Used Bi-Axial Mixers for sale (41,591)

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Gsdpfx Agsx H Rtnebstt Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: good (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: VEB ILKA, axial fan axial fan -Type: S4D350-AF10-17 -Motor: 25 W 1380 rpm Gtodpfxjuqq N Io Agbet -Voltage: 220/380 V -Dimensions: Ø 380 x 140 mm -Weight: 4.0 kg

Condition: good (used), mileage: 453,000 km, power: 265 kW (360.30 HP), first registration: 08/2004, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 8,550 mm, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2004, Equipment: cruise control, differential lock, electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - Leaf spring suspension Gtedpox Tpmmsfx Agbjt - Brake booster - Differential lock - Speed limiter - Refrigerator - Air horn - Radio/cassette player - Disc brakes - Sun visor - Toolbox - Central lubrication system = Further information = General information Usable material: Concrete Technical information Number of cylinders: 6 gross vehicle weight (GVW): 35,000 kg Axle configuration Suspension: Leaf spring suspension Front axle 1: Steerable; Tire tread left: 40%; Tire tread right: 40% Front axle 2: Steerable; Tire tread left: 40%; Tire tread right: 40% Rear axle 1: Twin tires; Differential lock; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: hub reduction axles Rear axle 2: Twin tires; Differential lock; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: hub reduction axles Functional Water installation: Yes Condition Technical condition: good Visual condition: good Further information Contact Andre, Henri or Andre for more information.

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Gtedpfx Ajx R E Nfjgbjt Application Types Edge Banding

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Gtodpfxexx U Tgs Agbet Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) Gsdjnzt A Hopfx Agbstt - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Gtodpfou Au U Tjx Agbst Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW Gtsdpfxjt A U H Ie Agbet

Condition: as good as new (ex-display), Pneumatically controlled edge banding machine with 7 units: Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA quick-change knife system Konstantin and controlled edge air blast nozzle behind the 2nd jointing cutter head. End trimming saw unit with extraction device, including two pneumatically swiveling saw blades, adjustable and programmable from the control panel. Radius milling unit with pneumatic 2-position revolver, adjustable and programmable from the control panel. Includes 2 quick-change motors with R=1mm radius cutters and 2 quick-change motors with R=2mm radius cutters. Corner rounding unit (copy milling unit) with insert table function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The entire unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1mm and radius 2mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Includes extraction system with chip collection box for scraper shavings. Flat scraper unit with four-way usable scraper knives. The entire unit can be pneumatically engaged/disengaged. Removed glue residues are extracted. Buffing unit with two ORIGINAL Riepe cloth-sisal-lamella wheels, arranged at an angle, for cleaning and polishing. General features: - Infeed fence with handwheel adjustment (jointing thickness adjustment) and digital readout - Upper pressure beam with digital workpiece thickness display and handwheel adjustment Godpfxow Rd Ixo Agbstt - Pressure zone with digital display and handwheel adjustment - High-gloss package: roller tracing for radius milling unit, radius scraper unit, and flat scraper unit - Large panoramic noise and safety enclosure for all units and the glue tank - Interior lighting - Operator panel with 15'' touchscreen and intuitive operation - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tank with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and tall workpieces (especially for PUR adhesive) - Additional quick-change glue tank - Pressure zone with 3 pressure rollers, with the first roller motor-driven - Heavy-duty roller edge shear for edges up to 54 x 3mm - Original RIEPE spray system - Before the jointing cutter unit: LPZ II separating agent - Before the saw unit: LP 289/99 cooling and antistatic agent - Before the milling unit: NFLY lubricant - Before the buffing unit: LP 193/63 cleaning agent Technical data: Edge thickness: 0.4 - 3 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction ports: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit Godpfx Ajw Rcmyjgbett - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: excellent (used), machine/vehicle number: VF633AVB000100986, mileage: 112,765 km, power: 199 kW (270.56 HP), first registration: 10/2002, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2002, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics Godpfx Agex Uqnnjbott = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: used, mileage: 355,000 km, first registration: 11/2015, Year of construction: 2015, MAN TGM 15.250 BL Bi-/Multitemp Deep-Freezer Truck Lamberet Multitemp - Box Body and Tail Lift • Emission standard: EURO 6 • Cruise control • Leaf/air suspension • Automatic transmission • Reinforced engine brake • Lane departure warning system • Brake assist • Hill-start assist • Differential lock • ABS • ASR / switchable • Airbag • Multifunction steering wheel • Automatic climate control • Central locking • Electric windows • Fog lights • Headlight range adjustment • MAN sound system • Rear view camera • Tire size: 285/70 R 19.5 • Tire tread depth: 8/8, 13/13, 9/13 mm • Gross vehicle weight: 15,000 kg • Unladen weight: 8,800 kg • Payload: 6,200 kg! • Overall vehicle dimensions: 9,500 x 2,600 x 3,550 mm (LxWxH) POLARUS - Deep-freeze box body, year of manufacture: 2015 • 2 temperature zones with longitudinal partition, 1/3 to 2/3 split • Internal dimensions zone 1: 7,300 x 1,700 x 2,350 mm (LxWxH) • Internal dimensions zone 2: 7,300 x 800 x 2,350 mm (LxWxH), with sliding partition! • 3-wing soft partition door at the rear • 18 roll cage/pallet spaces • Aluminum guard rails 2x right and left, bottom and top • Double load securing rails right and left • Floor: plastic • Side door on the right MBB C 2000 S tail lift, upright • 2,000 kg lifting capacity • Platform length: 2.40 m THERMOKING SPECTRUM T 1200 R WHISPER GREEN TECH multi-temperature refrigeration unit (year: 2015): • Diesel / Electric (380 V) • Remote control in cab • Temperature recorder Godpfxjx Nc H So Agbstt • 2 evaporators - German vehicle - One owner from new! - TÜV / general inspection: new upon request and at additional cost! Errors and interim sale excepted! = Additional information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: good (used), machine/vehicle number: XLRAD85MC7E758373, mileage: 484,251 km, power: 265 kW (360.30 HP), first registration: 05/2007, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, total length: 8,100 mm, total width: 2,500 mm, total height: 2,800 mm, Year of construction: 2007, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag Gtsdpfxexvbnlo Agbst - Armrest - Day Cabin - Disc brakes - Front suspension: Leaf - Hub Reduction - Open roof - Rear suspension: Leaf - Sper - Thick Axles = More information = Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: good Visual appearance: good

