FLAT GRINDING MACHINE

ELB-Schliff

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging Lrsdpexp Skdofx Ad Nog + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg Lodjvrcqdopfx Ad Norg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, Year of construction: 1998, Empty weight: 21.000 kg Price: On request Ljdpfxjx E Ukuj Ad Njrg - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 430290898 - Drive system: CNC - Power [kW]: 60.0 - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 900 - Z-axis travel [mm]: 550 - Table width [mm]: 2000 - Table depth [mm]: 900 - Magnet width [mm]: 1500 - Magnet depth [mm]: 800 - Max. spindle speed [rpm]: 3000 - Options: Filter system - Control type: Unicon - Motor power: 60.0kW - Transport weight [kg]: 21000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total height: 2,500 mm, total length: 5,900 mm, total width: 3,000 mm, Empty weight: 6.700 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 199851086/1098 - Drive system: Conventional - Power [kW]: 11.0 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 680 - Z-axis travel [mm]: 400 - Table width [mm]: 1600 - Table depth [mm]: 670 - Magnet width [mm]: 1200 - Magnet depth [mm]: 600 - Control: Conventional - Motor power: 11.0kW - Transport dimensions: 5900mm x 3000mm x 2500mm (l x w x h) - Transport weight [kg]: 6700kg Financial information Lrjdpfx Aox E Uknod Njg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 1, grinding length: 1,000 mm, grinding width: 600 mm, Geibel & Hotz FS 1050 SD horizontal surface grinder Grinding area 1000 x 600 mm Fine pole pitch of the magnetic plate Many flanges and discs Large paper belt filter Adjustable feet Blade and circuit diagram Balancing scale Machine was in use a maximum of 2 days a week - Not a standard machine Pricing: ex-works - unpacked - uninsured Delivery time: immediately - subject to prior sale Lrjdpfx Adev U Dfuo Njg Errors excepted - technical data is non-binding

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Ljdoxxb Nbopfx Ad Njrg total power requirement / kW weight of the machine ca. / t required space / m

Condition: ready for operation (used), A surface grinding machine ELB-Schliff with position display is available. Magnetic chuck dimensions X/Y: 900mm/450mm, grinding length: 900mm, grinding width: 450mm. Documentation available. An on-site inspection is possible. Lrsdpfsya Hw Ijx Ad Njg

Condition: excellent (used), Year of construction: 2006, Control: ELB-SPS Grinding range: Length X 1000 mm Width Z 750 mm Height Y 400 mm Magnetic table 1000x700 mm Table load: Lsdpfx Adovwl Ips Norg (without magnetic plate) 1100 kg Longitudinal axis X: Table speed 2-26 m/min. Longitudinal stroke max. 1100 mm Vertical axis Y Vertical stroke 400 mm Feed speed max. 1200 mm/min. Vertical feed min. 0.001 mm Cross axis Z: Cross stroke max. 620 mm Feed speed max. 2000 mm/min. Cross feed min. 0.001 mm Grinding spindle: Cone 75 mm Drive 22 kW Speed range 1450 rpm Grinding wheel dimensions 450x150x203.2 mm Machine footprint (without control panel) LxWxH 3550x2750x3230 mm Total weight of machine 7300 kg

Condition: excellent (used), Year of construction: 2008, ELB Smart BD 10 Comfort Surface Grinding Machine (2008) Manufacturer: ELB Model: Smart BD 10 Comfort surface grinding machine Condition: used, very good, spindle replaced in 2020 Year of manufacture: 2008 Grinding length: 1000 mm Grinding width: 600 mm Grinding height: 600 mm Scope of delivery: - Documentation - Machine mounts Lrsdpfxex Tu Ebo Ad Neg - Spare discs - Belt filter system - Oil mist extraction system - Accessories, filters, etc.

Condition: repair required (used), Year of construction: 1990, functionality: limited functionality, 1. Used ELB precision surface grinding machine OPTIMAL 6375 ND, year 1990 Technical specifications: Grinding length: 600 mm Grinding width: 375 mm Grinding height: 375 mm Max. table load: 600 kg X-axis table feed: 1 – 30,000 mm/min Max. Z-axis cross feed: 1,200 mm Cross travel: 360 mm Table longitudinal feed: 100 – 800 mm Grinding spindle drive: 1,440 / 2,900 rpm Grinding wheel dimensions: 300 x 50 x 76.2 mm Lrsdpfxsya D Hms Ad Njg Magnetic chuck: 600 x 350 mm Accessories: Wet grinding unit Manual dressing device Known defects: Automatic Z-axis infeed is no longer stepless; Z-axis can be fed manually.

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, hobbing software. Lrjdpfx Adew Tzfge Nog

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet Lodpjwrmcpjfx Ad Norg - coolant device - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Lrsdpfx Asx Dd Idsd Neg Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, Equipment: 4 in one shovel, The machine is in very good technical condition, inspection under power possible by prior arrangement. Chip conveyor, high-pressure cooling, CNC control system Sinumerik 840D SL. Lredpexcu Ewefx Ad Neg

Condition: good (used), Grinding range 400x250x375mm Wheel diameter 300mm Ledpfx Adsfbx Dwe Nsrg Magnetic plate 400x250mm MARCELS MASCHINEN CH