Tool cutter

DECKEL FP 2

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: Ihodpfovbifgjx Ah Net >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 2007, Technical data: Centre height: 500 mm Swing diameter: 1090 mm Swing diameter over cross slide: 690 mm Centre distance: 1500 mm Spindle speeds: 6 – 1250 rpm Spindle bore: 155 mm Digital position display: SONY Bed width: 700 mm Tool holder: MT 6 Ihodpoxlgmfofx Ah Not Motor power: 30 kW CE marking Dimensions (L x W x H): approx. 3500 x 1750 x 1900 mm Weight: approx. 7.5 t Accessories: Central lubrication Coolant system Rear splash guard 3-jaw chuck 500 mm 4-jaw chuck 800 mm The seller is not liable for typographical or data transmission errors. The machine’s condition regarding appearance, technical characteristics, and wear is in accordance with its age; used machines are sold without any warranty.

Condition: used, total height: 16,000 mm, total width: 1,100 mm, total length: 1,500 mm, Empty weight: 1.000 kg Milling machine miller, mill Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400x270x400mm Spindle-speed: 40-2000 pm Table: 700x330mm Spindle-take: ISO40 Motorpower: 2,2kW Machine-dimensions: 1500x1100x1600 Machine-weight: 1000kg. Ihedox S Eayopfx Ah Net - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 1500mm x 1100mm x 16000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm No. of spindle turning rate 18 speeds 40 - 2000 U/min table surface area 730 x 240 mm Ihjdsxqrdtopfx Ah Nst tool adaptor SK 40 flute distance 4 / 12 mm number of feeds 18 feed range 8 - 400 mm/min rapid traverse 1200 mm/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1700 x 1400 x 1700 mm - Robust/powerful universal milling machine - NEWALL digital display - Coolant device

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 01093.01-808, A used L&Z lathe, manufacturer: VDF BÖHRINGER, type: DUE 630, year of manufacture: 1986, machine number: 01093.01.-808. Turning length: 3000 mm Turning diameter: 630 mm. Equipped with 2 steadies, chuck, faceplate, and Multifix toolholder. Isdpfx Asxd Df Neh Noht

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. Ihsdpfx Aheu Nc Twj Net *

Condition: refurbished (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, type of input current: three-phase, rotational speed (max.): 6,300 rpm, rotational speed (min.): 31 rpm, warranty duration: 3 months, year of last overhaul: 2020, Equipment: documentation/manual, We are offering this overhauled DECKEL FP 2NC with TNC 320 tool milling machine, year of manufacture 1982. Manufacturer: DECKEL Ihedpjx Sv Rcefx Ah Net Model: FP 2NC with TNC 320 Year of manufacture: 1982 Condition: Completely overhauled Control: TNC 320 Machine type: Tool milling machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1987, Heavy-duty disc sander Model making machine with electric table tilt and digital display With approximately 20 additional sanding sheets Used, excellent condition, little used Make: L.A.R. Type: LVA D800 Year of manufacture: 1987 Machine no. 87-11-2 Many accessories Iedpfx Ahewi Rn Rj Noht Right table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Left table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Double-sided Disk diameter 800 mm New price approx. €20,000.00 Extraction connection D 140 mm Space required approx. 1500 mm x 1000 mm x 1600 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in as-is condition as seen No guarantee or warranty

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Manufacturer: Deckel Ihjdpeurk Exjfx Ah Nst Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: refurbished (used), Year of construction: 1968, travel distance X-axis: 800 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill travel distance: 80 mm, total length: 1,000 mm, table width: 520 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 2,500 kg, input voltage: 400 V, workpiece weight (max.): 2,000 kg, We are offering this refurbished DECKEL FP2LB milling machine, year of manufacture 1968. Manufacturer: DECKEL Model: FP2LB Year of manufacture: 1968 Condition: refurbished Ihjdpfjx Sdxzjx Ah Not Machine type: milling machine If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Isdpfowchn Ujx Ah Njht Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Iodpfewid Spsx Ah Noht Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Iedpfx Aexbx R Ueh Noht

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: Ihedper En Dysfx Ah Nst - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm Isdpfjx Ndbqsx Ah Neht CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment