Elect./Voltage: 460 V, 60 Cy, 3 Ph.
VECOPLAN VVZ 250T HURRICANE LARGE WASTE SHREDDER -- Dual shaft shredder -- (2) 300 HP motors -- Infeed opening 67" x 98" -- Rotor dimension 2" x 28" -- Number of cutters 2 x 31( to be confirm) -- Rotor speed RPM 0-90 rpm -- Includes; Control panel, Cooler, Owner's manual and Spare parts -- NOT INCLUDING; Conveyor and Structural stand -- Weight 28.5 tons -- Dimensions; 496" x 218" x 150" more
• Briquette Diameter 60 mm.
• Motor 5,5 Kw.
• Output 15/70 Kg/h according to material
• Hopper dia 1000mm.
• 7 cycles/min.
• 3 x cylinders.
• Briquette’s length max 60 mm.
• Electronic manometer for pomp pressure.
• Power panel with PLC Touch Screen
Year - 2005 CE Compliant
Condition - Very Good more
UNTHA RS 30 Quad Shaft Shredder ...4-Shaft Shredder in a rugged compact design. Unlike Dual Shaft Shredders, "Quad Shaft" Shredders allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing [...]: -- Dual Drive Motors - (2) 15 KW (20 HP). -- Header width of 450 mm x 230 mm dia., cutting chamber opening of 450 x 700 mm; (46) cutter blades with 19 mm blade width with (1) hook. -- Main shafts speed of... more
Typ PCS 6000
Year of construction 2003
Hours of operation 10,210 h
Dimensions separation bed inside 6,000 x 1,765 mm (L x W)
Dimensions separating bed outside without motor 6,750 x 2,435 mm (l x w)
Drive power 4 kW
Transport speed 25 - 67 rpm.
Frequency control 25 to 67 Hz
Tilt angle 67 °
Number of axles 12 pieces
Number of plastic discs per axis 17 to 18 pieces
1 piece feeding conveyor to the TCS 6000
1 piece discharge conveyor for the paper
1 piece conve... more
Make/model: MOCO AZ 09F + MOCO eg 01
Condition: like new power: 7.5 kW + 0.55 kW
Cutting work placement: 20 piece knife, 19 mm wide, 1-Zack,.
State knife: new, 0 hours, original MOCO
Cutting device: 433 x 500 mm
Optional: 2 wear plates
Filler ZB 01: 1200 x 500 mm
Optional ZB01: maintenance door with Sicherhheitsschalter
Optional cabinet: ZB01 forced reversion
Optional control panel: control 3 conveyor belt drives
New price of the plant, net (2007): 33.080,00 EUR
Year ... more
Manufacturer Avermann Maschinenfabrik GmbH & Co. KG
Type AVOS 1810 S-90/80
Year of construction 2005
Press power 80 t (800 kN)
Feed channel 1.800 x 1.000 mm
Bale size 1.100 x 750 mm (w x h),length variable
Tying system 4-fold vertical, automated
Drive power 2 x 45 kW
Machine dimensions 11.200 x 2.400 x 3.900 mm (l x w x h)
This machine (similar photo is shown) is provided with following additional equipment:
Special press ram
Oil heating... more
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
VECOPLAN RG62/200 FF FILM AND FIBER SHREDDER -- 200 HP motor ( was replaced 3 years ago) -- 15" Rotor with (88) cutters ( includes NIP cutters) -- Hydraulic ram -- Opening 62" x 80" -- Variable speed drive -- Loaded on your truck more
This is a plant for recycling acid lead batteries based of a hydrometallurgical process (plant for other treatment of hazardous waste in accordance with 8.11 b) aa) Column 2 of the 4th BImSchV). The aim of the plant was the production of lead oxide.
Compared to the conventional thermal recycling process, this pilot plant based on a hydrometallurgical process has a considerably lower energy requirement and causes almost no air emissions.
Short description of the procedure:
Starter batteries cont... more
Make/model: Weima TH 700
Condition: good driving power: 7,5 kW
Briquette diameter: 70 mm
Chip container: 1, 4mx1, 4mx0, 9 m
Year of manufacture: 12/2009
Operating hours: 6490 h
Weight: approx. 1,2 t
including special features: reinforced agitator motor
incl. special versions: separately installable unit
incl. Optional: extended wiring harness (12 m)
including special equipment: suction flange on the Superchargers
including special equipment: oil cooler with a separate motor ... more
Pos. 30 Ballistic separator
Type BS 2150-06-04-131
Year of manufacture 2007
Use as PPK separator
Throughput capacity up to 12 tons/h
Equipped with 6 pcs. oscillating paddle 6,200 mm long
Drive power 5,5 kW
Dimensions ballistic separator 6,160 x 2,450 x 1,550 mm (l x w x h)
Weight approx. 3 tons
Dimensions steel construction 9,300 x 6,600 x 4,200 mm (l x w x h)
Pos. 50 Fine grain belt underneath the ballistic separator
Type sliding belt conv... more
Presto SHD 1800 + Kiggen DWLK Waste Press Paper Press Press 300 kN;
Presto SHD 1800 + Kiggen DWLK Waste Compactor
Ideal conditions for high throughputs are provided by the large filling opening and cycle times adjusted by increasing the output.
The optimal pressing force ensures high compression of the material.
The prescreen is mounted four times with polyamides and ensures safe and low-maintenance operation.
The problem-free emptying is ensured by a conical design of the press container... more
Universalgranulator by THM
Extremely robust, developed for metal grinding
Type: ZM 1020 hands
Drive 90 kW
Rotor 480 mm
Rotor length: 1000 mm
Intake opening approx. 980 x 550 mm
Dimensions (L/W/H) CA. 2850 x 3750 x 4725 mm
Total weight approx. 16 t,.
House -, commercial -, industrial - and bulky waste
Waste electrical and electronic equipment (electric motors up to 1.5 kg, transformers up to 3 kg)
A crushed car & truck tires
Aluminium turnings, milling chips
Castings and... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.