Used Liebherr 80 Hc for sale (227)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Lsdpfowmbnpjx Ahvohd Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: used, Year of construction: 2009, Liebherr crane 160 HC-L 8/16 including remote control: 160 HC-L 8/16 height: 37.5 m, reach 55 m, serial no. 30349039 Year of manufacture: 2009 Incl. the following crane parts: 1 undercarriage cross 2 base ballast A 7.5 to 12 base ballast B 4.8 to 1 boom 611. 10.7m 1 boom 621 8m 2 booms 622 10.35m 1 boom 631 5.18m 1 boom 641 tip 1 base tower 12.42m 5 tower section 4.14m "Completely repaired, sandblasted and repainted! This crane has been completely overhauled and is in excellent condition. Old paint and rust layers were thoroughly removed by sandblasting before a high-quality new coat of paint was applied. Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see Homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Ledpfjvx Eccjx Ahvohd Legal: This sales advertisement does not represent an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l Ljdjyt Rvhopfx Ahvohd coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t Ledpeymf Daofx Ahvohd dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, power: 230 kW (312.71 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 31,000 kg, Year of construction: 2017, operating hours: 14,138 h, Equipment: air conditioning, all wheel drive, cabin, Liebherr L580 XPower wheel loader Year of manufacture: 2017 14,138 operating hours Quick coupler Ljdpfxeymda Tj Ahvjhd Bucket Air conditioning Good condition

Condition: ready for operation (used), LIEBHERR - LORENZ S800 / Gear Hobbing Machine - Well-maintained machine with extensive accessories - 1x pallet / change gears - 1x pallet / hobs - 1x pallet / arbors - DOCUMENTATION - Max. workpiece length with tailstock 600 mm - Max. workpiece length with retracted tailstock 800 mm Lhjdsyl Slhjpfx Ahvsd - Max. traverse of milling slide 360 mm - Maximum pitch cut on largest workpiece 5 PI / in standard range 8 PI - Spindle taper – milling spindle MK 5 - Milling arbors 22 / 27 / 32 / 40 mm - Max. milling diameter 186 mm - Max. milling cutter length 170 mm - Max. cutter shift 80 mm - Milling speeds 40 – 220 rpm - Infinitely variable feed rates / horizontal - Infinitely variable feed rates / vertical - Infinitely variable feed rates / tangential - Clamping table without coolant trough 550 mm - Clamping table bore 100 mm - Arbor taper MK 5 Dimensions (LxWxH): 3.6 x 1.8 x 1.9 meters / Weight: 5,000 kg Errors and omissions excepted.

Condition: excellent (used), operation weight: 5,680 kg, Year of construction: 2020, Make Liebherr Model: KUD03355-080WJ18-001-000 Year of manufacturing: 2020 Dimensions LxWxH (mm) 3600 x 300 Weight (kg) ca 5680 Total quantity in stock 3 Country of origin Germany Ljdpfx Ahet H Dzpsvehd Comments Outside diimension 3600mm, Outside ring 126 logs ( 85mm hard to hard), Inside ring 128 logs ( 80mm hard to hard)

Condition: used, This listing is for the Liebherr LKUexv 1610 Mediline Refriderator P48-082 The unit is in full working condition and is ready for immediate release. This is a lab-grade refrigerator designed for high safety applications. Specifically, it’s ATEX 95 / ATEX-certified, meaning the internal design is spark-free and safe for storing flammable or explosive materials. The interior containers are explosion-proof in line with EU Directive 2014/34/EU. Temperature Range The fridge is adjustable between +3 °C and +16 °C, which makes it suitable for a wide variety of lab-stored materials. It uses a digital temperature display (visible from outside) to monitor internal temperature precisely. Size & Capacity External (footprint) dimensions: 820 mm height × 601 mm width × 618 mm depth. Lsdpfjxwc Hxox Ahvohd Total gross internal volume: 141 liters, with a net usable volume of 130 liters. Inside it has 3 adjustable shelves (per some spec sheets) for flexible storage. Energy, Cooling, & Refrigerant Energy consumption: about 0.863 kWh per 24h, or ~315 kWh/year. Forced-air (fan) cooling system, which helps maintain a stable internal temperature. Uses R600a (isobutane) as the refrigerant, which is a more environmentally friendly choice

