Used sawing and cutting for sale (155)

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Redpfxjvbcl Hs Adaon

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. Rjdpsrtn Nzefx Adajn A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Condition: good (used), Swedish multi-saw ARIVISLANDA DS74+1 - 160kW; Dismantled in March 2024 from a working line ; 4 hydraulic servo floating saws; Technical condition as in the photos. Redpfx Ajtrxgbodajn

Condition: good (used), Double saw for cutting side boards behind the canter. Good condition. Circular saw motors 2x 45kW; Saw spacing by hydraulic servos. Feed rate 60m/min. Rjdpfx Ajtrxlkodaen

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Redsw Dp Ufjpfx Adasn Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Year of construction: 2014, condition: reconditioned (used), Parameter Unit Value Technical data Number of cutting systems kpl. 1 Horizontal clearance mm up to 600 - according to order Vertical clearance mm max. 360 Main motor kW 7,5 Feed motor kW 0,55 Lifting motor of cutting system kW 0,55 Feed adjustment m/min continuously adjustable Conveyor belt pcs. 1 Length of band saw mm 4010 Width of band saw blade mm 32 - 50 - according to order Thickness of band saw blade mm 0,9 -1,25 Module mm 22,2 Length of working table mm 3000 - standard Width of the working table mm 230 Height of the machine m 2,50 Redpfxjttic Se Adasn Machine width m 2,25 Machine length m 3.0 Weight kg 700 net price vat invoice machine after major renovation

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener Rodoxawddepfx Adasn - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Condition: excellent (used), functionality: fully functional, I sell a complete square of raw material imported from Germany and available for pickup in Osla near Boleslawiec. Manufacturer: Holtec + Falcone Germany, Range of processed diameters: from 14 to 65 cm Range of processed lengths: from 2.0 mb to 15 mb In the price of the sorting plant a very large stock of spare parts, i.e. chains, reducers, motors, cables. The raw material yard consists of: - Long timber feeder - 2 x Feeder for short timber, - Kesla brand crane at the feeding table for leveling the raw material on the table, - Complete operator station (cameras, monitors, computer), - Sorting plant system operating software, - Scanner of the amount of sorted raw material, - Falcone 550 debarking machine from 2014, - Dripping saw, diameter 1600 mm, - Metal detector, diameter max 650 mm Rsdpfjvcqi Aex Adajn - Single boxes: 44 pcs. - Bark removal system from under the debarking machine - Removal system for waste generated during dripping. - Automation control , full optimization based on the set parameters . - Line capacity: up to . 300 000 m3 per year in two shifts

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling with swords with control with length measuring with frame with hydraulics immediately available Rsdpfx Aoip T Dledaen Location: Austria, near Vienna

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures) Redpfx Asihpn Njdasn

Condition: used, Bögli KHV-700 Marathon gang saw Rjdpfx Ashvmn Asdaon with riving knife ran without problems until removal Location: Upper Austria

Condition: like new (used), Log circular saw, for diameter until 1100mm Rsdpfx Aji Ek Hpedajn

Condition: used, EWD EW1000 solid band saw carriage for log band saw Rodpfxsqwnzie Adaen Hydraulic log band saw carriage 5 clamping blocks Double V-turner Rind turner hydraulic system Control boxes Distance to saw blade max. 1000mm Claw opening 900mm Distance between the clamping blocks: 1000mm - 1450mm - 2050mm - 3000mm Distance between the outer clamping blocks 7500mm Track width 1300mm Total length 9000mm Total width 2450mm total height 1750mm immediately available already dismantled and ready for loading without saw, without saw stand

Condition: excellent (used), functionality: fully functional, Möhringer splitting wedge with large opening and pressure roller. Can also be adjusted across the center. Rodpov Tbxpjfx Adasn

Year of construction: 1992, condition: used, well maintained pre-cut circular saw only 7 years in operation With 2 x 6,7 KW flat motors / saw motors Hydraulic linear adjustment up and down. Redpfx Adjcwry Asaen Width adjustment via ball screw.

Condition: good (used), Year of construction: 1994, cutting height (max.): 250 mm, saw blade diameter: 400 mm, cutting width (max.): 500 mm, chain width: 540 mm, working height: 250 mm, power: 0.09 kW (0.12 HP), DOUBLE SHAFT CIRCULAR SAW COSTA MOD. LEONE 2/250 2X90 MKW HIGH MM 250 Rodpeq E U Ixsfx Adasn

Condition: new, Year of construction: 2025, Sawmill Viking VBS1400 Log bandsaw with double cut bandsaw blades. Cuts back and forth!!! Roller diameter: 1000mm Bandsaw blades: double-sided = 150mm wide, single-sided = 140mm wide Blade speed: infinitely variable, 0 - 45m/s Feed speed: 0-60m/min. Log diameter: up to 1400mm (max. 1600mm) Cutting length: 6m (up to 12m extension possible, not included) Saw head: 3500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser and video monitoring Rodpfx Adjwwam Ejaen 30 kW saw motor Frequency converter 30kW - infinitely adjustable to regulate the saw blade speed for different types of wood Blok manipulation: Hydraulic Condition: New

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Rjdpfx Adsv Ummbjajn Frame roller conveyor 4-strand puller Viewing by appointment.

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor Rsdeiwaxnjpfx Adajn or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Year of construction: 2006, condition: used, - cutting height (mm): 200 Rjdpfx Adjm E Uf Asasn - Cutting width (mm:) 200

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Redpfsh Eyqvex Adasn Photos show original condition.

Condition: excellent (used), cutting width (max.): 700 mm, cutting height (max.): 120 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min Rsdpfxov Raqxj Adaen 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings Rodpfxew I Sg Do Adaon • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: good (used), Esterer SS45 full gang saw was technically completely overhauled Only visually the gate is no longer beautiful Passage 45 cm 340 upm 500 stroke Rjdpfx Aofvb Etjdaen with complete hanging, saw blades and Templates with hydraulic roller lifting with splitting wedge with drive power 30 kW with hydraulic power pack with complete switch cabinet Please also visit my other advertisements. I look forward to your inquiry.

Year of construction: 2022, condition: new, New carbide circular saw blades to Costa 505 x 4.0/2.6 x 120 mm 4 side holes pitch circle 155 mm Rsdpfsk Ruhhsx Adaon 8 side holes pitch circle 235 mm approx. 30 pieces for sale