Used water-jet cutting equipment and machines for sale (45)

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training - Service, training and maintenance work Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. Lhedporwxu Ijfx Aiioh We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Our team will be happy to help you.

Condition: excellent (used), Year of construction: 1999, operating hours: 34,675 h, power: 36.77 kW (49.99 HP), Here we offer you a KMT SLIV 50 hp pump for hire. You can test this pump or bridge a breakdown of your pump for only 450 € per week. plus shipping and installation Lsdpferx Stqex Aiishh For purchase in current condition we offer you the pump for 12.500 € with overhaul / refurbish between 25.000 € and 35.000 € We are happy to advise you. Oil/air cooling available We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2008, operating hours: 23,412 h, functionality: fully functional, KMT SV 100 HP S high pressure pump Ljdsnab Erepfx Aiijhh Sold in overhauled condition. new pressure intensifier, new control and new HP pump Oil/air cooling available ( Pictures are condition )

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Lhodpsi Hckrefx Aiish Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,853 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details. • Cutting technology: Abrasive waterjet cutting Lodpfx Asyu S Uzjiishh • Working area: 3000 x 2000 mm • Pump power: 75 kW • Maximum pressure: 60,000 / 65,000 psi • Delivery volume: 0.91 gpm (3.4 lpm) • Voltage/Frequency/Phase: 480 V / 60 Hz / 1 Ph • Full load amps: 1.0 A • Enclosure type: 4 • Electrical diagram: 013659-DWG • Operating hours (control): approx. 4,853 h • Pump hours (service report): approx. 7,715 h • Machine hours (service report): approx. 32,811 h • Included components (integral to machine): High-pressure system, Intensifier pump, Cutting head, Cutting tank, Operating computer / Control unit • Due to a detected play in the axes, the machine can not currently move to a reference point • Software and Flowcut must be replaced Additional equipment • Abrasive system

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Lhjdpfxjhqnl To Aiioh Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Lhodped Ab Uusfx Aiish Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Lhodpsx D Rxpsfx Aiieh Application Types Cutting

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display Lhsdpfx Aijya Ecisioh • No special foundation required • Ergonomic full table access • Made in the USA

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag Lhedpex Sz A Rjfx Aiish • Flow abrasive feeding system

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support Lhsdpsvvl Ugsfx Aiioh - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Year of construction: 2018, operating hours: 1,000 h, condition: excellent (used), Work table: 4x2 m, table with grill Cutting head in 5 axes (with jet taper compensation) Hydro-abrasive cutting Anti-collision device Height detection device Laser projection device for defining the origin (zero point) Electronic system for control and detection of the abrasive Pressurized gas supply system (270 kg) Remote control for managing up to 6 axes OSAI Open-M numerical control Pump (pressure intensifier) 30HP CAD-CAM TC2020 and 3D TC2020 software license The car delivered complies with CE Norms The machine was used for 1000 hours, then it was transported and is being dismantled It has all the components and they are all functional Ljdpomzbqmsfx Aiiohh

