Used Multi spindle machines for sale (212)

Condition: new, Number of spindle: 6 Max bar diameter: 20 mm Max supply length: 100 mm Spindle speed: max 6.000 rpm Multispindle cam machine for small bar capacity with high rigidity, high accuracy and very fast. Colqywokvl Ero Rtsgt This rigid and highly accurate machine is very fast. This machine is used for medium and mass component productions from bar material or rough part not finish with special bar loading. Machine is equiped with thruth coupling, 6 longitudinal slides, 6 cross slides wtih station 1 ; 2 ; 4 ; 5 with long turning. AC speed and feed adjustable, machines can be equiped with automatic bar loader.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, number of spindles: 6, spindle speed (max.): 6,300 rpm, bar passage: 32 mm, TECHNICAL DETAILS Control system: SIEMENS SINUMERIK 840D PowerLine Work spindles: 6 pieces C-axis: Alignment and switching device Spindle clearance: 32 mm Spindle power: 6 x 4 kW Spindle speed: max. 6300 rpm Power at 100% ed: 6 x 4 kW Torque: max. 6 x 15 Nm Rapid traverse speed X-axis: 12 m/min Rapid traverse speed Z-axis: 12 m/min Travel distance - X: 68/100 mm Traverse path - Z: 68/100 mm MACHINE DETAILS Connected load: 107 kVA Machine length: 7000 mm Machine width: 1800 mm Machine height: 2400 mm EQUIPMENT - 5 cross slides for processing in X and Z - Pick-up spindle freely programmable in position 6 - 5 front spindles of which 5 can be driven - 4 U-axes electrically prepared - 1 axis for back machining on the pick-up spindle - Kraft and Bauer CO₂ fire extinguishing system - Hinged belt chip conveyor - Artis tool breakage control Cgjlqoufx Tcjyw Rtst Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for rear end machining: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2004 Serial number 020440MA02 Bar length 3000 mm Knoll high-pressure system AE1114: Year of construction 2004 Filter system Pumps 5 bar and 40 bar individually adjustable, for the processing steps Heat plate exchanger Lifting pump from the chip conveyor

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens 840 Dsl Cgelqyw Rjt Du Tdjtet TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Condition: used, Year of construction: 1996, Functionality: fully functional, TECHNICAL DETAILS Control type: CNC Number of spindles: 6 Cgjlqywjtqm Ins Rtet Spindle passage: 18 mm Turning length: 63/50 mm MACHINE DETAILS Machine weight: approx. 4.5 t Spindle drive motor: 11 kW

Condition: used, Year of construction: 1996, Functionality: fully functional, TECHNICAL DETAILS Control type: CNC Number of spindles: 6 Spindle passage: 18 mm Turning length: 63/50 mm MACHINE DETAILS Machine weight: approx. 4.5 t Celqywetmppne Rtegt Spindle drive motor: 11 kW

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Celqywen Uum Hs Rtsgt Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: refurbished (used), Série n° 30 389 Machine reconstruite avec : - Moteur des avances et vitesses broches AC - PLC Siemens Simatic HMI - Armoire électrique neuve siemens - Porte barre et son support Celqsir Imcjyw Rtogt - 6 tubes d'avance - 6 tubes de serrage - Appareillages en option - Machine au normes C

Year of construction: 2018, operating hours: 7,879 h, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 Cgolsmduh Ejqyw Rtet number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: refurbished (used), Year of construction: 2014, Functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm Cslsr Nc Ufjqyw Rtogt X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Year of construction: 1987, Condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Cgoljin Ub Toqyw Rtjt Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Year of construction: 2013, Condition: excellent (used), - Number of spindles: 8 - Bar diameter: 22 mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - Slide units 1.1: NC-controlled X and Z axes - Slide units 1.2: NC-controlled X and Z axes - Slide units 2.1: NC-controlled X and Z axes - Slide units 2.2: NC-controlled X and Z axes - Slide units 3.1: NC-controlled X and Z axes - Slide units 3.2: NC-controlled X and Z axes - Slide units 4.1: NC-controlled X and Z axes - Slide units 4.2: NC-controlled X and Z axes - Slide units 5.1: NC-controlled X and Z axes - Slide units 5.2: NC-controlled X and Z axes - Slide units 6.1: NC-controlled X and Z axes - Slide units 6.2: NC-controlled X and Z axes - Slide units 7.1: NC-controlled X and Z axes - Slide units 7.2: NC-controlled X and Z axes - Slide units 8.1: NC-controlled X and Z axes - Slide units 8.2: NC-controlled X and Z axes Equipped with : - 1 CN INDEX C200SL - 1 Double NCU Cgelqywon Hqlzo Rtot - 1 Pick up - 1 Smoke extractor - 1 HP 100 bar pump - 1 Chip conveyor - 1 IEMCA SIR bar feeder

Condition: excellent (used), Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up - Back burring slide - 5 front spindles - 4 long turning slides pos.1, 2, 4, 5 - Part catcher - End of bar catcher Coloix I Dgeqyw Rtogt - Swarf conveyor - Part belt conveyor