Used planing & moulding machines for sale (502)

Condition: excellent (used), Year of construction: 2004, Weinig Profimat 26 Fortec Year of manufacture: 2004 Planing width: 230 mm (can be equipped with heads up to 245 mm) Planing height: 130 mm Infeed table length: 2,500 mm Spindle diameter: 40 mm Feed motor: 3 kW Automatic positioning of spindles 3 and 4 Bsdsywidtjpfx Ab Iowk Spindle arrangement: Bottom 7.5 kW Right Left 11 kW Top 11 kW Bottom 7.5 kW

Condition: good (used), Year of construction: 2011, Weinig Unimat 500 Year of manufacture: 2011 Working width: 230 mm Working height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in table: 2 powered units, 150 mm wide Feed speed: 5 - 30 m/min Feed motor: 5 kW Memory function 3 radial CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bsdpfoywiabex Ab Iswk Bottom: 11 kW

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 5-SPINDLE MOULDER WEINIG MOD. UNIMAT 500- USED - Composition: 1st lower horizontal spindle 2nd right vert. 3rd left vert. 4th upper horizontal spindle 5th lower horizontal spindle Bwsdpfx Ajywflyjb Iek - Complete with MEMORY SYSTEM - Width 230 mm - PTO drive - Short workpiece device - Ribbed table - Year 2002 - CE standards

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: Bwodpfx Ajr Axwnob Iek 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Model Powermat 400 LE - machine with ribbed table Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom 5.5 kW - left and right – 7.5 kW each - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Bwsdpewybrnsfx Ab Iok Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Four-side planer WEINIG UNIMAT SUPER 4 Year of manufacture: 2003 TECHNICAL DATA: - min / max width of workpiece: 45 / 150 mm - min / max height of workpiece: 15 / 50 mm Bwsdpfx Absyivilo Iek 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 18.5 kW 3) lower horizontal 5.5 kW spindle diameter: 40 mm

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, functionality: fully functional, SCM SUPERSET XL Four-Sided Planer Year of manufacture: 2007 The machine has only operated for 50 hours, it is practically like new. Technical specifications: • Working width up to 240 mm • Working height up to 120 mm • Spindle speed: 6000 rpm • Stepless feed adjustment: 5–25 m/min • Spindle configuration (5 spindles): - bottom 7.5 kW - right 7.5 kW - left 7.5 kW Bodpfsyhhx Nex Ab Iswk - top 7.5 kW - bottom 7.5 kW • All tool spindles have independent motors The machine is equipped with 2 vertical spindles (2 and 3) with HSK85S quick couplings.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, working width: 180 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 180 mm, overall weight: 1,550 kg, power of feed motor: 4 W, spindle speed (min.): 6,000 rpm, jointer table length: 2,000 mm, 4-SIDE MOULDING MACHINE with 5 spindles Max working width : 180 mm Max. working heigth : 120 mm Spindles diameter 40 mm Spindles rotation : 6000 r.p.m. Bjdpfxsv Em S Se Ab Iowk 4 spiral HM tools included Adjustable feed speed from 5 to 27 mts(min. V° spindle universal 5,5,HP ( 4 kW) Machine weight : 1550 kg Overall dimensions : 3780 x 1550 x 1400 mm Machine in very good conditions

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Bwedpfx Abot Hk Ate Ijk

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Bwjdpfxsiz Tzxs Ab Iek Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3532.724, planing height: 100 mm, planing width: 225 mm, WACO HM200 UNIVERSAL, Planer-Moulder with 7 spindles Year of manufacture: 12/1979 S/N 3532.724 Moulding machine with hydraulic feed and powerful spindle. Bsdpfsyvzx Tex Ab Ijwk Feed speed: 0-100 m/min Counter bearing on all horizontal spindles. Infeed table: 200 cm Technical specifications: Working area: 225x100 mm (width x height) Bottom spindle max. tool diameter: 160 mm, working length: 210 mm Side spindles (right/left) max. tool diameter: 200 mm, working length: 110 mm Top spindles max. tool diameter: 225 mm, working length: 210 mm Spindle diameter: 45 mm Weight: 10 t

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds Bwsdpfx Ajytf Nvsb Isk - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), The main photo is for illustrative purposes. The remaining photos show the actual condition of our planer. More photos can be provided upon request. Bwjdpfx Ajyvqa Hob Iek Four-Sided Planer GUILLIET-O Working width: 220mm Working height: 120mm 5 heads Head configuration: bottom/right/left/top/universal Motor power: 5kW/9kW/7.5kW/5.5kW Stepless feed speed adjustment Electric height adjustment (up/down) Manual planing width adjustment Power supply: 380V 1055 operating hours. The machine is fully operational and has been in our company's possession for several years. It is well worth its attention and price. VAT Invoice Transport available.

