Used Welding sets for sale (389)

Condition: used, diameter / mm plate thickness / mm current capacity / kVA FRONIUS TransSteel 5000 Syn incl. wire feeder VR 5000 Remote 4R/G/FSC Condition: Very good (functional) Fslievx U D Nekm Rcsgb Included in delivery: - FRONIUS TransSteel 5000 Syn MIG/MAG welding machine - FRONIUS VR 5000 Remote 4R/G/FSC wire feed unit - Fronius FK 5000 cooling unit - FRONIUS MTW 500i/FSC/4.5m/45°/LED torch Last calibration on 22.01.2024 then no longer used. Next test date 23/03/2024

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. Fgjlikmeqay Uve Rcob The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2005, Condition: excellent (used), machine/vehicle number: 23500716, From authority stock: Pulse system little used Elmatech Hybrid 4002 Year of manufacture 2005 welding power 400Ampere at 60% ED 320Ampere at 100% ED Water cooling 4 roller wire feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter torch with regulator Fgslomb Uvljikm Rcsb wire rolls 1,0-1,2mm + rolls for aluminum wire dimensions in mm without case 1000x450x930 with operating manual, pressure reducer and ground cable

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V connected load frequency 230 V Fgjlikm Rjg U Tccocjb weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles

Condition: new, Year of construction: 2023, OREE 3in1 from stock europe the Oree OR-HWCC Folikmok Radio Rcegb is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A cleaning machine and a welding machine from 1,5 Kw together cust atlast 33 till 38.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1 - 1,5 - 2 and 3 Kw include wire feeder include in the price 1 till 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe and have in 3 locations in europe a sales and service organisation.

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Magic Wave 2200 Job G/F Fslikmolddxhs Rcogb Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip length: 15 – 80 mm. Strip width: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 40 h, Functionality: fully functional, sheet thickness aluminum (max.): 4 mm, laser power: 1,500 W, laser hours: 50 h, sheet thickness steel (max.): 4 mm, Used LightWELD XC demonstration system, including "Abidrive" wire feeder, for sale. Fgslev Dv Sfoikm Rcjb The system is factory-tested by IPG before sale and then has a six-month guarantee.

Year of construction: 1999, Condition: excellent (used), Welding machine make DALEX Type:VARIO MIC 400L year 1999 Fslikjfgvvajm Rcogb in very good condition, little used.

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled Folijvw Radjkm Rcegb -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Condition: new, Year of construction: 2025, 🔧 Key Features: Intuitive Control: The touchscreen allows for easy adjustment of the welder's settings. This enables users to quickly customize parameters to suit the task at hand, significantly enhancing efficiency. Automatic Wire Feeder: The welder is equipped with an automatic wire feeder, eliminating the need for manual feeding of material. This feature ensures precise wire delivery and minimizes the risk of errors. High-Quality Laser Source: The laser source from the renowned company Raycus provides high power and reliability, resulting in excellent weld quality and high productivity. Versatility of Three Functions: The WELDFOX 1500W combines three key functions: welding, cutting, and cleaning. This makes it ideal for various industrial applications, enabling multiple processes to be performed simultaneously. 💰 Benefits: Reduced Labor Costs: With the easy operation of the laser welder, you can lower costs associated with hiring highly skilled personnel. The intuitive design allows for quick training of staff. Increased Efficiency: The WELDFOX 1500W accelerates the welding, cutting, and cleaning processes, allowing for a higher volume of orders to be completed in less time. This leads to increased profits and improved business profitability. Training and Technical Support: With the purchase of the welder, we offer comprehensive training on operating the device. Our experts will help you understand safe laser operation practices and techniques to maximize the welder's capabilities. 🌟 Why Choose WELDFOX 1500W? 3-in-1 Versatility: The welder combines three functions: welding, cutting, and cleaning. This makes it an ideal tool for various industries, including construction, metallurgy, and manufacturing. High Speed and Precision: Thanks to modern technology, the WELDFOX 1500W ensures high welding, cutting, and cleaning speeds, significantly boosting efficiency. Precise parameter settings allow for excellent weld quality. Robust and Durable Construction: The welder is made from top-quality materials, ensuring its longevity and resistance to tough working conditions. You can be confident that the WELDFOX 1500W will meet the demands of even the most intensive projects. 📦 Purchase Contents: WELDFOX 1500W welder with automatic wire feeder. Touchscreen for easy parameter settings. Training on operation and safety with the device. Fgjlikmsnub Tpe Rcsb Full technical support and after-sales service.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,500 h, Functionality: fully functional, type of input current: three-phase, total height: 1,300 mm, total width: 725 mm, total length: 1,400 mm, input voltage: 380 V, ground cable length: 5,000 mm, overall weight: 250 kg, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 300 mm, type of cooling: air, laser power: 160 W, frequency: 20 Hz, workpiece weight (max.): 250 kg, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, Equipment: documentation/manual, type plate available, As a classic among stationary laser welding systems, devices in this series offer all the advantages of a compact four-axis system (X, Y, Z, C). The individually adjustable operating modes are manual, partially and fully automated, making the system suitable for a variety of specific applications. Fgelikmsv Ai A Io Rcob In addition to the standard equipment, there is a camera including a 4K screen and two additional rotary tables. Laser lamp recently replaced. . New price €45,000

Condition: used, TECHNICAL DETAILS - Quantity : 3 Fslikm Rsuhaa Nscogb - As per photo - Unit price : 2000 € HT