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Lhedjxtu Dhepfx Ahvjd

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 weight of the machine ca.: 14 t table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min Lodjxz Akfspfx Ahvjhd *

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Lhsdjv Dtmmspfx Ahvsd -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: good (used), fuel type: diesel, color: yellow, Year of construction: 2019, operating hours: 5,017 h, Equipment: air conditioning, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: D934 A7-24 Empty weight: 34.600 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: WLHZ1490LZC047884 Other information EPA Marked: yes Delivery terms: EXW Transport dimensions (LxWxH): 10x3,2x3,8 Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Auto lubrication system - Battery disconnector - Demolition/FOPS cab guard - Hammer/shear hydr. circuit - Rotating beacon - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit Ledpox Scf Tsfx Ahvshd - Standard digging bucket - Steel tracks

Condition: used, mileage: 98,831 km, lifting height: 66,000 mm, Year of construction: 2016, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 51.600 kg Functional Lifting capacity: 70.000 kg Identification Serial number: 060 587 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 7415 h Counterweight: 14500 Transport dimensions (LxWxH): 12.5x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information Lhjdpfxjtr Ib Ss Ahved

Condition: used, functionality: fully functional, power: 42 kW (57.10 HP), fuel type: diesel, empty load weight: 6,000 kg, lifting height: 3,500 mm, Year of construction: 2008, operating hours: 6,075 h, total length: 4,500 mm, construction height: 2,750 mm, drive type: Diesel, construction width: 1,850 mm, Wheel Loader Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Pneumatic Rear Tyres Type: Pneumatic Ledpfxsyvwymj Ahvohd Description: Wheel Loader LIEBHERR L506 Stereo — Articulated steering (+ rear axle steering) — Year 2008 — 6,078 operating hours — 2-speed hydrostatic drive, 20 km/h — hydraulic quick coupler — Maximum speed 20 km/h — 4-cylinder Liebherr diesel engine, 42 kW (57 hp) — Excellent, wide tyres approx. 90% — Permissible total weight articulated loader 6,300 kg — Height 2.75 m — Width 1.85 m — Lifting height 3.5 m — Yard loader incl. used pallet forks and used folding bucket — GOOD condition!! Bulk material bucket, quick coupler, + pallet forks Heater, full cab, 2-speed hydrostatic drive

Condition: excellent (used), functionality: fully functional, overall weight: 38,500 kg, Year of construction: 2017, operating hours: 13,326 h, Equipment: quick-change device, Liebherr R946 NLC ZSA/Additional Hydraulics/Air Conditioning/Oilquick OQ80 • Manufacturer: Liebherr • Model: R946 NLC • Year of manufacture: 2017 • Operating hours: 13,326 h • Weight: 38,500 kg • Power: 220 kW / 300 HP • Engine: Liebherr D936A7 6-cylinder • Emission standard: Stage IV / Tier 4f • Fast and slow travel speeds • Mono boom • Central lubrication system • Demolition guard cabin • 360° camera view with Skyview Ledpfx Ahew Rccuevehd • 85% undercarriage condition • Air conditioning • Heated seat • AdBlue • German machine • Immediately available for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and typos excepted. - Sale according to our terms and conditions.

Condition: excellent (used), functionality: fully functional, power: 135 kW (183.55 HP), fuel type: diesel, overall weight: 23,500 kg, Year of construction: 2008, operating hours: 17,871 h, Liebherr LR 634/Track Loader/Rear Ripper • Manufacturer: Liebherr • Model: LR 634 • Year of manufacture: 2008 • Operating hours: 17,871 hrs Lhjdpfox Ig Uqex Ahvod • Power: 135 kW/183 hp • Maximum speed: 10 km/h • Engine speed: 1800 rpm • Bucket width: 2.53 meters • Rear ripper with 3 teeth • Air conditioning • ZSA • Total weight: 23,500 kg • German machine • Ready for immediate use

