Frame press

Casolin Junior

Condition: excellent (used), Working width 3200 mm year of manufacture 1992 motor power 7 kW pressing time adjustment automatic opening Csdpfx Aisypg Rmelogw emergency stop switch - pull cord

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description Cgjdpfxsxpn T Uo Ailjw ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 116387, planing height: 160 mm, planing width: 260 mm, total width: 145 mm, total height: 170 mm, total length: 375 mm, workpiece weight (max.): 2,100 kg, workpiece height (max.): 160 mm, compressed air connection: 8 bar, type of input current: three-phase, workpiece width (max.): 260 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 4, extraction connection diameter: 250 mm, power: 18 kW (24.47 HP), input frequency: 50 Hz, input current: 63 A, Equipment: motor brake, Weinig Cube 4-sided planing machine for sale. Offered for sale due to very little use in our workshop. Originally supplied and always serviced by De Groot Bewerkingmachines. Machine operates perfectly. Currently disconnected and packed, but can be demonstrated in operation upon serious interest. Year of manufacture: 2011 Weight: 2,100 kg Cgedpfx Ajxhcizeiljw Connection value: 400V 63Ah Air pressure: 8 bar Power: 18 kW (25 hp) Extraction connection: 250 mm 1x Max. planing width: 260 mm Max. planing height: 160 mm Minimum planing length: approx. 400 mm Infeed table length: 2,500 mm All values adjustable via touchscreen display Visible removal indication by laser lines Total machine length: 375 cm Total machine width: 145 cm Total machine height: 170 cm Incl. planing heads with knives. This is a good quality machine.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. Cgodpey Ih Rgofx Ailow - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: Cgsdjxymfwopfx Ailjw - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Cedpfxjyapi Ho Ailjgw Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe Cgjdoykbcaopfx Ailjw • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Codsumci Sepfx Ailjgw Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Cgjdpsv Dfp Hjfx Ailsw Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Throughfeed moulder ideal for companies working profiles for windows, doors, stairs, beads, frames and furnishings. This machine was in display in showroom, fully functional, 0 (zero) working hours Packed and ready for loading within 3-5 days after order confirmation. Stored in warehouse in Croatia Codpfx Aoy Hu Susiljgw