Condition: like new (used), Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Gtedpfx Aoxruinjgbjt Power: 9kW Voltage: 3 x 400V/ 50Hz

Condition: used, Year of construction: 2013, machine/vehicle number: 8411, Drivetrain Gtjdpfotr Idqox Agbot Type of fuel: LPG Weights Empty weight: 2.000 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.700 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 750 m Transport dimensions (LxWxH): 4.3x1.28x2.08 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), mileage: 123,668 km, power: 184 kW (250.17 HP), first registration: 02/2022, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 5,760 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,050 mm, total width: 2,600 mm, total height: 3,900 mm, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Tail lift - Power take-off (PTO) Number of axles: 2, Configuration: 4x2, Payload: 7,832 kg, Curb weight: 10,168 kg, Gross weight: 18,000 kg, Total fuel capacity: 220 liters, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Warning lights, Engine power: 184 kW (247 hp), Fuel: Diesel, Emission class: Euro 6, Transmission type: AS-Tronic, Gearbox manufacturer: ZF, Gears: 12, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, Central locking, Seats: 2, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: T-1200R whisper, Refrigeration unit: Diesel/electric, Unit operating hours / electric: 25, Unit operating hours / diesel: 2,352, ATP status: 0, Body insulation, Heating, Wall thickness: 40 mm, Cooling type: Refrigeration and freezing, Day/night cooling: Daytime cooling, Additional evaporator, Tail lift, Tail lift version: Rear gate, Tail lift capacity: 2,500 kg, Tail lift manufacturer: Dhollandia DHLM.30, Tail lift material: Steel, Tail lift size: 200 x 255, Battery for folding ramp Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Tire size: 295/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 7 mm; Tire tread right: 7 mm; Suspension: Leaf suspension Axle 2: Twin tires; Tire tread inner left: 14 mm; Tire tread outer left: 14 mm; Tire tread inner right: 14 mm; Tire tread outer right: 14 mm; Suspension: Air suspension Weights Curb weight: 10,168 kg Payload: 7,832 kg Gross vehicle weight: 18,000 kg Functional Tail lift: Dhollandia DHLM.30, rear gate, 2,500 kg Loading platform height: 123 cm Refrigeration unit: Diesel and electric (2,352 diesel operating hours; 25 electric) Wall thickness: 40 mm Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Financial information Lease price: €1,606 per month (default, 72 months); Please ask for further information and conditions Identification License plate: 78-BSP-3 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality Gtsdox Dibiepfx Agbst • Fair price • Honest trading • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of ‘recognizable quality’ • And more…. Please visit our website for special offers and the full stock list:

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2466708, load capacity: 280 kg, overall weight: 14,650 kg, transport length: 7,300 mm, transport width: 2,490 mm, transport height: 2,700 mm, fuel type: electric, color: green, Equipment: UVV, all wheel drive, Technical data: Working height: 28m Platform height: 26m Load capacity: 280kg Climbing ability: 40% Total weight: 14,650kg Gtjdpfjuadr Tex Agbet UVV, general signs of use, fully functional

Condition: refurbished (used), Diosna W 240 A wendel mixer with 2 bowls 240kg dough 2 speed enforced motor first speed 18kw, second speed 24kw Godpfx Agox Ttt Robott digital control panel scraper shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 150kg bowl contents 370 liter

