Bottle filler/capper/labeller

Krones

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys Fjdszzz N Hspfx Ak Uopl The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT. Fpedpfow Rpd Sox Ak Uol

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A Fedpszzz Naofx Ak Uopl - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1998, machine/vehicle number: SV03, Used Automatic Decapper Krones 10 heads year 1998Technical Specifications & Performance DataThe Used Automatic Decapper Krones 10 heads, model 360-10-113, stands as an exceptional choice for your industrial packaging needs. Built in 1998, this robust decapping machine is designed to efficiently handle high-speed bottling lines. With a production speed of 20,000 bottles per hour, it meets the demands of large-scale beverage production. Specifically designed for glass containers, it offers precision and reliability for processing various bottled products including water, juice, beer, and wine.Number of Heads: 10Electrical Requirements: 400V, 50Hz, 8.25ACondition: In StorageManuals: AvailableAdvanced Automation & Control SystemsAt the heart of this used bottling line machine is an advanced control system that ensures precise operation. The automation level is designed to streamline production processes, allowing for seamless transitions between different beverage types. The machine’s control panel features user-friendly interfaces, making it simple to operate while maintaining high safety and efficiency standards. Safety features integrated within the machine ensure that it complies with modern production safety protocols. This decapper operates on 400V with an electrical current of 8.25A, ensuring powerful and efficient operation.Production Line Integration CapabilitiesThe Krones decapping machine seamlessly integrates with other industrial packaging systems, making it a versatile component of any production line. Its capability to handle format changes efficiently makes it compatible with other equipment such as filling, labeling, and capping machines. The machine is engineered to support multi-product flexibility, accommodating a variety of beverage types and container shapes with ease.Machine Condition & Maintenance HistoryCurrently in storage, the Krones decapper is primed for redeployment. Although used, it remains in excellent condition, backed by a comprehensive maintenance history that attests to its reliable performance. Routine maintenance has kept the machine in optimal working order, ensuring longevity and operational efficiency upon return to active duty.Operational Performance & VersatilityThe machine excels in operational performance, offering versatility that meets multiple production needs. It is compatible with a variety of product types, making it ideal for companies that handle diverse beverage manufacturing processes. Its ability to adapt to different container materials, particularly glass, allows for flexibility and ease in switching between product lines, ensuring uninterrupted production.Installation Requirements & Site PreparationProper installation and site preparation are crucial for maximizing the performance of the Krones decapping machine. The unit requires a designated space that accommodates its operation and allows for safe and accessible maintenance. Additionally, utility connections must meet the specified electrical requirements of 400V and 50Hz to ensure optimal functionality.Safety Standards & Compliance CertificationSafety is paramount in industrial packaging operations... Fjdpfsvgu D Eex Ak Uopl

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY Fodpfev Tl D Nex Ak Uopl CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: used, Year of construction: 2004, machine/vehicle number: M323, Used combi KRONES contiform S8 + mecafill triblockTechnical Specifications & Performance DataThis rotary blow-fill-cap monoblock is engineered for high-quality PET bottle handling and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding section with a Mecafill filling block and a Krones capping unit, delivering efficient performance for still and sparkling water. Designed for industrial packaging environments and suitable for integration into a used bottling line or as a second hand standalone system, it combines precision, reliability, and reduced footprint.Manufacturer: KronesModel configuration: Contiform S8 + Mecafill (integrated tri-bloc)Year of manufacture: 2004Maximum speed: up to 12,800 bottles per hourContainer material: PETCurrent bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum bottle height: 350 mmRotation/direction of work: ClockwiseNeck type: AlaskaBlow molder molds: 8 cavitiesGrippers (in/out): 8Mandrels: 220Blowing pressure: 40 barElectrical supply: 400 V, 3 PH, 50 HzControl systems: Siemens PLC with Krones HMIAdvanced Automation & Control SystemsThe monoblock features an integrated automation suite designed to simplify operation and reduce changeover times. The Siemens PLC platform coordinates the stretch blow molding, filling, and capping phases, while the Krones HMI provides intuitive process visualization, recipe selection for multiple bottle formats, and operator diagnostics. Rotary motion ensures smooth container transfer between stations, minimizing scuffs and misalignment. Electronic setpoints for speed and temperature profiles improve consistency across shifts and batches. Safety interlocks and guarded access points support reliable operation during beverage production.Production Line Integration CapabilitiesEngineered for seamless integration, this monoblock can operate inline with upstream preform feeding and downstream conveyors, labelers, inspectors, and secondary packaging machinery. It fits modern beverage production and industrial packaging layouts, supporting flexible format changes across 0.5L, 1.0L, and 1.5L PET bottles. The integrated design reduces footprint and transfer points compared to separate machines, enhancing efficiency in both new installations and upgrades of a used bottling line.Machine Condition & Maintenance HistoryThe machine is refurbished and guaranteed, ready for operation with compatible spare parts available. It is supplied in excellent working condition, tested, and prepared for immediate deployment. A 6-month warranty underscores its reliability and provides added assurance for second hand equipment buyers.Operational Performance & VersatilityThis tri-bloc configuration is optimized for water bottling, including both still and sparkling products. The blow molding section with 8 molds delivers stable out... Fedpfx Aksyz R H Dj Uspl

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 12.000 BPH (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant ... Fpodpfey Uduuox Ak Uel

Condition: good (used), Item: A-12.000-MKT Fodpsh E Dpiofx Ak Uopl MKT Cheese PrePress Line in good condition, capacity 12.000 L Please contact us for more information.

