Stylus grinding

DECKEL S0 (SO)

Condition: reconditioned (used), Year of construction: 1996, Tool and cutter grinder Make: Deckel Model: S0 Tsdpfsx Hx Elsx Amyja Year of manufacture: 1996 – workshop tested Machine no.: 26617 Accessories: - Grinding wheel with flange - Operating manual Used as seen The machine technically corresponds to the condition of its year of manufacture.

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Todpfx Amsx D Ikpjyea Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: reconditioned (used), EWAG WS 11 is a Tool and cutter grinder designed for precision, high accuracy and reliability. X/Y/Z travel 100 mm; grinding-wheel Ø75 mm; A axis -135°/+30°; workspindle 100–1300 rpm; vertical head travel 100 mm; collet nose 20 W. Wheel spindle 2500–7100 rpm; 380 V 60 Hz; 0.4 CV; ~350 kg; 1000×1000×1800 mm. Accessories: set of collets, flanges, wheel arbors, lamp, Z feed unit. Achieves tight tolerances; suited to automotive, aerospace, watchmaking, medical sectors. Tsdpfx Ameyxnz Toyja

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Tjdoxrcnlepfx Amyea

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. Tsdpef Ekngjfx Amysa • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new Tjdpfx Amomhfrreyea - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: used, Year of construction: 2006, First registration: 11.04.2006 Fendt 307 CI Year of manufacture: 2006 Operating hours: 3,445 Engine: Deutz 4-cylinder turbocharger Displacement: 4,038 cm³ Todpfjyv S Ulox Amyoa Rated power: 80 HP Max. torque: 423 Nm at 1500 rpm Tank capacity: 108 l Transmission: 40 km/h, 21/21 overdrive, shuttle transmission PTO: Powershiftable 540 / 750 / 1000 Hydraulics: tandem pump 70 l/min at 200 bar Rear lift capacity: 48.9 kN 2 double-acting spool valves, cross control lever Brakes: hydraulic brakes Cabin: air-suspended driver's seat, roof hatch, height and tilt-adjustable steering column, heater (no air conditioning) Front loader with parallel guidance, without third control circuit Sale subject to margin taxation in accordance with § 25a UStG Location: not specified

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m Tsdpovvtpxsfx Amyoa The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle Tsdpfxsy S A Rio Amyja - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 units CNC Brother models S500X1/S700X1. Year of manufacture 2014 1 unit with 3 axes 1 unit with 4 axes with hydraulic station Tjdpfxsyap R Do Amyea without vapor filtration system 1 unit with 4 axes with hydraulic station with vapor filtration system