodsch - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 1996, Bottle Filler and crown capper, make Krones, type: Mecafill VKV 24/KK 6-94 LM, 24 filling valves, Vacuum pump, hot water injection before closing, 6 head bottle cap closing, bottle burst control, Crown Cork feeder + bin electr. height adjustment, direction: counter clockwise / right to left. Redpfjunh I Aox Apdjch

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² Rcedozzmfaepfx Apdeh If you have any questions or would like more information, please feel free to send us a message or call us.