Aspiration system OT 6500 m3h

Optimat OT 6500 m3h

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg. Isdpsxw N Uvefx Am Hjtl

Condition: good (used), Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine Isdped A Idxsfx Am Hotl -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Itedpfxeyi Efce Am Hel Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Itjdpfx Amjffamvs Hjl Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Isdpfeytp Hrox Am Hotl

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle Itodpfx Amsx Rw Iyj Hjl - Year 1994

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Itjdslnanwepfx Am Hol

Condition: new, Year of construction: 2023, machine/vehicle number: 23-04-35-001, F 25 Version 3 Manual height and swivel adjustment 0 - 46° of the saw blade with digital display. Motor 5.5 kW, 2 speeds 3,600 / 4,200 rpm. Double roller carriage 3200 mm, Parallel fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting length up to 3450 mm, Basic scoring unit with LED light Saw blade diameter max 315 mm, saw blade projection max. 104 mm, Cutting height max. 100 mm, at 45° max. 70 mm, Iedpfx Amef A Ehtj Hetl Large dust extraction hood (PSV), incl. option for front support roller, immediately available from stock in Seevetal, subject to prior sale Ex works, excluding transport, assembly and instruction.

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Isdpfxeyg Nu No Am Hjtl

Condition: excellent (used), Year of construction: 1988, manufacturer: LÖDIGE year of construction: 1988 type: FKM 4200 D Itederywvdjpfx Am Hsl e-engine: 75 kW Siemens