Condition: used, mileage: 398,811 km, power: 200 kW (271.92 HP), first registration: 12/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 41 m³, loading space length: 7,580 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, ANTOS 1827 L refrigerated box, 7.5 m, with BÄR 1.5 ton tail lift. Godpfowikqrjx Agbett * Body: KIESLING BI-ZONE = 2 temperature zones + right-hand side door * THERMOKING UT-1200 (diesel engine) and 380 V electric auxiliary cooling * Vehicle no. For customer inquiries: 4298 * Euro VI engine version, with OBD-C * Active Brake Assist * Rear axle differential lock * Air conditioning * Lane keeping assist * Green environmental sticker * Tail lift * Standard trailer hitch, D40, Rockinger * High Performance Engine Brake * Rear axle air suspension * Air deflector, without base panel, lockable * Rain/light sensor * Full service history * Stability Control Assist (ESP) * Driver airbag * Trailer brake, dual-line, brake connections on the left * Antos * Electronic braking system with ABS and ASR * Driver suspension seat, comfort * Comfort locking system * Mercedes PowerShift 3 * Particulate filter * Locking system, with central locking * Transparent exterior sun visor * Digital tachograph, EC, engine speed, ADR * Cruise control * Two-seater * Low storage tray, on the engine tunnel * AdBlue tank 60 l, left * Trailer socket 12 V, 13-pin, frame-mounted, LED * Trailer socket 24 V, 15-pin * Roof hatch/roof ventilation flap * Transmission G 140-8/9.30-0.79 * Weight variant 18.0 t (7.5/11.5) * Heating, electronic compressed air supply unit * Engine OM936, R6, 7.7 l, 200 kW (272 hp), 1100 Nm * Wheelbase 5200 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 315/70 R 22.5 front axle/front axle/rear axle * ClassicSpace S cab, 2.30 m, tunnel 320 mm * Stabilizer, front axle * Digital tachograph EC, rpm, without ADR * Tank 290 l, left, 650 x 565 x 950 mm, aluminum * Front spring 7.5 t, single-leaf * Toll collection preparation * Attention assist No liability for printing or typographical errors Sale to businesses only Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty under sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Warranty insurance available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested separately. * Toll Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * --- Visit us on our website at * Over 200 vehicles always in stock.

Condition: used, Year of construction: 2012, machine/vehicle number: Z452512A-43368, Drive: Wheel Godpstr Nm Asfx Agbett Empty weight: 7.583 kg Mast: articulated arm Lifting capacity: 227 kg Working height: 1.600 cm Max. horizontal reach: 765 m Transport dimensions (LxWxH): 6.83x1.79x1.99 Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2001, machine/vehicle number: 2465878, empty load weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,540 mm, color: blue, Equipment: UVV, Technical Data Year of construction: 2001 Drive: Bi-Energy Gjdpfjt Akgkjx Agbstt Working height: 20 m Platform height: 18.39 m Platform dimensions (LxW): 0.76 x 1.83 m Working outreach: 13.54 m Weight: 10150 kg Climbing ability: max. 30% UVV: new Turning range 180°, electric 48V DC, batteries 8x6V, diesel engine functional, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 2465208, empty load weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,540 mm, color: blue, Equipment: UVV, Technical Data Year of construction: 2002 Drive: Bi-Energy Working height: 20 m Platform height: 18.39 m Platform dimensions (LxW): 0.76 x 1.83 m Working outreach: 13.54 m Weight: 10150 kg Climbing ability: max. 30% UVV: new Turning range 180°, electric 48V DC, batteries 8x6V, diesel engine functional, general signs of use Gtsdpfx Aget Akgqjbjt

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 2465868, empty load weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,540 mm, color: blue, Equipment: UVV, Technical Data Year of construction: 2004 Drive: Bi-Energy Working height: 20 m Platform height: 18.39 m Platform dimensions (LxW): 0.76 x 1.83 m Working outreach: 13.54 m Weight: 10150 kg Climbing ability: max. 30% UVV: new Gjdet Akx Hspfx Agbstt Turning range 180°, electric 48V DC, batteries 8x6V, diesel engine functional, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 2465838, empty load weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,540 mm, color: orange, Equipment: UVV, Technical Data Year of construction: 2002 Drive: Bi-Energy Working height: 20 m Platform height: 18.39 m Platform dimensions (LxW): 0.76 x 1.83 m Working outreach: 13.54 m Weight: 10150 kg Climbing ability: max. 30% UVV: new Turning range 180°, electric 48V DC, batteries 8x6V, diesel engine functional, general signs of use Godpfxot Akxyo Agbstt

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: 2467248, empty load weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,540 mm, color: blue, Equipment: UVV, Technical Data Year of construction: 2004 Drive: Bi-Energy Working height: 20 m Platform height: 18.39 m Platform dimensions (LxW): 0.76 x 1.83 m Working outreach: 13.54 m Weight: 10150 kg Climbing ability: max. 30% UVV: new Gjdpfx Aet Akydegbett Turning range 180°, electric 48V DC, batteries 8x6V, diesel engine functional, general signs of use