Thermoforming machine

Kiefel Natureformer KFT 90 Speed

Condition: like new (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, overall weight: 17,000 kg, fuel type: diesel, tank capacity: 4,000 l, color: blue, power: 704 kW (957.17 HP), output current: 1,270 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 704 kW (957.17 HP), nominal power (apparent): 880 kVA, total length: 14,500 mm, total width: 4,500 mm, total height: 3,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, Brand: Elbe Type: MT-825 CA Year of manufacture: 2007 Serial number: 10330 Operating hours (read): < 500 Power (kVA): 880 Power (kW): 704 Engine brand: MTU Engine type: 16V2000 Engine power (kW): 720 Djdpfxoyt Dqlj Al Aowc Fuel: Diesel Alternator brand: Leroy Somer Alternator type: LSA49.1L9 C6 S/4 Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperage (A): 1270 Dimensions LxWxH (mm): On request Weight (kg) approx.: 17000 Quantity in stock: 1 Country of origin: Germany Remarks: Complete set ex Standby, available for inspection in our yard Sales conditions: As is/where is, functional take-out

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. Dwedeyx Uy Aopfx Al Asc • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: new, Year of construction: 2026, The VPR-4000 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-4000 press is also swiveling and mobile. Possible applications: Veneering / Form gluing / Encasing... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Dedpfx Aoyr R Hwsl Aewc Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work surface: 4000x1500mm Pump power: 0.75 kW Vacuum pump capacity: 40 m3/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: In stock at warehouse 54634 Bitburg - free loading -

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Oil hermetical distribution transformer, producer - ELIN, made in Czech republic, 630kVA, 10/0,42kV, Dyn1, ONAN, uk=4%, year of production 2006, functional, rutine test report, design documentation, available 2 pcs. Djdsx Nxtuopfx Al Aowc

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Dwsdpetk It Sofx Al Asc Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) Dwsdpfx Ashknbrol Aec - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Dwedpfx Aljmzbkro Asc Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Dsdpfxow Rpzqs Al Aswc Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: new, Year of construction: 2026, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Dwodpfxjq Sp Eke Al Aec Washing lines Systems for cable waste Used machines

Condition: new, sheet length: 3200sheet thickness: 13,0total power requirements: 18weight approx.: 9,2messurements (LxWxH): 4000x1900x2350Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. CNC slotted table shears KKI Thanks to durable and durable mechanics and hydraulics, precise backgauge with Ball screw and user-friendly CNC control are KKI guillotine shears highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and Cutting lengths of 3 to 6 m in length are part of our standard portfolio. Of course are on customer request also higher sheet thicknesses and cutting lengths possible. The guillotine shears owe their long life to their particularly robust construction with fully welded frame. The entire machine body, the cutting beam and the Dwjdsfl S Efspfx Al Aoc Backgauge are insensitive twisting and deformation and thus enable highest cut quality. By entering the sheet thickness and material type, the CNC control calculates Fully automatically the required cutting angle and kerf. Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. Technological advantages     Fast and precise cuts     Stable, durable frame construction     Automatic kerf adjustment and angle adjustment     Easy handling     Low maintenance costs     High safety standard     Use of components from well-known manufacturers     Low unit costs Technical specifications: Sheet thickness: 10 mm Cutting length: 3,280 mm Cutting angle: 0.3 - 1.8 ° Backgauge: 1,000 mm via CNC Motor power: 11 kW Length: 3,800 mm Width: 2,050 / 2960 mm Height: 2,150 mm Weight: 8,650 kg • Stage execution • CNC Control - backgauge - Cutting angle - kerf - Cutting length • Ball screws for the back gauge • balls in the table • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm • Cut line lighting • Foldable up to 1,000 mm finger protection Incl. pneumatic sheet holding We have many references!