Hydraulic Try-out Press

Calende 110T Werkzeugprobierpresse

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Requested power: 18,5kw Prsdpfxegy Hzpo Adnod 2 precision cylinders steples adjustable strokeend

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" Prsded Sitkjpfx Adnod spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm Prjdpfeqv Iw Tsx Adned spindle bore 132 mm feed längs 0,039 - 18 mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Year of construction: 1998, condition: good (used), machine/vehicle number: 3862-8063-564, Offer 23036 Technical data: - Drilling capacity into solid steel ST 60 32 mm - drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm Prodpfx Ajkzg T Rsdned - 3 drilling feeds 0.1 - 0.3 mm - min / max distance spindle - table 310 / 610 mm - drilling radius min / max 400 / 1200 mm - table height 720 mm - table size 1200 x 500 mm - drive 400 V / 1,6 / 2,9 kW - space requirement approx. W 1200 x H 2800 x D 2300 mm - weight approx. 1500 kg - with: - thread cutting device - hydr. columns + jib clamp - coolant device - T - grooves vertical at the rear side of the machine

Condition: excellent (used), Year of construction: 2006, Sheetlength: 3100 mm Cutting capacity: 6 mm Backgauge reach: 750 mm Featured with: - 3 Sheetsupports frontside - Access protection backside Psdpfon Smtqox Adnord - Footpedal Motor power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg Predpfx Aeh Ha Ipsdnod 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: used, Year of construction: 1992, closing pressure 600 kN Prjdpfsfrvzvjx Adned clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, length:1800 mm width:1200 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m Pedjcxxu Dopfx Adnord

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min Pedpeu Rt I Ijfx Adnerd rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Prsdpfxjhcfzke Adnsd Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500