Condition: used, length 850 mm height 975 mm Fsliovuz Srjkm Rcegb total power requirement 10,5 kW weight of the machine ca. 175 kg dimensions of the machine ca. 850 x 450 x 1575 mm Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at rent 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm Fslijup Uzxokm Rcjgb - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: used, Year of construction: 2025, Functionality: fully functional, The machine is currently being used in-house for contract manufacturing. Fgolikm Rovz Tqgjcjb

Condition: excellent (used), CONTEC-COMPRESSORS * * * * * * CEBORA TS 3840 FROM SYNERGIC CONTROLLED WIRE FEED The MAXIMUM WELDING CURRENT 380A, COOLING, Tray 4-roller Fgolikmsd Hr Nle Rcob 2-step, 4-TAKT, COMPLETE THE WIRING. THE EQUIPMENT FULLY OPERATIONAL. CONTEC-COMPRESSORS * * * * * *

Year of construction: 2014, Condition: good (used), Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Fgjlikm Rol Smn Sjcjb Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, TECHNICAL DETAILS Quantity : 6 Fgelikmjuhaa Ao Rceb Price per unit : 2000 € HT

Condition: used, Year of construction: 1975, Stock number: 2480 Manufacturer: Rade Koncar Fjlikjrnrtrom Rcjgb Year of manufacture: 1975 Type: 2B-1 Device number: 75271 Welding current primary: 220 V 16 kVA 92 A 380 V 16 kVA 53 A Secondary welding current 220 V 100 A 380 V 200 A Equipment: mobile Dimensions: 500 x 700 x 600 mm weight: 120 kg

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure Fslikmsh H Ngto Rcogb The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: excellent (used), Year of construction: 2004, Complete indexing table Weiss with unloader Complete consisting of: -Weiss indexing table 12 positions -Control cabinet with servo drive ACOPOS 1640 with S7-400 CPU etc. -sorting lane for product removal for IEF Pick & Place Fgolijvlld Tokm Rceb -IEF Werner Pick & place unit complete standalone

Year of construction: 2009, Condition: excellent (used), Welding machine for steel, leg. Steel and aluminium Welding current: 25 - 210 A Supply voltage: 230V / 400V Duty cycle: 35 % ED at 210 A 60 % ED at 150 A Current adjustment: stepless Fuse protection: 16 A Dimensions L x W x H 870 x 480 x 800 mm Weight: approx. 75 kg Accessories / special features: - Mobile compact unit - Special thin sheet welding area - 4-roll wire feed - incl. hose package, pressure reducer and ground cable, ... - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Fgeliof Atlzjkm Rceb

Condition: good (used), Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V frequency: 50 (60) Hz cos phi: 0,95 The welding machine was technically overhauled. The welding machine is supplied with a hose package. (photos will follow) TIG DC range: Open circuit voltage: 80 V Working voltage: 10-22,8 V Welding current: 5-320 A Fgoljl Sm Hbjikm Rcob HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) primary continuous power: 9.5 kVA primary continuous current: 13,7 A primary maximum current: 19 A TIG AC range: open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) primary continuous power: 9.5 kVA primary continuous current: 13,7 A primary maximum current: 19 A Electrode welding mode: Stick electrodes: 1.5-6 mm open circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) primary continuous power: 13.1 kVA primary continuous current: 19 A primary maximum current: 22 A Welding method: Switch 10-stage: TIG DC Minus, TIG DC Plus, TIG DC Minus w. start pulse, TIG AC low noise, TIG AC rectangular TIG AC "Balanced TIG", Electrode Minus Electrode Plus Electrode "Sine Electrode square wave Selector switch 1: Switch 10-step: Current 1, Time 1, rise & fall time, start current, end current, ignition pulse, point time, gas pre- and gas post-flow time Selector switch 2: 9-step switch: Current 2, Time 2, (for pulse operation), AC balance, AC frequency, Hotstart time & current, current readjustment, electrodes d, display U Settings: 2 rotary encoders for selector switch 1 and 2 Indicators: 2 LED displays with advance indication and hold function for current, voltage, time, frequency Time functions: Switch 4-stage: OFF, pulsing slow, pulsing fast, points Ignition: switch 4-stage: OFF, high frequency, lift tig Energy control: switch 4-stage: on the system, hand or foot remote control, welding torch Operating mode: switch 4-stage: 2-stroke, 4-stroke, 4-stroke with 2 currents, gas test, test, program Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Gas pre-flow time: 0-3 s Gas afterflow time: 0-25 s Current rise time: 0-2 s Current decrease time: 0-20 s Ignition pulse: 0-100 ms Dot time: 0.1-2.5 s Pulsing slow: 10 ms-2.5 s Pulsing fast: 50 Hz-5 kHz Hotstart time: 0-1.5 s Hotstart current: 10-200 % Current readjustment: 100-250 Pushbutton: Test protection device button: program selection LED: Mains ON, overtemperature, fault, protection circuit, display hold, start current increase, current 1, current 2, decrease, final current Current source: IGBT inverter Ignition: High frequency or lift tig Standard: EN 60974-1 "S" / CE Burner connection: EURO central connection with 5-pin plug Cooling torch: Water circulation cooling device Socket 50 mm²: workpiece cable Socket 50 mm²: Electrode welding cable Mains connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 1976, Stock number: 2481 Manufacturer: Rade Koncar Year of manufacture: 1976 Type: 2B-1 Device number: 76416 Welding current primary: 440 V 53 A Secondary welding current 100% 158 A 60% 200 A Fgolornryujikm Rceb Equipment: mobile Dimensions: 500 x 700 x 600 mm weight: 120 kg

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W Fgolikm Rethit Ejcob - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.