Recoiler - interchangeable mandrels 10 t

COMEC

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Lodetvfmhjpfx Afaerk Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm Lrjdpfx Afow A I Uueaek control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: excellent (used), functionality: fully functional, Comec FMC 900 3M-I Drilling Machine Automatic loading from magazine Number of spindles: 4 Main motor power: 4 kW Max workpiece length: 900 mm Lrsdpfx Afsy A I R Ajaek Max workpiece width: 100 mm Maximum drilling distance: 800 mm Drilling capacity depending on material length: 500–1100 pieces/hour Suitable for large production series of chairs, beds, cribs, as well as components of other furniture

Condition: excellent (used), functionality: fully functional, Comec FXT Double-Sided Milling Machine Lrjdsyxm R Hjpfx Afajk Number of milling units: 4 Unit arrangement: Right/Left/Top/Top Milling unit power: 4×0.85 kW Spindle speed: 12,000 rpm Feed speed: adjustable via variator

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Lredpfxsu A U Utj Afask

Condition: used, Year of construction: 2006, Working width ca. 1.000 mm feed: pneumatisch Lrjdpfxsx Ivk Uj Afaek Spindle diameter 40 mm

Condition: new, Year of construction: 2024, functionality: fully functional, PTR1600L Carmec Pressure tester for cylinder head and block - new machine Hydraulic tray lifting, motorized tray rotation. Max. cylinder head dimensions: 1350 mm x 300 mm × 395 mm Max. cylinder head weight: 300 kg Adjustable pressure air test: 0 bar -10 bar Adjustable working temperature: 0 - 90°C Stainless steel tank capacity: 540 Liter Heating power: 2× 4,0 kW Hydraulic unit power: 0,75 kW Rotation motor power: 0,18 kW Lrodpeu S Eqnefx Afaek Maximum vertical travel distance: 600 mm Up and down travel time: 10s Rotation speed: 4 RPM Supply voltage: 220-440V 3Ph+E ( +/- 10% ) Frequency: 50-60 Hz Operating voltage: 24 V AC Empty tank: 440 kg Machine dimensions: 2050 mm × 1120 mm × 1650 (max. H) mm If you are interested, please contact me! More machines for sale: Berco, Comec, A-M, Carmec, Kwik-Way, Serdi, PEG Connecting rod boring, cylinder boring, honing machines, valve seat milling, parts washer, valve grinder, line boring, valve guide press machine, pressure test bench, resurfacer, vacuum tester, valve spring compressor, crankshaft polisher machines

Condition: new, Year of construction: 2026, CIDAN Machinery manufactures coil handling slit and cut-to-length lines that can be programmed and operated by skilled and non-skilled users alike. Our cut-to-length machines are all-in-one units built to withstand high-level production over the course of time while taking up as little space as possible. CIDAN Machinery provides many of their cutting-edge features as standard – straightening units, sheet guide for in-feeds, guillotine shears with hold down beam and double-edged blades, feeding units, foot pedals for remote feeding, and many more. Lrsdpemfrgrofx Afaek In order to provide the absolute best technological options from around the globe, CIDAN Machinery has partnered Forstner Machinery, a world-wide leader in slit and cut-to-length machines Since 1960, Forstner has been developing and manufacturing machines for professional coil processing. Our partnership has provided us the opportunity to bring all of their best machines to you! - Sheet metal on coils saves money, reduces waste and frees up storage space. - We have the right solution for all levels of production. - Free up floor space with coil processing and increase your productivity and your profits. - The extensive range of Forstner products can be combined to make an efficient production facility based on your requirements, where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. - With our solutions you can easily process coils from 500 kilos up to 8 tons. Bigger coils mean fewer changeovers, less waste and a more efficient process. - How many different materials do you need readily accessible? Frequent changeovers? With a coil selector you keep eight different materials ready at the cut-to-length for far quicker changeovers. - With a well equipped cut-to-length in your production facility you will no longer need to cut strips in guillotine shears. - Do you sell sheets or do you want to recoil material in smaller coils? We have the right solution for you! - Rational coil handling cuts your lead times, frees up production space and reduces tied up capital in stocks.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 160403, working length: 500 mm, power of feed motor: 7,500 W, HORIZONTAL MILLING MACHINE COMEC FRO 500 - CE RULES - Working width 500 mm - Motor 7.5 kw Ljdpfeywcgnjx Afaerk - S/N 160403 - Year 2016

Condition: used, Comec FM0/2000/CA Horizontal drilling machine with loader 6 horizontal heads + about ten other replacement heads and mandrels (see photo) Lodpferkctcjx Afasrk 4 belt-driven motors Working length 200 cm

Condition: new, Year of construction: 2025, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc. Ljdeiuz T Iepfx Afasrk

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, number of axes: 3, spindle motor power: 5,600 W, spindle speed (max.): 18,000 rpm, This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. • Machine frame: Heavy-duty mono-block structure in electro-welded steel • Spindles: • Vertical electro-spindles: 3 • Drilling spindle • Power: 1.7 kW • Speed: 4350 rpm • Point-to-point drilling head: • 5 vertical drilling spindles (32 mm spacing) • 3 double-exit horizontal spindles along Y-axis (32 mm) • 3 double-exit horizontal spindles along X-axis (32 mm) • Milling/mortising spindle • Power: 7.0 kW • Speed range: 12,000–18,000 rpm • Cutting/milling/drilling spindle • Power: 7.0 kW • Speed range: 8,000–18,000 rpm • Multi-function aggregate included • Horizontal electro-spindle: • Type: Milling/mortising spindle • Power: 5.6 kW • Speed: 12,000–18,000 rpm • Tool holder: ER32 collet • Working area: • Nominal strokes: X 3350 mm, Y 200 mm, Z 180 mm • Two working fields: 2 × 1500 mm • Axes positioning speed: up to 70 m/min • Interpolation: Linear and circular on X/Y/Z (3 axes CN-controlled) • Workpiece support tables: • 4 + 4 tables on adjustable slides Ledox D Hngepfx Afajrk • Each table with 4 + 4 vertical pneumatic clamping cylinders • Frontal and lateral reference stops • Control system: • CAD-CAM control unit • Stand-alone electrical cabinet • Industrial PC with 17" touchscreen • Connectivity: Ethernet, USB, RS232 • Software: Supports NC CAM Suite TPAED132 • Safety and enclosure: • Full perimeter safety cabin • Automatic synchronized front safety door • Polycarbonate panels and safety interlocks • Power and standards: • Supply voltage: 400 V / 50 Hz • CE safety compliance

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic Lodpfx Aeyrr Ngefaork • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: new, Year of construction: 2025, Single band console decoiler 500 mm - Loading capacity 1.500 kg - Inner φ 480-530 mm Ledpfx Afsfvbxqjasrk - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 500 mm

Condition: used, A versatile horizontal end borer that can be used for a variety of drilling operations in solid wood furniture components. Optionally the machine can be equipped with a tilting table. -3hp motor - 2800rpm -Drilling unit advancement via hydrocheck unit. -Drilling head with 5 drills which can be rotated through 360 degrees. -Drill interaxis 3 x 32mm ctres / 3 x 20mm ctres. -Max drilling depth 70mm. Lrodpfoymnk Nsx Afask -Drill connection M10 -Height of drill head and drilling depth adjustable via screws with Siko mechanical digital readouts. -Table with adjustable reference fence adjustable to 45 degrees with pneumatic workpiece clamp. -CE safety protections