Used Welding sets for sale (392)

Condition: excellent (used), Year of construction: 1993, I am selling Soyer BMS-800-90 spot welder, in very good condition. I will send a video for those interested. Dcjlinsu Sumze Swgog

Condition: new, welding current 10 - 180 A open-circuit voltage V connected load frequency 230 V weight 6,8 kg Dimensions (LxWxH) 403 x 153 x 264 mm Electrode welding machine with accessories: Electrode cable Djliovkixfjn Swgjcg Ground cable 4m Shoulder strap

Condition: used, Year of construction: 2000, volt 220 V Delinsu Sbxds Swgecg length . mm height . mm total power requirement . kW

Condition: used, Tig welding machine MESSER GRIESHEIM type Combitig GW 23 AC/DC Appliance only works with direct current welding and contact ignition Serial no. 445276 Year of manufacture approx. 1990 Power 230 Amp. = 35 % ED 180 Amp. = 60 % ED 140 Amp. = 100 % ED Adjustment range stepless Current type DC Mains connection 400 Volt, 50 Hz, 32 Amp. Plug - 2 cycle / 4 cycle welding unit - DC welding with contact ignition works - AC welding and high-frequency ignition does not work - 7 meter hose package with hand torch Dcjlin Swsdzqa Isgjg - Connector plug for remote potentiometer (foot switch) - without foot switch - Air-cooled - Gas pressure reducing valve Space requirement L x W x H 850 x 480 x 600 mm Weight approx. 90 kg

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A Dolish Nvfnjn Swgscg TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: good (used), Year of construction: 2006, From liquidation: Jäckle MIG 406 year of construction 12/2006 with new 4 meter hose package Wire feed case MS 15 with 5 meter intermediate hose package 4-roll wire feeder water cooling 2/4 stroke Welding range 50-400Ampere Weight approx. 250kg with one roll of VA wire 1.2mm, ground cable and pressure reducer Dcslin Swsvil R Uegog

Condition: excellent (used), I sell Rehm RP 362 MIG-MAG welding machine, in very good condition. Djleu Sumnoin Swgscg

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V Djliovkiwbon Swgecg at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable with clamp

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Dcslinsu Nvh Us Swgjg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled

Condition: used, TIG and electric inverter welding machine ESS type 170 ATG (AC-DC) Dcjlertvi Uoin Swgog TIG welding machine Serial no. Year of manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Electrode power 140 Amp. = 35%ED Mains connection 230 Volt, 50 Hz. - Direct current and alternating current welding - HF ignition - Infinitely variable power setting - 2-stroke and 4-stroke welding mode - Pulse welding mode - Operating mode stick electrode - 8 meter hose package with TIG torch - Shielding gas pressure reducer - Fan cooling - portable Space required for welding unit L x W x H 400 x 270 x 500 mm Weight 26 kg very good condition

Condition: used, Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos Dcolioqw D Eijn Swgog -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Dolin Ssud Rl Uewgecg

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Djlin Sordf Acjwgjcg Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: used, ESAB type LTG 250 electric welder Stick electrode welder Machine No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: stepless - Electrode holder with 6 meter connection cable - Direct current - fan-air cooling - possibly also TIG welding possible, without hose package Dslin Sed N E Rvowgjcg Mains connection 380 Volt, 50 Hz, 32 Amp. Plug space requirement L x W x H 1200 x 750 x 1050 mm weight 180 kg good condition Unit was originally designed also for TIG welding. The hose package for TIG welding is not present and the function has not been tested. The water cooling was for the hose package for TIG welding. The unit is therefore sold only as an electrode welder.

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece Dcslioqgi Idjn Swgsg -Dimension: 620/310/H235 mm -Weight: 15 kg/pc.

