Used water-jet cutting equipment and machines for sale (41)

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 3600 mm Measurements depth 5500 mm Measurements height 1600 mm Main Drive Number of axis 3 Movement X-Axis Movement 3050 mm Y-Axis Movement 2050 mm Z-Axis Movement 250 mm Table Table load 450 kg/m² Additional Equipment Cjdpfxoxuwz Ee Acyshd Table Protected with Plexiglas Panels and Lift Doors Equipped with Water Deflectors and Baffles in Tank This 3-axis Imes-Icore CUT matic WJ 3020 was manufactured in 2014. It features a universal waterjet gantry cutting system with a fully protected axis guidance system. The machine includes a stainless steel basin and table, motor-driven shuttle table, and highly dynamic linear drives in X and Y. The cutting area is enclosed with Plexiglas panels and lift doors. If you are looking to get high-quality waterjet cutting capabilities, consider the Imes-Icore CUT matic WJ 3020 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm Chsdpextqxbsfx Acyjd ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2017, Milestone S 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 45 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Chodpfx Aswd Ih Dscyed Water flow rate: max. 5,6 ltr. / min

Condition: new, The Opal Waterjet cutting system is the answer to particularly high demands for precision without thermal influence on demanding contours. Thanks to a wide range of equipment options and a powerful high-pressure pump, the cutting system is suitable for practically all available materials, such as steel, stone, wood, etc. up to a material thickness of 250 mm. The optionally available ProX 3D cutting head provides additional possibilities in 3D processing. Furthermore, we offer extensive additional equipment, such as desludging systems. Main features - Versatile application possibilities - Absence of slag formation during the cutting process minimizes the amount of finishing work Chsdpfx Asfz Di Aecyod - Optionally pure water cutting or with abrasive - Assembly of up to 4 cutting heads for parallel cuts - Pump capacity individually adapted to the respective application Technical data Drive Servo AC Available working widths 1.000 - 6.000 mm Available working lengths 1.000 - 12.000 mm Cutting height 2D 0.5 - 250 mm Cutting height ProX 3D 0.5 - 150 mm positioning speed 20,000 mm/min Safety module DIN-EN 13850 Electrical components DIN-EN 81346 Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: excellent (used), Year of construction: 2015, operating hours: 5 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, input voltage: 380 V, operating speed: 12,500 mm/s, table load: 1,450 kg, power: 29.42 kW (40.00 HP), Machine has not been used since the installation. Machine is in very good condition, looks like new. Maxiem 1530 with 1500 x 3000 mm cutting envelope.with around 5 operation hours:- 40 HP M40 pump A-jet (0-60 degree bevel cutting head) Abrasive feed hopper 600 lbs Water softener Air and water conditioning kit JetPhant garnet removal system Chjdpfx Acjxb E Efoysd Price contains dismantling of the machine and ready for loading. Machine can be tested at the facility if needed.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Excellent Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in superb condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: [Insert size, e.g. 1250mm x 2500mm if known] Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Chodpfxewb D S Ho Acysd Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: ready for operation (used), Year of construction: 2011, This OMAX 80X was manufactured in 2011. A robust waterjet cutting machine, it handles max. sheet sizes up to 6000x2000mm and is equipped with a P5060 pump. If you are looking to get high quality cutting capabilities consider the OMAX 80X machine we have for sale. Contact us for more information. Application Types Chjdexuaz Uepfx Acyed Cutting

Condition: excellent (used), Year of construction: 2021, operating hours: 2,348 h, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 200 mm, table length: 3,200 mm, table width: 2,180 mm, positioning speed: 10 m/min, table load: 6,000 kg, water pressure: 4,000 bar, pump pressure: 4,000 bar, For sale STM MasterCut V2 3020 2D waterjet in good condition. The machine is fully operational with no issues, is currently being used, and can be tested at our location. Technical Specifications: Working area (X/Y/Z): 3050 × 2050 × 200 mm Table size: 3200 × 2180 mm Machine weight (with water): 6500 kg Positioning speed: up to 15 m/min Positioning accuracy: ±0.05 mm Repeatability: ±0.03 mm Water consumption: 3.7 L/min Power supply: 400 V / 50 Hz / 16 A Inlet water pressure: 2–5 bar Operating temperature range: +10 to +40 °C Max. operating pressure (high-pressure components): 4000 bar Chsdpfx Ajxnpu Recysd Equipment & Features 2D cutting head Automatic collision detection sensor Automatic height sensor Laser head positioning system CNC-controlled abrasive feeding unit with 450 kg abrasive tank NUM control system with 20” monitor and waterproof keyboard/mouse IGEMS CAD/CAM software with NESTING option Water treatment system Reinforced cutting table (load capacity 1000 kg/m²) Automatic abrasive sludge removal system from the tank Safety light barrier Service tools kit High-pressure pump: BFT ECOTRON 40.37+

Condition: excellent (used), Year of construction: 2016, CMS Tecnocut Easyline Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 220 mm Options: - 3-Axis Cutting Head - Sanddoser - 22,5 kW High Pressure Pump Easypump Chedpfx Acod I D R Tsyjd