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration Lodpfx Aisv Tmxujiehh 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: refurbished (used), Year of construction: 2011, operating hours: 10 h, functionality: fully functional, travel distance X-axis: 6,096 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 200 mm, table length: 8,559 mm, table width: 3,861 mm, warranty duration: 12 months, feed length Z-axis: 200 mm, water pressure: 4,500 bar, cutting length (max.): 6,096 mm, cutting width (max.): 2,032 mm, OMAX Waterjet 80X-1 Features: - Omax PC-Based CNC Control - 50 HP Enduromax 5060V Pump - Closed-Loop Water Recycling System - Terrain Follower (Collision Sensing Follower) - Abrasive Removal System - Dosing System Machine Dimensions: Water tank dimensions: 8000 x 3300 mm 2x Sand cart dimensions: 1500 x 1000 mm Pump dimensions: 1700 x 1300 mm Hopper dimensions: 900 x 900 mm Height ranges between 1000 mm and 1500 mm Fully Refurbished High-Pressure System – Professional Technical Overhaul The machine offered for sale has undergone a comprehensive technical refurbishment, including a complete overhaul of the high-pressure pump and all critical high-pressure system components. All works were performed by a professional service team, focusing on restoring full performance, reliability, and long-term operational stability. 💦 High-Pressure Pump – Complete Overhaul The high-pressure pump has been: - Fully disassembled - All worn and critical components replaced or refurbished - Sealing elements, valves, and pressure-critical parts completely renewed - Operating parameters recalibrated to factory specifications As a result, the pump now provides stable operating pressure, quiet performance, and extended service life. ⚙️ High-Pressure Components All high-pressure system components operating in conjunction with the pump have been: - Thoroughly inspected - Replaced or overhauled where necessary - Pressure-tested to ensure safe, efficient, and reliable operation The machine is fully prepared for continuous industrial operation. ✅ Overall Condition Thanks to the extensive refurbishment, this machine is: Lhsdpfeyaiitsx Aiioh - Technically fully renewed - Equipped with a completely refurbished high-pressure system - Ready for immediate operation It is an ideal solution for customers seeking a high-performance waterjet machine without the expense of new equipment, while maintaining professional reliability and precision. Ready for Shipping

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Rapid Water Level Control – adjustable water level (raise/lower) Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Pump hours: 0 Lhodpfx Ajwn El Ujiijh The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Delivery and installation can be discussed if required.

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 8100332, repeat accuracy: 0.076 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 25 mm, workpiece weight (max.): 245 kg, type of input current: AC, input voltage: 230 V, pressure: 2,000 bar, Do you need a precise and versatile cutting machine that doesn't take up an entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial quality with a compact format - perfect for workshops, schools, product development, prototyping and small series production. With water and abrasive, you can cut almost any material - from aluminum, stainless steel and titanium to carbon fiber, plastic, glass and stone. All with high precision, without heat effects or deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar 🔹 Power: 230 V, 1-phase (standard socket!) 🔹 Ready to run - plug & play Lhedpewl Ipksfx Aiieh ProtoMAX comes complete with IntelliMAX software, where you can draw, import and cut directly from the same interface. Easy to use, powerful enough for advanced jobs. Do you want to show that your workshop is serious - even on a small area? Then OMAX ProtoMAX is an obvious choice.

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. good working condition Lhjdpjnp Iywofx Aiijh

Condition: new, The Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology with the precision of waterjet cutting. The synergistic use of the capabilities offered by both technologies allows you to fully exploit all the benefits. Thanks to its universal applications and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small businesses. Key features: • Innovative, patented use of waterjet and plasma technologies • Enables fully automatic cutting with both cutting processes Lhedef Ak Ugepfx Aiijh • Up to 10 times faster cutting speed compared to conventional waterjet systems • Reduction in production costs of up to 70% • Universal tool for cutting all types of materials • Option to use the ProX 3D cutting head • Flexible use of the preferred cutting technology during the cutting process for the respective component • Optional cutting with pure water or with abrasive General technical data: Drives: Servo AC Available working widths: 1,000 - 6,000 mm Available working lengths: 1,000 - 12,000 mm Material thickness: - Waterjet 2D: 0.5 - 250 mm - Waterjet 3D: 0.5 - 150 mm - Plasma: depending on the plasma source Plasma cutting quality: DIN-EN ISO 9013 Positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Electrical components: DIN-EN 81346 Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Ljdpfxew T Rxps Aiiohh Cutting sand: 6 t MACHINE DETAILS EQUIPMENT - Accessories - Spare parts - Wear parts

Condition: used, power: 45 kW (61.18 HP), WATER JET MACHINE INTENSIFIER PUMP JET CUT 45 KW WORKING ORDER. large capacity pump that is capable of running single or multi head machines. Lodpsx U Ax Sjfx Aiiehh spares package as shown