Vertical Machining Centre

DMG DECKEL MAHO DMC 64V linear

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 60 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ Dodpfx Aeyz Tkfekvewa • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW • Maximum Motor Power (S6 - 40% ED): 19 kW • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm Dwedew S Efzopfx Akvea swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Dwjdpsx D Ntfsfx Akvja Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Dwsdpfx Aoza T A Dokvoa Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Dwedpfx Akoy Tkgbsvoa Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Dwsdpfx Aksyuzg Hsvea Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) Dwjdpfx Aksylkl Tjvja • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Additional information • A brand-new original DMG spindle was installed by DMG Service in November 2024 • The service report includes both the spindle measurements and the machine geometry measurements taken after the replacement Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Dodpfjvf D Ansx Akvswa

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-620, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED "DOOSAN DNM 4500" vertical machining center with Heidenhain TNC-620 CNC Dwjdjw D Dy Nepfx Akvoa

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table Dodpfeyackdjx Akvjwa - Swivel-Milling-Head (B-Achse)