Milling machine

Abene VHF-360 TI

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Guodoxtmqtspfx Ag Dek

Condition: good (used), Width: 700 mm Length: 2000 mm Godovitcljpfx Ag Djuk Panel thickness: 40 mm Height: 850 mm

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Gujdpfowuurwex Ag Djk Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° Guodsty A Ehopfx Ag Dok - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Year of construction: 2014, For sale: 1 CNC lathe Spinner TTC 300, year of manufacture 2014, including single bar loader. The machines are in very good condition, have been serviced regularly, and are ready for immediate use. Guedjw Rbb Aopfx Ag Dok

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Gusdjxtbkuopfx Ag Dek Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Sub-spindle, C-axis FANUC 18i-TB control Turning diameter max 300mm Turning length -366mm Spindle speeds main spindle 30-5000 rpm Spindle speeds sub spindle 30-6000 Turret head: 12 driven positions C-axis Dividing 0.001 degrees Misc. accessories Gujdpfxjwufdqo Ag Dok MARCELS MASCHINEN CH

Condition: used, Year of construction: 2005, CNC Turn-Mill Center CTX 410 - Year 2005 Heidenhain Plus IT control Guedpfxjxlthve Ag Dsk - 3-jaw chuck - Driven tool positions - Tailstock - Chip conveyor - Coolant tank

Condition: excellent (used), Year of construction: 2012, operating hours: 3,355 h, functionality: fully functional, turning length: 450 mm, turning diameter: 200 mm, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,800 kg, For sale is a CNC lathe from the brand Gildemeister, model CTX 310 Eco. The machine is in excellent condition and ready for immediate use. Technical specifications: Year of manufacture: 2012 Operating hours: 3,355 h (see picture) Control: SIEMENS SINUMERIK 810D Powerline Max. turning diameter: 200 mm Max. swing diameter over bed: 330 mm Max. turning length: 450 mm X-axis travel: 160 mm Main spindle speed: 5,000 rpm Spindle bore: 51 mm Turret: 12-station turret (VDI 30) Live tooling: 6 driven tool stations Live tool speed: approx. 4,500 rpm Rapid traverse X/Z: 30/30 m/min Dimensions: approx. 4200 mm x 1700 mm x 2300 mm Machine weight: approx. 3,800 kg Chip conveyor included in the offer. Tool holders not included in the offer (can be offered additionally). Transport and loading can be organized across Europe upon request, at extra cost. Prices are exclusive of VAT. Inspection by appointment possible. Contact us — our team is happy to assist you! Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website. Gedpsxf T N Tjfx Ag Douk

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control unit: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20–6,300 rpm Gsdpfsv Rxa Sox Ag Dsuk Tool holder: SK 40 M & H 3D probe (for workpiece positioning) Vertical-horizontal milling attachment Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH): approx. 3,900 x 2,000 x 2,000 mm ä101225