350X700MM ANGLED SEMI-AUTOMATIC SAW

CRONOSSTECH CRONOSS 350 YDG

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads Blodpfsfy U Ewox Ab Ter - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: as good as new (ex-display), Heating: steam Bsdephnz Nepfx Ab Tolr Control panel: ADITEC Base width: 157 cm Base depth: 240 cm Corpus height: 264 cm Min. room height: 320 cm Recommended room height: 330 cm Smoke-trolley dimensions (HxWxD), cm: 200x100x100 Connected load for HP heating: 60,5 kW Smoke generator width: 50,0 cm

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm Blsdsfg E Hlopfx Ab Tsr dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Blsdpfx Abschhfue Tsr Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: new, The fine blasting unit type FB 1 has been specially designed for mobile use. Based on the proven "sandmaster" fine blasting system, in combination with the pneumatic control, the unit can be used extremely flexibly. Furthermore, the FB 1 fine blasting unit can be ideally combined with other blasting booths of the injector series by means of the optionally available console. As an exclusive distribution of sandmaster in the area of Baden-Württemberg we offer as IS Zubehör GmbH from our showroom the fine blasting unit type FINE-BLASTER FB 1. - sandmaster" fine blasting system - abrasive grain size Mesh 46 - 180 - Nozzle diameter 0.8 - 2.7 mm - Completely pneumatically controlled - Dimensions 210 x 350 x 310 mm (W x D x H) Bsdpfedrfqtsx Ab Telr The unit can be viewed in our showroom in Stuttgart by prior appointment and would be available immediately.

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Bljdpfx Aepgnftob Tsr Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: used, mileage: 143,413 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 3,500 kg, empty load weight: 2,550 kg, maximum load weight: 950 kg, first registration: 03/2011, next inspection (TÜV): 03/2025, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, CO₂ emissions: 259 g/km, emission class: euro5, color: yellow, driver cabin: other, suspension: other, number of seats: 2, Year of construction: 2011, total length: 7,057 mm, construction height: 2,690 mm, fuel: diesel, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Engine failure. The Mercedes-Benz Sprinter 310 CDI Maxi Euro 5 box van offers a solid base for commercial users. This used commercial vehicle from 2011, first registered on March 17, has a mileage of 143,413 km. It is powered by a 2,143 cc, 4-cylinder diesel engine with an output of 95 hp (70 kW), which meets the Euro 5 emissions standard. The Sprinter is equipped with an automatic transmission and rear-wheel drive, making it ideal for transport tasks. It has room for two people inside, and the cargo area is equipped with shelves, making it useful for a variety of applications. The vehicle has a yellow paint job and a green environmental sticker (4). The vehicle's general inspection is valid until March 2025. With a combined fuel consumption of 9.8 l/100 km, the Sprinter is efficient for its class. CO2 emissions are 259 g/km. The vehicle's dimensions are 2,694 mm high, 2,100 mm wide, and 7,057 mm long, with a wheelbase of 4,325 mm. The gross vehicle weight is 3,500 kg. Please note that this model has engine damage. Inspections are possible without prior notice. Sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. Bjdouag N Ijpfx Ab Tolr

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Bsdpfovbcxtex Ab Tolr Main motor 41kw Movie available

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: FN41918, Year of construction: 2011, load capacity: 2,500 kg, lifting height: 2,900 mm, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, empty load weight: 3,310 kg, color: yellow, Equipment: cabin, Forklift trucks | Electric forklift trucks Electric 4/wheel forklift truck from Jungheinrich Type EFG 425 K Year of construction 2011 Viewing is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bedpfx Absrwxkwe Tjlr #Tags: Jungheinrich | EFG 425 K | EFG425

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 Blsdpoivawpjfx Ab Tor No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20