Single Column Press - Hydraulic

Durendus Einständerpresse

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 125 t, Single-column press – Manufacturer: Durendus – 125 t servo press – Table 2200 × 750 mm For sale is a hydraulic C-frame servo press from Durendus with an adjustable pressing force of up to 125 t and integrated 50 t ejector. Thanks to modern servo-hydraulics, this machine offers up to 40% reduced energy consumption compared to conventional systems and is ideal for demanding assembly, forming, and production processes. ===== Technical data & information: Hydraulic servo press – C-frame – 125 t ==== General Specifications - Manufacturer: Durendus - Model: Single-column press / servo press - Design: C-frame press - Pressing force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm ==== Table & Ram - Table area: 2,200 × 750 mm - Ram area: 980 × 750 mm - Guidance: 4 guide columns Ø 100 mm - Tool centering: 50 mm receptacle - Preparation: Vibration damping plates (30 mm) - Preparation: Robot interface ==== Ejector - Ejector force: 50 t - Ejector stroke: 200 mm ==== Hydraulic Cylinder - Stroke: 0 – 700 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 300 mm/s - Idle speed: 300 mm/s - Pressing speed: - up to 25% load: 25 mm/s - up to 50% load: 14 mm/s - up to 80% load: 7 mm/s - up to 100% load: 6 mm/s ==== Hydraulic Unit - Servo hydraulic pump: Duplomatic, 143 l/min - Servo motor power: 15 kW - Pressure accuracy: ± 5 bar - Pre-fill valve: NG-160 ===== Assembly, forming technology, series production, automated manufacturing, toolmaking, energy-optimized pressing processes Servo press, single-column press, C-frame press, hydraulic press, industrial press, production press, energy-efficient press, die spotting press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a custom quote. Our hydraulic presses are manufactured in accordance with both German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon those regulations. Our core expertise lies in special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. We primarily use components from leading European manufacturers for the press hydraulics. Dsdpfx Aox Aqtqsiwout

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Djdjkvnumjpfx Aiwjut Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm Dedpou At Thefx Aiwout - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg Dusdeg U Utvepfx Aiwet strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Dsdpfx Ajcblc Sjiwsut Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm Dodpfx Asu Nfvuoiwout passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Dsdpfehlnzkex Aiwsut Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment possible. Item 1 System 3R-203 Rotary Element WEDM 360° Item 2 System 3R-201J Adapter WEDM 90° Item 3 System 3R-201J Adapter WEDM 90° Item 4 System 3R-201J Adapter WEDM 90° Item 5 System 3R-202 MiniBlock Item 6 System 3R-202 MiniBlock Item 7+8 System 3R-204 Height Adjustment Adapter WEDM Item 9 System 3R-218/30S Holder Sets Item 11 System 3R-602.21 Manual Chuck Macro Item 12 System 3R-294.3 Vise Dedpfx Aijxqn Ubjwout Item 15 System 3R-293.3 SuperVice Item 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm System 3R-200-4J-2 330mm System 3R-200-4J-2 138mm Item 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection possible!

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz Duedpfjcdrmmox Aiwet - total power requirement 3,92 kW without control

Condition: used, Year of construction: 2017, Technical details: grinding diameter: 280/320 mm grinding length: 750 mm centre height: 170 mm Djdpfx Ajttxg Soiweut weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m