Condition: new, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits. Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations. Main features - Innovative, patented use of water jet and plasma technologies - Enables fully automatic cutting with both cutting methods - Up to 10 times the cutting speed of conventional water jet systems - Reduction of production costs of up to 70%. - Universal tool for cutting all types of material - Possibility of using the ProX 3D cutting head - Flexible use of the preferred cutting technologies during cutting for the respective component Codpfx Aef Ak Ugscyjhd - Optional cutting with pure water or abrasive General technical data Drives: Servo AC Available working widths: 1.000 - 6.000 mm Available working lengths: 1.000 - 12.000 mm Material thickness - Water jet 2D: 0.5 - 250 mm - Water jet 3D: 0.5 - 150 mm - Plasma: depending on plasma source Quality plasma sheaths: DIN-EN ISO 9013 positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Security module: DIN-EN 13850 El

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 322090801, New one. still in box Chedpfjwx Htzjx Acyod

Condition: used, Year of construction: 2007, operating hours: 3,498 h, functionality: fully functional, machine/vehicle number: A511910, travel distance Z-axis: 180 mm, table length: 1,750 mm, table width: 760 mm, FOR SALE BY TENDER Chjdpsxgu Aqefx Acyod

Condition: ready for operation (used), Year of construction: 2020, Main Drive Number of axis 5 Chjdpfjxqtg Njx Acyed Additional Equipment Smart Abrasive Reserve Tank Included Tank Capacity: 350 kg Tank Pressure: 6 bar Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2019, operating hours: 7,294 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 300 mm, Used Perndorfer WSS4020 waterjet system - Cutting format up to 4m x 2m - Z-axis stroke 300mm; depending on cutting head, cutting height from 180mm to 220mm - Cutting tank with sludge removal - Grate bed with zero-point stop - Control cabinet with integrated 5-axis CNC control CNC300ET - Abrasive cutting head +/- 60 degrees - 2D height sensing - Abrasive dosing with plexiglass buffer hopper - Abrasive container 200l - Light curtain Chjdpfexdvi Tox Acysd - Wje-CAM from ProCom on machine control - Big bag frame - Settling tank - Servo-Jet 4000 high-pressure pump - Laser pointer for positioning

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Cedpshqnl Tjfx Acyjhd Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, Year of construction: 2009, operating hours: 18,640 h, functionality: fully functional, machine/vehicle number: M15305015, table length: 3,000 mm, table width: 1,500 mm, For sale: MAXIEM 1530 Chsdpfx Acjxcm Svsyed Single owner from new Machine operational after service Operating hours: 18,640 h Regularly serviced, in continuous use (testing possible) Net price: PLN 139,000.00 Gross price: PLN 170,970.00 negotiable Price includes water treatment unit, machine dismantling, and loading We have a service technician who can install the machine and provide training (costs borne by the buyer)

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP Chodjuixdcjpfx Acyjd (Pictures are condition)

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Cutting sand: 6 t MACHINE DETAILS EQUIPMENT - Accessories Codsw T Rxpopfx Acyehd - Spare parts - Wear parts

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,500 h, Additional Equipment Extra pump for One Clean unit / Service tools for high-pressure pump / Spare high-pressure pipes for water transport This 3-axis STM WS3030 Wanne 4.2 was manufactured in 2019, featuring a robust 3002 × 3002 × 300 mm working area and a high max operating pressure of 4000 bar. It includes dual BFT high-pressure pumps with a backup function, ensuring reliability. The system supports a Num Flexium 8 control and IGEMS software. If you are looking to get high-quality cutting capabilities consider the STM WS3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting Chedpsxp Srhsfx Acysd

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Chsdpov Tmxujfx Acyod Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. Cjdpsd Ab Uuofx Acyjhd By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2019) – Complete and overhauled waterjet cutting machine Now you have the chance to acquire a MAXIEM 2040 model year 2019, in very good condition – freshly serviced, overhauled, repainted and ready for production. The machine is equipped with: A-Jet (5-axis cutting head) – for beveling, angle cutting and cone compensation Rapid Water Level Control – Raise and lower water level Codpfx Acewn El Uoyshd Premium software – includes lifetime free updates and unlimited licenses Pump: 40Hp Pump time: approx. 3500 hours This is a reliable, well-maintained machine with large capacity (cutting area approx. 4 x 2 meters), perfect for those looking for high precision, flexibility and production safety. Delivery and installation can be discussed if necessary. The machine is available for viewing – please contact us for more information or booking.

Condition: ready for operation (used), Year of construction: 2019, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Csdpfx Acjxlvanoyohd

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 4950 mm Measurements depth 3900 Measurements height 2500 mm Machine weight 2700 kg Main Drive Number of axis 3 Workpiece Workpiece X 3000 mm Workpiece Y 4000 mm Workpiece Z 300 mm Workpiece weight 800 kg/m² Additional Equipment Installation and Assembly Chjdoxfwxfjpfx Acyod Service Toolbox 3-day Training for up to 4 people Retrofit between 2020-2023 This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 2300 mm Measurements depth 4000 mm Measurements height 1800 mm Chjdpfx Ajxfmncscyed Machine weight 2000 kg This Waterjet Italy WL510 was manufactured in 2022. It's a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information. Application Types Cutting