High performance pillar drilling machine

ALZMETALL AB 4 SJ

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 Chsdpfx Afex Iwgqegsc weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW Codpjxcp Sfefx Afgshc weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: good (used), Column drill press Manufacturer: ALZMETALL, Type: AB 4 SJ (approx. year of manufacture: 1970) with coolant system, continuously variable speed control, with 2 gear stages. Max. drilling capacity in steel: 40 mm Spindle mount: MK 4 Chjdpfx Aslq D Akofgec Spindle speeds: 80 - 720 rpm Max. spindle stroke: 150 mm Feed rates: 0.09 / 0.16 / 0.28 mm/rev Table diameter: 560 mm Machine is ready for use.

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm Chjdpfexacilsx Afgec roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm Chjdpfx Aovxpp Hjfgjc spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. Chjdpjudi Unofx Afgec The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Cjdpfxoharwvo Afgshc Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: new, The generator is new, complete with control panel, diesel tank, exhaust, and batteries. Description: Model: NWR150 Ricardo Motor Newpower Generator Power Generator Continuous Power: 135 kVA / 108 kW Maximum Power: 150 kVA / 120 kW Engine: Kofo Ricardo R6105AZLDS, 6-cylinder water-cooled Connection: Power circuit breaker, 5-wire direct connection Frequency: 50 Hz Voltage: 400/230 V Including mechanical speed control, AVR, battery charger, soundproofing, coolant heater, Controller: Comap AMF8, grid feed-in Dimensions: 3030x1130x1810 mm Weight: approx. 1650 kg Diesel tank: approx. 245 L At 100% load: approx. 27.8 L/h At 75% load: approx. 18.1 L/h At 50% load: approx. 14.0 L/h Cedpfx Aonkap Ssfgshc Grid monitoring, grid feed-in, soundproof Ready for immediate use. Additional costs: 250A automatic switch: €1080 plus VAT. Socket outlets - Upon request Shipping: Worldwide transport including unloading is possible at an additional cost. To provide an exact freight price, please send us an inquiry with your data and full address.

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill press, drilling capacity in steel: 12 mm Csdpelub Rdjfx Afgehc Drill chuck mounting: B16 external taper, spindle stroke: 40 mm, overhang: 200 mm, column diameter: 50 mm, usable table surface: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max. 110/250, manual feed, machine height without options: 670 mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth gauge with touch function for zeroing, virtual depth scale on the display, machine status indicators and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC motor 230 volts, 50 Hz, connection plug pre-assembled, cable length 2 m, three separate buttons for clockwise rotation - counterclockwise rotation - stop, Spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment continuously variable via potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Delivery time: from stock, Waiblingen/Beinstein

Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 Cedpfehkkwbox Afgshc tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)