Vertical machining center

BROTHER TC-S2A-O

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000h Specifications: Gjdpfexqct Ssx Ahveip - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. - Maximum tool diameter: 89mm (adjacent tool slots filled) - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,205 h, load capacity: 5,000 kg, lifting height: 3,925 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Gjdpst Iy Rvjfx Ahvoip Load center: 500 Mast type: Triplex Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 840Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: TOP CONDITION !!! - GENERALLY REFURBISHED by LINDE !!! Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, CE certificate, safety light, LED, Container compatible, Double pedal control, Integrated charger, Battery 92 % residual capacity !!!

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min Giedpfx Ahjxab R Ujvop saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: good (used), Year of construction: 2008, BROTHER B00 CONTROL UNIT AXIS TRAVELS: TRAVELS: Z 415 X 550 Y 400 MM. DISTANCE BETWEEN TABLE AND SPINDLE NOSE 645 MM. RAPID TRAVELS XYZ 70 M/MIN. WORKING SPEED XYZ 1-20000 MM/MIN. Giodpfju Spr Eex Ahvsp REPEATABILITY ERROR +/- 0.003 MM. POSITIONING ERROR 0.005 ON 300 MM. N.2 TABLES WORKING AREA 600x425 MM. PERMITTED WEIGHT 200 KG. TABLE POSITION 3.4/180° SPINDLE POWER 16 KW SPEED 12000 RPM HSK TAPER A 40 RIGID TAPPING 8000 RPM MAX TOOL CHANGE TOOL MAGAZINE CAPACITY 40 PLACES TYPE OF SELECTION RANDOM TOOL CHANGE TIME 0.9 SEC. CHIP/CHIP TIME 2 SEC. OPTIONS CHIP CONVEYOR SPINDLE OVERRIDE WORK AREA LAMP ROTARY JOINT COOLANT THROUGH SPINDLE N.2 LEHMAN IV AXIS TABLES COMPLETE WITH COUNTER-SUPPORT

Condition: used, Year of construction: 2007, Urban AP 6500 F - travelling column milling machine - Heidenhain path control iTNC 530, control panel can be moved over the entire machining length - robust basic structure as a welded frame construction - ball rail guides on all axes - milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y-/Z-axis with recirculating ball screw (20 m/min) - 6 chip drawers - swivel clamping device for 6200 mm workpiece length - 12 pneumatic workpiece clamps - manually operated central lubrication - moving plate tool changer for 8 tools - micro spray - cooling emulsion pump - machine light Gsdpfxou Awm Sj Ahvsip - safety fence - safety bumper - safety light grid - machine protection hood opens pneumatically vertically - control on: 33922 h - Program run: 9847 h - Spindle on: 7221 h - Year of manufacture 2007 Technical data - Travel paths X/Y/Z: 6500 / 275 / 310 mm - Working area X/Y/Z with swivel device: 6200 / 155 / 110 mm - Rapid traverse X/Y/Z: 30 / 10 / 10 m/min - Continuous feed: 0 - 5000 mm/min - Tool change: Disc changer with 8 tool positions - Tool holder: SK30 - Tool clamping: pneumatic - Coolant system: Micro-spray for flow drilling, cooling emulsion - Spindle speed: 80 - 6000 rpm - Speed correction: 80 - 120 % - Drilling capacity in St60/Alu Ø: up to 18 / 20 mm - Thread cutting capacity: up to M14 / M16 - Position measuring system: rotary encoder - Positioning accuracy: 0.05 mm - Repeatability: 0.025 mm - Machining accuracy tolerance: ± 0.2 mm - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Noise emission: 79 dBA - Motor power: 15 kW - Electrical connection: 3x 400 V ± 5% / 50-60 Hz - Pre-fuse: max. 25 A - Power consumption: approx. 13 kVA - Control voltage: 24 V DC - Space requirement with safety fence: approx. 34 m² (11.4 x 3 m) - Machine weight with accessories: approx. 5000 kg

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Gijdpfxow Hqx Re Ahvep Nationwide delivery (Germany) within a maximum of 7 days after order. General machine data: Machine type: Quick Vision APEX QV-T1404 Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control: Mitutoyo QV Remote Box Operating manual: Available Hardware and software equipment: PC/CPU: Brand new Monitor: Brand new Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measurement applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive range of accessories, including the Renishaw probe and calibration sphere, enables diverse measurement tasks. Kneissl Messtechnik GmbH is a trusted partner of Mitutoyo. Thanks to our close cooperation, we can respond individually to customer requirements and make specific adaptations to the Mitutoyo Quick Vision Apex.

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. Godein Etzepfx Ahvsip AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: used, Year of construction: 2018, Diesinking / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Giodpfsvtftwjx Ahvsp Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 pcs CNC Brother model S500X1/S700X1. Year of manufacture 2014 3 UNITS WITH 3 AXES Gisdpfxjyap R Do Ahvep 1 UNIT WITH 4 AXES STANDARD TABLE WITH HYDRAULIC UNIT WITHOUT VAPOR FILTRATION SYSTEM 1 UNIT WITH 4 AXES STANDARD TABLE WITH HYDRAULIC UNIT WITH VAPOR FILTRATION SYSTEM

Condition: excellent (used), Year of construction: 2008, For sale: CNC BROTHER in very good working condition. Gijdpfxoyapylj Ahvop