Milling machine

DECKEL FP 1

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Isdpfxeyangqo Ah Nsht rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts Ihedpfxefgyico Ah Net 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual Ijdjw Agxrspfx Ah Noht THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: Isdpfx Ahsx Tdy Is Noht X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Ihodpfeglfv Ssx Ah Njt Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6)

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Ihedpex S Edljfx Ah Njt Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Ijdpoq A Icqofx Ah Nsht

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516. -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Ihedpjhwb Utofx Ah Nst Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Condition: good (used), Electric motor, three-phase motor, brake motor -Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from milling machine Deckel FP4L -Power: 4.0 kW -Speed: 1435 rpm -Design: B14 -Protection class: IP 44 Iodjul H Dwspfx Ah Neht -Brake: multi-disc brake type EK5dB24 -Dimensions: 575/270/H225mm -Weight: 64 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, 2-axis active digital display (Heidenhain) Spindle mount: SK40 (S20x2) Travel paths: X 300 / Y 160 / Z 340mm Speed: 40 - 2000 rpm. (2 gear levels) Feed continuously adjustable The machine is in a well-maintained condition and can be inspected on site, with power on. Includes extensive accessories. - Machine vice - Operating instructions / electrical circuit diagram / spare parts list - Collet set (S20x2) including SK40 collet insert - Other accessories on request. Iedpfxjvnr Hys Ah Noht

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual Ihedpfx Ahsgzlpkj Nst height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, 3-axis active digital display (Heidenhain TNC113) Spindle mount: SK40 (S20x2) Travel paths: X 300 / Y 160 / Z 340mm Speed: 40 - 2000 rpm. (2 gear levels) Feed continuously adjustable The machine is in a well-maintained condition and can be inspected on site, with power on. Includes extensive accessories. - Machine vice - Operating instructions / electrical circuit diagram / spare parts list - Collet set (S20x2) including SK40 collet insert - Other accessories on request. Ihjdpfx Ahevnrz Rj Net

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm y-travel: 160 mm Ihedpfxern I Rzs Ah Not z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Ihedpfjr En Dyex Ah Net geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: excellent (used), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis Digital Readout Travel Paths: X/Y/Z: 300 x 160 x 340 mm Manual Adjustment Milling Head Arm: 100 mm Extension of Working Area to: 300 x 260 mm Spindle Speed Vertical/Horizontal: 40 – 2,000 rpm Gear Steps: 16 Spindle Taper: SK 40 Tool Fixture: S20 x 2 (Deckel Standard) Quill Travel: 60 mm Feed X/Z Axis: 5 – 500 mm/min Feed Control: stepless Rapid Traverse X/Z Axis: 1200 mm/min Feed Y Axis: manual Fixed Angle Table: 600 x 210 mm Tilting Vertical Head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: For horizontal machining, the milling head is swivelled 90 degrees and slid to the rear. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Infinitely variable feed on X/Z axis The machine underwent partial overhaul by a specialized company a few years ago. Ihedpfoxyc N Ejx Ah Net Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: good to very good from training workshop Available from March 2026