Vertical machining center

Bauer Maschinenbau 94424 Arnstorf Bohrmax Z 30

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2018 Machining length: 7,200 mm 3-axis control with 15" monitor Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light curtain at the front and lateral safety fence Minimum quantity lubrication system Centralised lubrication system Njdpfx Afjwynitoroli Thread cutting without compensating chuck Easy programming via hand control unit High-speed spindle up to 18,000 RPM Includes 3 angle heads X-Axis [mm]: up to 7,200 / 7,200 Y-Axis [mm]: up to 485 / 310 Z-Axis [mm]: up to 340 / 260 Traverse speed X/Y/Z-Axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 RPM Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) Nlsdelxyhfepfx Afrsi each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers Nlodefu Itbjpfx Afrsi

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Table length: 9000 mm Nlsdpfx Afowc Ndworoi Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Condition: new, Year of construction: 2024, Drill head vertically above the table, in the x-axis (longitudinal) on x-axis with linear guides, servo motor and precision gear rack - Horizontally (Y) and vertically (Z), the drilling head is mounted on linear guides by means of ball screw and servo motor - Infinitely variable speed adjustment 160-3800 rpm - SK 40 tool holder - Drive motor 7.5 kW - Coolant system - Pneumatic tool clamping - 4 T-slots M12 lengthwise - Tool change for 10 tools - Automatic tool length measurement - Manual control unit for manual movement of the individual axes - Freely definable work areas with their own zero point and parking spaces 1 BOHRMAX Z 40 Travel distance: X = 4,050 mm Basic equipment for every BOHRMAX type: - Drilling head vertically above the table, in the x-axis (longitudinal) on x-axis with linear guides, servo motor and precision rack precision rack - Horizontally (Y) and vertically (Z), the drilling head is mounted on linear guides by means of ball screw and servo motor - Infinitely variable speed adjustment 160-3800 rpm - SK 40 tool holder - Drive motor 7.5 kW - Coolant system - Pneumatic tool clamping - 4 T-slots M12 lengthwise - Tool change for 10 tools - Automatic tool length measurement - Manual control unit for manual movement of the individual axes - One office license as an additional workstation - Freely definable work areas with their own zero point and parking spaces Control for every BOHRMAX type: - Operation via a simple and clear Mitsubishi CNC M80 control with 21.5" touch panel incl. external Windows-based PC - Remote maintenance - Network-compatible Tool change for 10 tools Automatic tool length measurement RCS01 manual tool presetter The machine can be delivered in week 38/2024 Nledepr Ul Nepfx Afrsi

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Nljdpfjxcyz Rex Afrsi Condition: Very good, used but like new Available immediately from stock.

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: Njdpsghbkyjfx Afrjli VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, Year of construction: 2025, Thread cutting device Free-cutting device Programmable drilling depth cut-off Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Opt. R1: Stepless spindle speeds with countershaft, speed range 100-2000 rpm Opt. R2: Stepless spindle speeds with countershaft, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm throat depth 300 mm Usable table surface (swiveling) 590 x 450 mm Feed rate 0-300 mm/min stepless Table height adjustment with toothed rack Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor rotary current 400 V pole-changing 1.5/3.0 kW Weight 420 kg Nledpfxed H Rh Re Afrei Option drilling package no. 6: taper arbor B18/ Mk 4, quick-action drill chuck B18/ 3-16 mm, machine vice no. 2 -140 and T-slot screws, 890.00 EUR Option: automatic spindle stop with drill spindle top, 420,00 EUR Option: chip breaking module 420,00 EUR Delivery: free domicile incl. packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: like new (used), Year of construction: 2023, Maxion BS36GL tapping machine. Year of manufacture 2023, including minimum quantity lubrication. Nledewudq Njpfx Afrsi

Condition: good (used), Year of construction: 2017, functionality: fully functional, throat depth: 300 mm, total length: 5,000 mm, total height: 1,980 mm, overall weight: 450 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 300 mm, travel distance Y-axis: 4,000 mm, column diameter: 140 mm, drilling depth: 175 mm, controller model: Siemens S7-1200 mit 7" Farb-Touchdisplay, drive type: Servomotoren, measuring range X-axis: 4,000 mm, normal drilling capacity: 45 mm, thread cutting capacity: M 36, The drilling machine can be used both manually and fully automatically. After each drilling operation, the drill moves fully automatically along the X and Y axes to the next drilling position, thus completing the automatic drilling process. UNIMAX 4 Pillar Drill Powerful, universally applicable pillar drill with continuously adjustable feed rates and spindle speeds. Cycle programming is possible for complex workflows, chip breaking, chip removal, LCD graphics with operator guidance, digital display of speed, drilling depth, and feed, automatic spindle alignment for tool removal, electric drill guard. Technical specifications: Continuous drilling capacity 40 mm* Standard drilling capacity 45 mm* Thread cutting capacity M36 MK 4 spindle Drilling depth 175 mm Thrust 300 mm Spindle/table 70 to 825 mm Table surface 650 x 500 mm T-slots according to DIN 650 14 mm Column diameter 140 mm Total height 1980 mm Weight 475 kg Feed rate 30 to 1650 mm/min Frequency-controlled three-phase motor 7.5 kW Infinitely variable spindle speeds 30 - 2400 rpm Operating voltage 400 V Frequency 50 Hz Mains fuse 16 A Safety contact – plug and connection cable included. Connection only to a VDE 0100-compliant mains supply with a functioning protective conductor. Nedjwfd Ayepfx Afroli Residual current circuit breaker over 100 mA Noise level when idling at maximum possible spindle speed Accessories •Turret head •Drill guard for uni 4+BS 50 •Anti-twist device •Motorized height adjustment •Gas spring relief 25 kg •Flanged spindle sleeve MK4 •Automatic ARBO 20 turret head with 6 mounting holes •A20 gear motor •MK4 driver •Clamping sleeve for attaching the drill head to the drill press •A20 thread cutting spindle for SWE 1 quick-change adapters, 1:1, M3-M16 with LA •Quick-change adapter for SWE 1 taps •Work spindle 1:1 with quick-change chuck •Bilz ASR 25 •Clamping range with ER25 up to D16mm •Tool holder for quick-change chuck •Pneumatic vice, clamping width: 300mm FURTHER PICTURES AVAILABLE UPON REQUEST