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspecti... Fjdpfx Aksy Ud Alj Ujpl

Condition: used, Year of construction: 2002, machine/vehicle number: M316, Used KRONES filling triblock for sparkling water 25000 BPH - year 2002Technical Specifications & Performance DataThis electronic filling monoblock integrates rinsing, isobaric filling, and capping in a compact rotary platform engineered by Krones. Optimized for PET bottles and carbonated water applications, it delivers high output with excellent process stability and hygiene. The configuration includes an 80-valve filler, 60-gripper rinser and a 15-head Zalkin capper, using neck-handling transfer for precise container control.Production speed: up to 25,000 bphCurrent bottle format: 0.5LContainer material: PETNeck handling: Yes (neck transfer)Neck finish type: AlaskaFiller valves: 80Capper heads: 15 (Zalkin)CO2 management: Yes (isobaric filling for carbonated products)Machine type: RotaryRotation direction: CounterclockwiseMachine pitch: 111 mmMax container height: 320 mmWorking height: 1200 mmManufacturer: KronesAdvanced Automation & Control SystemsThe monoblock features Krones HMI interfaces for streamlined operation and diagnostics. Dedicated panels identified as KFS-3 and KRS-1 provide clear process monitoring, real-time production counters, and guided functions such as production counter reset, error list management, and lamp tests. Operator interaction is simplified via an intuitive keypad with contextual help and status indicators across machine modules.Integrated Krones control panels with HMIReal-time production counters and status visualizationProgrammable function keys for fast operationEmergency-stop circuitry and safeguarded control stationsProduction Line Integration CapabilitiesDesigned for industrial packaging environments, this used bottling line component can operate as part of a complete beverage production layout or as a stand-alone monoblock. Neck-handling transfer ensures stable throughput across light-weight PET formats, while rotary architecture supports quick changeovers between compatible sizes.Inline integration with upstream/downstream conveyorsSuitable for PET bottle handling with neck transferFormat flexibility around 0.5L, with potential for adjacent sizes depending on toolingIdeal for water and carbonated water within beverage productionMachine Condition & Maintenance HistoryThe monoblock was disconnected from regular production approximately three months ago with no issues reported. It is in excellent working order and available for immediate shipment.Operational status: ready for operationTime since last production: ~3 monthsCondition: excellent; fully functional at time of disconnectionOperational Performance & VersatilityEngineered for carbonated water, the isobaric filler with CO2 management ensures accurate fill levels a... Fpsdpfxoyr Hvuj Ak Uol

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Fpsdpfx Aksyln D Ts Uol

Condition: used, Year of construction: 2012, operating hours: 759 h, machine/vehicle number: LC644, Used Kronse CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Variopac wrap-around packer; Krones Modulpal palletizer; integrated conveyor systemDocumentation: Operating manuals availableLayout: Line layout availableAdvanced Automation & Control SystemsKrones automation with centralized HMI enables recipe-based changeovers and synchronized drives for high-speed CSD operation.Operator HMI for setup and monitoringAutomatic synchronization across rinsing, filling, labeling, packing, palletizingElectronic fill control optimized for isobaric CSD fillingInterlocked safety guards and distributed emergency stopThree-phase 400 V supply with 230 V control circuits, 50 HzProduction Line Integration CapabilitiesEngineered as a cohesive Krones platform and bottling station, maintaining precise glass handling from infeed through palletizing.Inline operation with full conveyor integration from empty bottle inspection to finished palletsFormat range centered on 1.0 L, 28 mm neck glassIsobaric technology dedicated to carbonated soft drinksLabeling via Krones Autocol for accurate application on glassWrap-around case packing (Variopac) and palletizing (Modulpal)Machine Condition & Maintenance HistoryOn power and ready for operation with low hours. Documentation and layout support fast installation and service planning.Operational status: ready for operationLow-hours profile: 759 hoursManuals and layout includedOperational Performance & VersatilityConfigured for glass CSD, providing stable carbonation retention and foam control at 36,000 bph. As a CSD bottling machine, quality control is ensured by dual inspection: Linat... Fsdpfx Aozd Uftek Ujpl

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Fpsdpfx Akex H Tgds Uol Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Fpsdpfx Ajk Hz Iwjk Usl YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotary... Fedpoy Szb Tofx Ak Uspl