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm Bodpfoxwytijx Ab Iewk DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: ready for operation (used), functionality: fully functional, Gabbiani GS120 four-sided planer/moulder with material feeder Working width: 120 mm Working height: 80 mm Number of spindles: 7 Spindle arrangement: Bottom Bwsdpsyr Nu Hofx Ab Iok Left Right Top Bottom Top Sanding unit Caterpillar feed Sacot material feeder The machine is suitable for dry wood, wet wood, as well as for short workpieces

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 11kW Left 11kW Top 11kW outboard bearing Right 11kW Left 11kW Top 11kW outboard bearing Bottom 11 kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. Bedpfxoxcft Ss Ab Iewk Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) Bedpjxqh E Hofx Ab Ijwk 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Weinig Hydromat 23C four-side planer moulder Manufacturer: Weinig Model: Hydromat 23C Year of manufacture: 2003 Spindle configuration: 5 spindles Configuration: bottom, right, left, top, bottom Machine description: For sale: Weinig Hydromat 23C four-side planer moulder, year 2003, equipped with 5 spindles in bottom, right, left, top, bottom configuration. This is a solid and proven industrial machine designed for four-side planing of solid wood, production of moulded parts, timber sections, strips, joinery components and furniture elements. The Hydromat 23C is known for its stable construction, good machining precision and suitability for continuous industrial production. Typical specifications for this series include working width up to 230 mm and working height up to 160 mm. Market listings for Hydromat 23C also show versions with mechanical or hydraulic feed and variable feed speed. Technical data: - Machine type: four-side planer / moulder Bwjdsyu Uqrjpfx Ab Ijk - Number of spindles: 5 - Spindle arrangement: bottom, right, left, top, bottom - Working width: up to approx. 230 mm - Working height: up to approx. 160 mm - Series configuration range: from 5 to 10 spindles - Standard feed speed: approx. 6–36 m/min Features and advantages: - Solid industrial construction - Proven Weinig technology - Good machining quality - Suitable for continuous production - Good solution for serial timber processing - Universal 5-spindle arrangement for planing and profiling Condition: Used machine Note: Technical details may vary depending on the exact machine configuration, motor powers, spindle diameters, feed system and optional equipment.

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) Bwedpoq Au Tlsfx Ab Iek 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: used, Four-sided planer SCM SUPERSET NT, max. width 240 mm, max. height 120 mm, Bjdpfx Abeyu Thvo Iowk feed with frequency inverter 5–25 m/min, 5 spindles, spindle diameter 40 mm, infeed table length 2500 mm, year of manufacture 2024.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Bwjdjyu Ii Iopfx Ab Isk Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim Bsdewwwkhepfx Ab Iewk

Condition: ready for operation (used), Year of construction: 2020, operating hours: 80 h, overall weight: 1,000 kg, Wood Planer manufactured in 2020. This FORMAT4 EXACT 63 features a planing width of 630 mm and a table length of 1050 mm. It offers a thickness range of 3 – 300 mm with a maximum chip removal of 10 mm. If you are looking to get high-quality planing capabilities, consider the FORMAT4 EXACT 63 machine we have for sale. Contact us for further details. • Planing width: 630 mm • Table length: 1050 mm • Thickness range: 3–300 mm • Maximum chip removal: 10 mm • Cutterblock: 4-knife system, diameter 120 mm, speed 4600 rpm, self-setting planer knives • Feed speed: stepless 5–20 m/min; feed unit with variable speed • Main motor: 10.0 kW • Electrical: 3 x 400 V, 50 Hz, duty type S6, star-delta start • Thickness height adjustment: electric with digital display • Position control: Digi Drive D1 with LED display for set/actual value; programmable positioning functions • Infeed roller: steel, spiral toothed, 630 mm • Outfeed roller: steel, 630 mm • Pressure bars: segmented at infeed; spring-loaded at outfeed Bodpfx Aboylkhzj Iswk • Side guiding strips on thickness table • Swiveling extraction hood • Machine weight: approx. 1000 kg • Control: conventional (non-CNC) Additional equipment • Table extension with workpiece roller, 630 x 570 mm

Condition: ready for operation (used), Year of construction: 2020, working width: 520 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, working length: 2,310 mm, This SCM Abricht/ Dickenhobelmaschine was manufactured in 2020. It features a working width of 520 mm and an adjustable thicknessing height from 3 mm to 250 mm. The machine includes a "TERSA" cutter block system with 4 disposable knives and offers four feed speeds. Consider the opportunity to buy this SCM Abricht/ Dickenhobelmaschine wood planer. Contact us for further details. • Working width: 520 mm • Thicknessing height: 3–250 mm (adjustable) • Surface table length: 2,310 mm • Feed speeds: 5 / 8 / 12 / 18 m/min • Cutter block: TERSA system, 4 disposable knives, 120 mm diameter • Control unit: READY electronic control • Programmability: up to 99 programs • Axis control: motorized vertical adjustment of thicknessing table with digital position display • Power-assisted changeover: pneumatic/hydraulic automatic lifting of surfacing tables • Supply voltage: 400 V, 3-phase, 50 Hz • Main motor: 9 kW (12 HP) with automatic star-delta start • Braking: automatic electronic motor brake • Suction: 120 mm extraction outlets for surfacing and thicknessing Bwedsyiucqopfx Ab Iok

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min Bwjdpfsykbcajx Ab Isk • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw