Steam Generator System

2021 CERTUSS Universal 600 TC Complete Steam Generator System

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) Ksdpfeyidvdjx Ah Eodt - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: good (used), Large throughput cooling spiral. 28 tiers, 880mm belt. Approx 550m belt. Was used as spiral freezer to freeze over 3 tonnes per hour of fried McD chicken burgers. Ksdpfx Ahjx Hbhco Eedt

Condition: ready for operation (used), Year of construction: 2014, Offered is a column-mounted jib crane: Load capacity: 1000kg, Outreach: 3500mm, Overall height: 4400mm, Column diameter: 355mm, Crane classification: H2 / B3, Hoist unit: electric chain hoist, Slewing gear: electric 0.21rpm / 0.84rpm, System regularly inspected, Inspection by appointment Kdjdpey Dgqwjfx Ah Est

Condition: used, ALFA LAVAL Separator Type: MRPX 318 HGV-74C / 88-1005-01-00 Manufacturing No.: 2969862 Worm Wheel Shaft: 1420–1500 rpm Tachometer: 1420–1500 rpm Revolution Counter: 110–125 rpm Alfa Laval MRPX 318 HGV-74C self-cleaning hermetic separator, complete stainless steel unit in good condition (dismantled). Manufacturing No.: 2969862 Product No.: 88-1005-01-00 Technical Details: Kdjdpfx Aexqm Rneh Eet - Bowl diameter: approx. 318 mm - Speed: approx. 8,000 rpm - Motor: approx. 22 kW - Capacity: approx. 15,000 – 25,000 L/h (depending on product) - Worm wheel shaft: 1420–1500 rpm - Tachometer: 1420–1500 rpm - Revolution counter: 110–125 rpm - Self-discharging (HGV type) Ideal for milk, whey, juice, or other liquid-solid separation in the dairy or food industry. Clean, complete machine ready for operation or integration into a production line. Location: Denmark Condition: Used / tested Price: Upon request Inspection: Possible by prior arrangement

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Ksdpfjtpkv Ajx Ah Eedt -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: used, functionality: limited functionality, fuel type: diesel, color: light blue, maximum load weight: 85,000 kg, first registration: 01/2023, Year of construction: 2013, operating hours: 6,655 h, Equipment: adjustable boom, all wheel drive, cabin, crane, For sale: a 2013 Manotti ARM850 self-propelled crane with 6655 operating hours. Lifting capacity: 85 tons. Currently, the crane has a leak in the area around the restrictor in the boom lifting cylinder. Kdedezh Hadjpfx Ah Eot

Year of construction: 2021, condition: good (used), functionality: fully functional, 676.13 kWp industrial photovoltaic solar plant (2021) The installation was completed in 2021 with an original peak power of 676.13 kWp. It consists of monocrystalline PERC photovoltaic modules installed on ballasted aluminum structures, without roof perforation, and with an approximate inclination of 10°. Energy conversion is performed using 5 Huawei SUN2000-100KTL-M1 three-phase inverters, with a combined nominal power of approximately 500 kW AC and an output voltage of 400 V three-phase. The inverters incorporate MPPT trackers, string monitoring, PLC/Modbus communications, and integrated protection in direct and alternating current. The plant has an ITRON meter responsible for zero-injection control, configured for administrative reasons to prevent excess power from being injected into the grid. It also includes electrical panels, protection devices, conduits, solar cabling, and measurement and control systems. Main features • Installation year: 2021 • Original peak power: 676.13 kWp • Power of disconnected strings: 110.14 kWp Kdodpfsznbq Djx Ah Est • Current peak power: 565.99 kWp • Inverters: 5 Huawei SUN2000-100KTL-M1 • Combined nominal power of inverters: approx. 500 kW AC • Output voltage: 400 V three-phase • Module technology: monocrystalline PERC • Ballasted aluminum structure on the roof • Zero-injection meter: ITRON • Monitoring, measurement, and protection system • Location: El Prat de Llobregat, Barcelona, Spain • Available for inspection and dismantling study

Condition: new, We are the official Sunward dealer for Berlin, Brandenburg, East Saxony, and the Wittenberg district. Visit us and be impressed by our extensive selection and superior quality. We consistently stock around 20 excavators. Sunward SWE 90 UF 2PB – Fully equipped, new machine - Air conditioning - Operating weight: 9.6 t Kdedpfx Ahozt Id Uj Eet - Yanmar engine, 46.2 kW, displacement: 2,615 l - Adjustable boom - Load-holding valve (protective and safety valve on boom and dipper arm + overload warning device) - 2 additional auxiliary circuits - Aux 1 and 2 on joystick - Air-suspended comfort seat - LED headlights - Upper and front protective guards for cab - Refueling pump - Central lubrication - Additional counterweight (+400 kg) - 5-year remaining warranty HS08 hydraulic quick coupler with lifting hook - 400 mm trenching bucket - 800 mm trenching bucket with teeth - 1.60 m hydraulic ditch cleaning bucket All details provided without obligation. Don't miss this unique opportunity to purchase a true professional machine at an unbeatable price. Sunward is among the world's 20 largest excavator manufacturers. Inspection possible at any time by prior telephone appointment. We accept your used machine as trade-in.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3029098, total width: 1,100 mm, total length: 2,500 mm, total height: 2,000 mm, Equipment: type plate available, Manufacturer: PIM Ltd. Country: Bulgaria Machine type: Cheese formation machine Capacity: 600 kg/h Year: 2019 Serial number: 3029.098 Material: Stainless steel Application: Dairy processing / cheese production Applications Kedpfx Ahsyxkpge Esdt Suitable for: White cheese production Feta type cheese Dairy processing plants Cheese forming and molding

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KT 615-7, pressure: 15 bar, power: 1,700 kW (2,311.35 HP), temperature: 325 °C, rotational speed (min.): 7,673 rpm, Steam turbine M+M Turbinen-Technik – 1.7 MW Industrial top quality For sale: Complete, high-quality industrial steam turbine installation from the renowned German brand M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documents, manuals, diagrams, etc., are complete and available. Key specifications: Type: KT 615-7 Power: 1700 kW (1.7 MW) Year of construction: 2009 Speed: 7673 rpm Inlet pressure: 15 bar (abs) Outlet pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built according to German quality standards and guarantees high efficiency and a long service life. The installation is complete with control and measuring systems, valves, and piping, and was used in an industrial environment. The turbine is currently dismantled/disassembled in preparation (as shown in the photos), which simplifies transport and reinstallation. Ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Reliable and proven technology Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Kedpfx Ahszbkgie Ejdt Applications: Combined heat and power (CHP) Industrial power supply Waste heat recovery Process industry 📩 Interested or would you like more information? Please feel free to contact us for technical details, a viewing, or a customized quote.