Mixer

Ystral conti tds 3

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Dodpfjfzrgyex Aiiscp

Condition: used, Used Urschel model 1700 stainless steel Comitrol Processor. Recommended for size reduction applications of free-flowing dry and semi-dry products. Processor is designed to install three different reduction heads - slicing head, cutting head or microcut head (ONLY microcut head is inlcuded). Microcut rotor head is driven by 22 kW, 2938 rpm, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg. Dcodpfxeltlulj Aiijp

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available - Dedpfepgkmwex Aiijcp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM Dodsrivv Eepfx Aiiscp

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm Dcjdpjimdlrsfx Aiiep - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Dcodpfjr Nclaox Aiisp Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. Djdpfxerivxcs Aiiocp The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Dcsdpeq H H Ruefx Aiisp Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: ready for operation (used), A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January. Djdjxwyvwepfx Aiiecp

Condition: used, Year of construction: 1995, Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass. Additional title: with aroma recovery Input quantity apple juice: 6600 kg/h Water evaporation: 4840 kg/h Discharge quantity concentrated juice: 1760 kg/h Dodpowu N T Aofx Aiijcp Steam consumption: 1685 kg/h Length: 7,70 m Width: 6,70 m