Water jet cutting system

Knuth Hydrojet Vario 2040

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Digital machining center for marble Denver Dsdpfx Aeu Ucn Aob Tsla Quota 3350 7-year-old Italian 4-axis machining center Denver Quota 3350 with all tools, suction cups and angle gear, brand new (never used), valued at 15,000 euros. Machine dimensions 5.18 x 3.20m height 2.61m Work table dimensions 3.25 x 1.56m New control computer (1 year old) Delivery at the charge of

Condition: excellent (used), Year of construction: 2017, Milestone S 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Dedpfewd Ih Dox Ab Tsla included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 45 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 5,6 ltr. / min

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Dledpfx Abofupado Tsa Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm Dedpfjvvl Ugjx Ab Tsla • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working range: 4,150 mm, travel distance X-axis: 4,150 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 2,500 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 250 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,300 mm, tank capacity: 8,000 l, pressure: 4.1 bar, table height: 900 mm, operating pressure: 4,000 bar, warranty duration: 6 months, table load: 2,500 kg, overall weight: 8,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), D2 MONSTER M5 high end waterjet cutting machine, completely reconditioned 2025, all vital components replced and condition even better then new. This machine had very little working hours ( showroom useage ) but is currently being completely overhauled to ensure full warranty. The machine will be supplied as new with newest options and developments, including full warranty of 6 months. X-axis range 4150 mm Y-axis range 3200 mm Z-axis range 250 mm C-axis range +/- 275 degrees A-axis range +/- 70 degrees Table size 4500x2500 mm, cutting area in 3D: 4000x2300 mm Dedpevdnpiefx Ab Tola Tilting arms for loading and unloading slabs up to 2500 kg. Pump BFT Ecotron 40.37 37 KW 3,8 L/min New pump, working hours 0 . Software depending the application ( Metal or Stone ), to be discussed This machine is built for high precision work and foreseen with all possible options from cameras to anti collision feeler, electronic abrasive doseage with vacuum control, etc etc. Machine readyness to be agreed. This machine has a new value over 300.000 euro Water purification for pump water available on request as well as abrasive removal system.

Condition: new, Year of construction: 2025, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp * 230V wired power supply (for the combustion version). Other models available: Dljdpsibqr Tefx Ab Toa XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Control type: Siemens - Travel X: 6500mm - Travel Y: 3300mm Djdpfxjwnidhs Ab Tsla - Resonator type: 7XSE-60 - Power: 37.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2014, operating hours: 2,800 h, condition: good (used), machine/vehicle number: 4198, Rotating-head bridge saw for natural stone, ceramics, and engineered stone Support travel X-axis: 3600 mm Support travel Y-axis: 4630 mm Z-axis height adjustment: 400 mm Saw blade max.: 725 mm Max. cutting depth: 255 mm Spindle motor speed: 800–6000 rpm Equipment: Vacuum separator Automatic material measurement Automatic tool measurement Camera Tilting table 3500 x 2000 mm Table extension 3500 x 430 mm Control cabinet air conditioning Automatic central grease lubrication Rubber table cover Laser Adapter for finger milling cutters GMM software: - GMM CAD - GMM Mini CAD Dodpew N Hdgsfx Ab Tsla - GMM Parametric Figures - GMM Profile Saw Automation - GMM Teach-In with point laser - GMM Contour Milling

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), Grundfos TPE 80-250/2 S-A-F-A-BQQE-MD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: Djdpfxotp A Sts Ab Tjla Q: 90 m3/h H: 21,7 m P: 7,5 kW n: 2910 1/min Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Dledpfx Absvpuvgj Tsa Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.