EDM die sinking machine

ARD M50F

Year of construction: 1994, condition: good (used), Ziersch & Baltrusch surface grinding machine - with Formmaster 6 / 30 - with belt filter unit - with coolant unit - width: 250 cm - depth: 200 cm - height: 220 cm Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Djdpfx Abjk Ixl Aj Tscr Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady Dodpfx Abjwzmp Uj Tocr # with crowning device # in excellent working condition

Condition: ready for operation (used), Year of construction: 2021, Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible. Dcedpfxjwm Nphe Ab Tor

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Dcedjt Hr Ahspfx Ab Tor Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: used, Deckel Maho Dodpfx Abew Rtd Ao Tecr DMU 70 eVolution

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: Dcjdpfewdub Djx Ab Ter X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min Dcjdou I E Emjpfx Ab Tor surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: excellent (used), Year of construction: 2014, turning length: 1,233 mm, turning diameter: 420 mm, MAZAK model QT SMART 350 M U1250 Dcjdpfx Aborn Txko Ter Year 2014 Mazatrol Smart control unit Max. Turning diameter 420 mm Max. Swing diameter 720 mm Max. Turning length 1,233 mm Spindle motor 30 kW Max. Spindle speed 3,300 rpm Full C-axis Max. Bar capacity 102 mm Spindle nose A2-11 12-station turret 12 stations for driven tools Driven tools 7.5 kW Max. Max. speed of driven tools 4,000 rpm Travels X-axis: 265 mm Z-axis: 1,233 mm Tailstock: 1,265 mm High pressure cooling 15 bar Tooleye Mayfran chip conveyor, ejection right 3-jaw chuck Kitagawa B210, diameter 254 mm Tailstock, MT5 Set of tool holders, 8 fixed holders + 2 attached tool holders Weight 7.200 kg LxWxH: 3,770x1,910x1,900 mm

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Dcedpogbfaxjfx Ab Tjr Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: Elb Type: Smart NG STC SN: 511210608 Control: Siemens, type: Simatic Multipanel Touch Magnetic clamping table, 400 x 600 mm Dcedpfsv T Rhaox Ab Tsr Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle output: 4.3 kW Grinding spindle taper: 36 mm Max. vertical travel: 475 mm Max. transverse travel: 370 mm Machine weight: 3,800 kg Machine dimensions: L/W/H 2,750 x 2,050 x 2,150 mm, Electronic handwheel for Y/Z axis, Dressing unit with dressing compensation/diamond dressing, height adjustable by 22 mm, Wet grinding unit with 50 l cooling pump, 60 l automatic paper belt filter, Distance measurement in the Y/Z axis via rotary encoder