Drilling and Milling M/C

BERNARDO KF 20 L Super

Condition: new, table length 1200 mm table width 800 mm 28 mm table height 450 - 800 mm 500 kg weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. Tedpfx Afeh Dqb Se Tof

Condition: new, bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 50 mm 20 mm spindle taper MK 2 spindle diameter mm spindle turning speed range 100-1500 / 200-3000 U/min 175 mm 280 mm table surface area 500 x 180 mm Tsdourznwepfx Af Tef connected load frequency 230 V total power requirement 0,85 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 23 mm Tedpet Hw Sbsfx Af Tjf x-travel 400 mm y-travel 285 mm total power requirement 3 kW weight of the machine ca. 1.400 kg dimensions of the machine ca. m

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm Tsdpfsvtthiox Af Tef drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING Todpfxjud H Huo Af Tjf 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes Todefu Ivzjpfx Af Tef • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 Tsdsv Iamzepfx Af Tof For further information, please contact us

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: Tedpfx Afjcntp Do Tjf - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm wheels incl. Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 28 mm bore capacity in steel perm. 24 mm spindle taper ISO 40 DIN 2080 Tsdoxgu Imepfx Af Tsf Shank diameter 32 mm quill stroke 115 mm x-travel 500 mm y-travel 250 mm z-travel 541 mm turning speed range - spindle 115 - 3.100 U/min transmission ratio 3 transmission ratio 1 115 - 600 U/min transmission ratio 2 270 - 1.400 U/min transmission ratio 3 590 - 3.100 U/min motor 2,2 kW table surface area 850 x 240 mm T-slot - width 18 mm T-slot - distance 80 mm weight of the machine ca. 480 kg dimensions of the machine ca. 1,4 x 1,1 x 2,5 m Drilling and Milling M/C OPTIMUM - OPTImill BF 46 Vario - incl. OPTIMUM base cabinet

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Tsdpfjt Ed Ersx Af Tjf Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg