Used Degen for sale (9)

Condition: ready for operation (used), grinding wheel diameter 120 mm spindle speed: 4400 UpM Pgedpfx Ajxr Rapogwou total power requirement 1,1 kW weight of the machine ca. 135 Kg dimensions of the machine ca. 0,7 x 0,5 x 1,2 m Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Specifications: Pgodexnlknspfx Agwou Workpiece diameter approx. 1–25 mm Cutting-off spindle approx. 8,800 rpm Grinding spindle approx. 4,400 rpm Cutting-off wheel 125 x 1.5 x 20 mm Grinding wheel 100 x 50 x 20 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Podpfjxm S Hyox Agwsgu Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Total weight: 2,000 kg

Condition: excellent (used), Year of construction: 2000, The machine is in very good condition 1500x600 Podpfx Agsxl Ay Iewsgu

Condition: refurbished (used), Year of construction: 2025, Function The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave Pgodpefig I Nsfx Agwsu the micrometer screw at 0-position at all times. Your advantages: • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Pjdpfx Aowxaf Regwjgu Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Condition: reconditioned (used), Year of construction: 1992, Precision cutting machine Make: DEGEN Model: TAM 25/600 Year of manufacture: 1992 - partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / Pgjdohfwfaepfx Agwsu Mach. No.: 1017 with guarantee geometric acceptance with test report Accessories: - coolant system - operating instructions - used, as seen -

Condition: ready for operation (used), Degen TAM 25/600 cutoff grinding machine, grinding machine, precision cut-to-length machine Workpiece diameter: 0.8 - 25mm Psdpewqcpvofx Agwsgu Workpiece length without stop: max. 300mm Workpiece length with stop: max. 600mm Cutting spindle speed: 8800 rpm Grinding spindle speed: 4400 rpm Cutoff wheel: Ø125 x 1.5 x Ø20mm Grinding wheel: Ø100 x 50 x Ø20mm Weight: approx. 140 kg Dimensions: approx. 800mm x 450mm x 1100mm (W x D x H) You are welcome to come by for a viewing. We can also organize a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. The requirement is a valid VAT identification number. Subject to prior sale. Visit our shop and have a look at our other offers as well. Stated company names and trademarks are the property of their owners and are used solely for identification and description of the products. Deviations from technical data and errors in article descriptions may occur and remain reserved.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 286, workpiece weight (max.): 2,000 kg, spindle speed (max.): 3,000 rpm, travel distance milling slide X-axis: 650 mm, travel distance milling slide Y-axis: 300 mm, travel distance milling slide Z-axis: 600 mm, swivel angle A-axis (min.): -20 °, swivel angle A-axis (max.): 20 °, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis (transverse): 650 mm Y-axis (vertical): 300 mm Z-axis (drilling axis): 600 mm A-axis (swivel range of the drilling axis): ± 20° W-axis (table adjustment): 650 mm Control: Siemens Simatic OP17 Drilling capacity Maximum drilling depth: 900 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 4 – 20 mm Thread cutting: M 16 Drilling spindle Spindle mount: MK 2 Spindle speed: 0 – 3,000 rpm Spindle drive (60% E.D.): 6.0 kW Spindle drive (100% E.D.): 4.1 kW Workpiece table Dimensions: 1,100 x 650 mm Swivel range: ± 360 degrees Load capacity: 2,000 kg MACHINE DETAILS Pgedpfx Asv Iay Usgwsu Length: 2,620 mm Height: 1,637 mm Table height: 950 mm Width: 1,485 mm Weight: 1,600 kg X-axis (transverse): ball screw with servo motor Y-axis (vertical): ball screw with servo motor Z-axis (drilling axis): rack and pinion drive with servo motor W-axis (table adjustment): ball screw with gear motor