Vertical machining center

DMG DMC 635 V

Condition: excellent (used), Year of construction: 2012, Technical data: 3-axis machine: X, Y, Z Travel ranges (X/Y/Z): 635 / 510 / 460 mm CNC control: SIEMENS 840D Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Number of positions in the tool changer: 30 Spindle speed: 20 – 12000 rpm Motor power: 13 kW Dimensions (length x width x height): approx. 3400 x 2450 x 2800 mm Machine weight: approx. 4.3 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Rcodpfxozn Rane Amysd

Condition: like new (used), Year of construction: 2021, operating hours: 967 h, functionality: fully functional, machine/vehicle number: 90135010410, total length: 4,300 mm, total width: 2,070 mm, total height: 3,040 mm, overall weight: 9,000 kg, hopper volume: 3,000 l, rotational speed (max.): 10 rpm, blade width: 40 mm, torque: 40,000 Nm, power: 88 kW (119.65 HP), rotor width: 900 mm, input voltage: 400 V, type of input current: three-phase, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, Schomberg twin-shaft rotary shear ES 90/135-D with base frame, hopper and Siemens S7 1212C control cabinet. Powerful 88 kW metal shredder for scrap processing, plastics recycling, or waste treatment. Rcodpow E H Npefx Amyjd

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Rjdpfx Ajy Rzbwsmyjcd Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: ready for operation (used), Year of construction: 2006, A vertical CNC machining center DMG is offered. Travel X/Y/Z: 635mm/510mm/460mm, spindle-to-table distance: 120mm-580mm, table size X/Y: 790mm/560mm, table height: 720mm, max. table load: 600kg, feed rate X/Y/Z: 20m/min, rapid traverse X/Y/Z: 25m/min, max. feed force: 5kN, max. spindle speed: 8000rpm, max. spindle power: 18.9kW, max. torque: 100Nm, tool holder: SK40, tool magazine: 20 positions, max. tool diameter: 80mm, max. tool length: 250mm, max. tool weight: 6kg, tool change time: 1.6s, control: Heidenhain iTNC 530, total power-on hours: approx. 25232h, spindle running hours: approx. 8801h. Inspection possible by appointment. Redpfxozli U Es Amyjcd

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Rodpfjx Ivkzsx Amyocd

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: DMG DMC 635 V Control: Sinumerik 840 D solution line mit shopmill Year: 2008 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Rapid motion: (X/Y/Z): 30 m/min. Spindle speeds: 20 - 10.000 rpm Spindle motor: 9 / 13 kW Rodpozinciofx Amyscd Tool: SK 40 Toolchanger Tool capacity: 20 Table size: 790 x 560 mm Machine weight: 4.000 kg Equipment No chip conveyor Electronical handwheel Linear measuring system in all 3 axes

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: DMG DMC 635 V Rcedpfszi D Axjx Amyod Control: Siemens Sinumerik 840 D Year: 2008 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Spindle speeds: 0 - 14.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 Table size: 790 x 560 mm Max. Table Load: 600 kg Req. space (LxBxH): 2,530 x 1,900 x 2,600 m Machine weight: 4.500 kg Equipment Chip conveyor Internal cooling: bar Working mode: 4 Chip rinsing pistol

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rcsdpfx Amswym Nfjyjd Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Traverse path X: 635 mm Travel Y: 510 mm Z travel: 460 mm Spindle speed: 10,000 rpm Spindle power: 13/9 KW Tool holder: SK 40 Pallet size: 800 x 500 mm Pallet load: 400 kg Tool changer: 30 places Rapid traverse: 30 m/min 3D measuring probe TS 649 Rcodjtk Nzbspfx Amyjd Table probe Rinsing gun handwheel Linear scales

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. • Operating hours: 19,478 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Rodpfx Amsyca Npoyscd Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rodpfx Ajxtu H Nemyocd Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,670 mm, total width: 3,288 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,275 mm, number of axes: 3, This 3s DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with 18.5 kW. The machine has a working area with a table dimension of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V machine we have for sale. Contact us for further details. • Distance table surface / spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine • Tool holder: SK40 • Tool magazine positions: 20 Rcjdpeykaawefx Amysd • With adjacent tool positions free: 130 mm • With adjacent tool positions occupied: 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s • Chip-to-chip tool change time: 6 s • Equipment / features • Electronic handwheel • Air flow through the spindle activated via M function • Working time • Power on: 34,484 h • Spindle running: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. • Operating hours: 17,641 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions Rodpfx Amsyca I Seyecd • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Rcedpfxjyln Eks Amyod

Condition: excellent (used), Working travels 635 x 510 x 460 mm Table size 790 x 560 mm Spindle taper SK40 Spindle speeds -14'000 rpm Tool changer 30 Pos. Control HEIDENHAIN iTNC-530 3D measuring taper Chip conveyor Misc. accessories MARCELS MASCHINEN CH Rsdpfx Aerx Spmjmyocd