Lathe / Turning machine

Drechselmaschinen Vorführmaschinen

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer Giodpfx Ahsb A Hxuovop -Nominal power input: 620 W -Mains connection: 230 V -Drill -div. drills -Suitcase -Weight: 5.5 kg

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Gedpfx Ahsvbquieveip Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest Godpjtuuv Nsfx Ahvsip - Punch with brass tip - Key for spindle lock

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister STRATOS ECO woodturning lathe with a center distance of 680 mm. The demonstration machine is in original condition, therefore you receive the full warranty. Giedpfstpxt Rsx Ahvep Technical Data - Center height approx. 230 mm - Machining diameter approx. 455 mm (with optional outboard turning attachment up to 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle mount M33 x 3.5 with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection: 230 V) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipment rates: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: woodturning lathe, lathe, turning bench, woodturning bench, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Gisdpsv Hgctofx Ahvjp Two supports with profiling knives 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm Gijdpfx Asviqybjhvsp throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Gsdpfxsuzpiis Ahvjip

Condition: new, mileage: 22 km, fuel type: gasoline, axle configuration: 4x2, wheelbase: 3,250 mm, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,700 mm, loading space width: 1,800 mm, loading space height: 1,600 mm, Equipment: all wheel drive, cooling unit, PIAGGIO NP6 GPL DOPPIA RUOTA FURGONE ISOTERMICO CON GRUPPO REFRIGERANTE THERMO V 200 MAX (-20) STRADA/RETE NUOVO IN PRONTA CONSEGNA DA IMMATRICOLARE..... EXTERNAL DIMENSIONS 2700X1800X1600 INTERNAL DIMENSIONS 2540X1640X H 1440 VERSIONE START IN ALTRE SEDI DEL NOSTRO GRUPPO SIAMO CONCESSIONARI UFFICIALI MERCEDES-BENZ TRUCK SEDE NAPOLI (NA) DOMENICO ESPOSITO SEDE EBOLI (SA) CONCESSIONARIO UFFICIALE FORD TRUCK DOMENICO TRUCK SRL SEDE MARCIANISE (CE) SEDE NAPOLI (NA) SEDE EBOLI (SA) E CONCESSIONARIO UFFICIALE PIAGGIO COMMERCIAL DOMENICO ESPOSITO PROPONIAMO AMPIA SCELTA DI VEICOLI COMMERCIALI/INDUSTRIALI MULTIMARCHE USATI ( FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA-MAN-NISSAN-ISUZU-CA SSONE FISSO -GRU-RIBALTABILE-TELONATO-BOX-SPONDA CARICATRICE-CELLA FRIGO- COIBENTATO CON FRIGO- FURGONE) - POSSIBILITA' DI FINANZIAMENTI O LEASING PERSONALIZZATI IN SEDE. TEL. 0- Gjdpfx Aohrhvrshvjip ORARI APERTURA SEDE: LUNEDI-VENERDI 8:30/19:00 SABATO 08:30/14:00

Condition: good (used), Code: 0230 Giodpfoxn Stcsx Ahvop Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Technical data: Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9 Transport not included

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* Giedpfstphy Aex Ahvep - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117