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Dcjlinsud R T So Swgsg

Condition: used, TIG welding machine DALEX type TGKW 55 Serial no. 532521 Year of manufacture approx. 1975 Power 225 Amp. = 60 % ED Djlin Swodzqacogocg 125 Amp. = 100 % ED Setting range 2.8 to 225 amps Type of current Direct current and alternating current (AC-DC) Mains connection 380Volt, 50 Hz - Power adjustment via 5 coarse stages and fine adjustment via rotary potentiometer, infinitely variable - 2-cycle and 4-cycle welding device - Remote control with rotary potentiometer for fine adjustment - Digital display for amperes - TIG hose package 4 meters - Welding gas pressure reducing valve - Water-cooled Space requirement L x W x H 1050 x 610 x 890 mm Weight 290 kg good condition

Condition: used, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A Dcelisuxg Idsn Swgsg -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

Condition: excellent (used), Rowatec MM 33 -Transformer welder -Transformer on thick copper -Power 330A-60% 250A-100% -Voltage range 15.8V-33V -Current protection 22A 400V -Step voltage adjustment( 10 fine positions, 2 coarse positions) Dcslinsuyg Imo Swgog -Smooth adjustment of wire feed -Wire feed 4 rollers -Welding mode : 2 bar , 2 bar spot, 2 bar time, 4 bar , 4 bar spot , 4 bar time - Infinitely adjustable break time and welding duration -Wire discharge time after welding

Condition: used, Gas-shielded welding machine EWM type MIG 230 No.: L/0340 Year of manufacture 1994 Power 230 Amp. = 35 % ED 120 Amp. = 100 % ED Adjustment range 8 levels Mains connection 400 Volt, 50 Hz, 16 Amp. Plug Dcelin Swsitv Nnegog - 2-stroke and 4-stroke welding unit - Spot welding device - 2-roller wire feeder - 3 meter hose package with central connection - Welding gas pressure reducer Space requirement L x W x H 1000 x 450 x 700 mm Weight 70 kg good condition

Condition: used, TIG and electric inverter welding machine ESS type Transtig 231 (DC) TIG welding machine Serial no. Year of manufacture 2007 Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Electrode power 180 Amp. = 50% ED Mains connection 400 Volt, 50 Hz. 16 Amp. plug - Direct current welder Dcjlin Sertvi Rswgjg - Infinitely variable power setting - 2 cycle and 4 cycle operation - HF ignition - Pulse welding mode - Operating mode stick electrode - water-cooled - 8 meter TIG hose package with hand torch - Shielding gas pressure reducer - Operating instructions Space requirement L x W x H 1000 x 450 x 710 mm Weight 90 kg Very good condition

Condition: used, Gas shielded welder CLOOS type GLC 357 N Make No. 576 Year of construction approx. 1985 Dcelin Sshubg Tjwgog rated power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED Adjustment range stepless Connection hose package 4.5 meters Mains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-cycle and 4-cycle welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4,5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - water cooled - pressure manometer for gas bottle - Welding unit equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 260 kg

Condition: used, Inverter welding machine for manual electric welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Dslin Sji E Iz Iowgocg Serial no.: TB1703500316 Item no.: 440030 Year of manufacture 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power E-hand 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. stepless Mains connection 230 Volt, 50 Hz - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Lift-Arc arc ignition - Stick electrode welding, can be used for all electrode types up to Ø 4 mm - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - equipped with 230 Volt Schuko plug - S mark for welding under increased electrical hazard - Overvoltage protection Dimensions (unit without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW

Condition: used, TIG welder NIMAK type GS 200 W Make No. 26642 Year of construction approx. 1983 Dslinodzqbvs Swgocg Power 200 Amp. = 60% ED 150 Amp. = 100% ED Adjustment range of power infinitely variable Mains connection 380 Volt, 50 Hz, 32 Amp. Plug - 5 meter TIG hose package - HF ignition - stepless current control and current increase - connection for electrode welding - only direct current - water cooled - shielding gas pressure reducer space requirement L x W x H 900 x 590 x 1000 mm weight approx. 200 kg good condition

Condition: used, Inert gas welder, welding machine CLOOS type GLC 206 No. 1150 Year of manufacture approx. 1984 Rated power 200 Amp. Output 250 Amp. - 60% ED Dcolinjhmwbpo Swgsg 200 amp. - 100% ED Setting range 18 steps Mains connection 380 Volt, 50 Hz, 32 Amp. plug - Wire feed adjustment - external wire feeder CLOOS type CK 21 with 2 roller drive - equipped with 1.2 mm welding wire - Hose package 3 meters with central connection - current display - voltage display - Air cooling with fan - Pressure manometer for gas cylinder Space requirement L x W x H 1200 x 460 x 960 mm Weight 160 kg