Double-Column Presse
DIEFFENBACHER PO 2000 (1000)

Name: DIEFFENBACHER PO 2000 (1000)
Brand: DIEFFENBACHER
Availability: InStock

Year of construction

1978

Condition

Used

Location

Goldenstedt Germany

Double-Column Presse DIEFFENBACHER PO 2000 (1000)

Show map

Machine data

Machine type:: Double-Column Presse

Manufacturer:: DIEFFENBACHER

Model:: PO 2000 (1000)

Year of construction:: 1978

Condition:: used

Price & Location

Seller location:: Barnstorfer Straße 3, 49424 Goldenstedt, Germany

Call

Details about the offer

Listing ID:: A4004706

Reference number:: 2031-903

Update:: 07.05.2024

Description

pressure 2000 /1000* t
distance between columns 2650 mm
stroke 500 mm
Redsd Ih Ncopfx Ahzjbt
column travel -side 500 x 1000 mm
diameter of piston 710 mm
number of pistons 2
distance between table / ram 1000 mm
operating pressure 130 / 230 bar
dayligth 800 mm
table length 2500 mm
table width 1600 mm
table height 250 mm
draw back pressure 500 kN
number of T-slots 8
turning speeds 1500 U/min
rapid speed 120 - 140 mm/min
closing speed max. 120 - 140 mm/sec.
return of plunger by small single cylinders 100 - 110 mm/sec
hydraulical ram locking
cutting sound absorber 300 t
die cushion capacity 200 t
die cushion stroke 250 mm
speed of die cushion 100 mm/sec
frequency 50 Hz
voltage 380 V
quantity of oil 2000 l
total power requirement 93 kW
weight of the machine ca. 100 t
dimensions of the machine ca. 5000 x 2500 x 7200 mm
transport measurements ca. 6500 x 3750 x 2190 mm

1991 assembly of a die cushion, pressure reduction to 1000 tons
reason: tools were only constructed to 1000 tons
press has run in a perfect condition until disassembly. It was replaced by a press line.

important for UVV: press has a hydraulic ram locking!

Seller

Registered since: 2003

112 listings online

Call

Send inquiry

Telephone & Fax

+49 4444 ... show

Fax:

These listings may also fit your interest.

Listing

CNC Turning- and Milling Center Mazak Integrex 200 IV STx1500

Germany

18,384 km

CNC Turning- and Milling Center
MazakIntegrex 200 IV STx1500

Call

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Rjdpfx Ahsx Ih Dgszsbt

See details

Listing

Toolroom milling machine XYZ Machine Tools S L V

Thurmaston

18,691 km

Toolroom milling machine
XYZ Machine ToolsS L V

Call

Listing

Eggstätt

18,448 km

Milling machine
AlzmetallGS 1000/5-T

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Rsdow Awmtspfx Ahzebt Erowa Robot Easy 250 automation with 6 pallets 3D probing system Oil-air lubrication of high-frequency spindle Laser measurement Spindle hours:

See details

Listing

Lorquí

19,581 km

FERLO STATIC AUTOCLAVE 4 BASKETS
FERLO

Call

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. Rsdpfx Aown Hgtohzebt The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Valves.

See details

Listing

Hand swivel bending machine PIESOK XK 2000-2A

Rödermark

18,557 km

Hand swivel bending machine
PIESOKXK 2000-2A

Call

Year of construction: 1970, condition: good (used), machine/vehicle number: 024.0468, Offer 22569 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - bending angle approx. 0 - 135 ° - motorized stroke upper beam - max. stroke upper beam 85 mm - max. adjustment bending beam 80 mm - manual bending process is supported by eccentric weight - connection 400 V - space requirement approx. W 3700 x H 1250 x D 450 mm Rbjdpop Atvmjfx Ahzet - weight approx. 1700 kg

See details

Listing

Industrial robot KUKA Industrieroboter Lineareinheiten 8m KUKA KR180 R2900 KRC4 Linearachse 8m

Heiligenhaus

18,553 km

Industrial robot
KUKA Industrieroboter Lineareinheiten 8mKUKA KR180 R2900 KRC4 Linearachse 8m

Call

Listing

Surface grinding machine ABA Z&B SCHLEIFMASCHINEN GMBH ECOLINE 1206A

Root

18,756 km

Surface grinding machine
ABA Z&B SCHLEIFMASCHINEN GMBHECOLINE 1206A

Call

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Rbedpfxju Hiq Ro Ahzet Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

See details

Listing

Vertical machining center MAZAK VARIAXIS 500

Contamine-sur-Arve

18,946 km

Vertical machining center
MAZAKVARIAXIS 500

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK 40 - Spindle power : 12 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 510 x 510 x 460 [mm] A ROTARY AXIS - Travel : [°] - Indexing precision : 0,001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 400 x 400 [mm] - Maximum weight upon table : 300 [kg] - Max. turning diameter : 500 [mm] - Max. machining height : 405 [mm] PALLET CHANGER - Pallet size : 400 X 400 [mm] - Pallets number : 2 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS - Machine weight : 11500 [kg] MACHINE HOURS - Number of working hours : 32763 [h] EQUIPMENT - CNC : Mazatrol PC-Fusion 640 Rsdpfx Ahouhbr Hozebt - Interactive programming - Supports : RS232/RJ45/PCMCIA - Rigid tapping - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor : MAYFRAN - Tool probe

See details

Listing