Condition: used, Year of construction: 2023, operating hours: 1,200 h, Equipment: ABS, all wheel drive, Liebherr 504 Compact Year: 2023 Ledpfjylglijx Ahvehd Only 1,254 hours Tyres in very good condition Quick coupler Forks + bucket Delivery possible Immediately available ----We gladly arrange financing or leasing EU sale: net price with company documents and VAT ID VAT deposit: €2,000 We speak English We speak Serbo-Croatian Our service for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation available - Transfer from Munich Airport or Passau station

Condition: used, Year of construction: 2011, operating hours: 17,000 h, Equipment: ABS, all wheel drive, Liebherr L 576 2plus2 Year of manufacture 2011 17,000 hours Scale Central lubrication system Air conditioning GERMAN MACHINE, first owner Weight approx. 27.5 tons Lodsyiifdepfx Ahvjhd Bucket approx. 4.5 cubic meters Tel: We are happy to take care of your financing or leasing. EU sale: net upon presentation of company documents and tax/VAT number. VAT deposit 2,000 € We speak English. We speak Srpsko-Hrvatski. Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel:

Condition: excellent (used), color: white, Year of construction: 2004, operating hours: 21,817 h, Drivetrain Make of engine: Liebherr Functional Mast: lattice Mast length: 6.500 cm Lifting capacity: 100.000 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Additional information Please contact Christiaan Dekker for more information = Additional options and accessories = - Hook blocks = Remarks = Liebherr LR1100 Year: 2004 Hours: 21817 65 meter boom 23 meter Flyjib Hookblock & Jibball Ledeyhxbfjpfx Ahvehd Hydraulic tilt cabin CE All manuals included Liebherr D936 engine

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 12,235 h, Applicable material: Waste Empty weight: 22.900 kg Make of engine: Liebherr D834 Serial number: 097287 Delivery terms: EXW Please contact Christiaan Dekker for more information = Additional options and accessories = Lodpfxjw I Ex To Ahvohd - Elevating cabin = Remarks = Liebherr LH22 M Year: 2017 Hours: 12235 Liebherr sorting grab 4 x Stabilizer Hydraulic lift cabin Central greasing Webasto heating CE Always Liebherr serviced

Condition: excellent (used), color: other, Year of construction: 1987, operating hours: 19,498 h, Drivetrain Make of engine: Liebherr Functional Mast: lattice Mast length: 2.100 cm Lhedpovivihefx Ahvjd Lifting capacity: 45.000 kg Condition Technical condition: very good Visual appearance: very good Identification Serial number: 183001 Other information Delivery terms: EXW Production country: DE Additional information Please contact Christiaan Dekker for more information = Additional options and accessories = - Hook blocks = Remarks = Liebherr HS841HD Year: 1987 Hours: 19498 21 meter boom 16 ton free-fall winches + crane option ( ZHP 4.27) Liebherr 6 cylinder engine Hookblock + jibball Lifting computer hydraulic retractable undercarriage

Condition: good (used), power: 215 kW (292.32 HP), fuel type: diesel, color: other, Year of construction: 2018, operating hours: 17,484 h, Year of manufacture: 2018 Number of cylinders: 6 Dimensions (LxBxH): 956 x 300 x 359 cm Make of engine: Liebherr Working width: 300 cm CE mark: yes Technical condition: very good Visual appearance: good = Additional options and accessories = Lhodpfx Aox Izvijhvsd - Beacon(s) = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Germany Condition CE type: CE

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 8 (10) Lhsdpfxoyv Ipfs Ahvsd min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Ljdsx R U Hmepfx Ahvshd Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: excellent (used), color: grey, lifting height: 39,000 mm, mast type: telescopic, Year of construction: 2019, operating hours: 9,631 h, Drivetrain AdBlue system: Yes Make of engine: Liebherr Weights Empty weight: 63.100 kg Functional Mast length: 4.000 cm Lifting capacity: 60.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: 096557 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Carrier engine: D934-A7-SCR Counterweight: 25600 Transport dimensions (LxWxH): 11,385x3x3,145 Production country: DE Min boom length: 1000 cm Lsdpfx Aheyual Ujvehd Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Ad blue - Hook blocks