Used measuring systems for sale (276)

Condition: like new (used), GBS Test Pulse Rev. 3 Pulse Generator for Long-Term Insulation Tests The test pulse design is designed for long-term insulation tests on test objects with capacitances up to 6 nF. Converter for High-Voltage Test Transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation of the sine wave from 16-24 kHz via full bridge. · Converter voltage adjustable from 0-600 V, Imax=2.6 A, maximum power 1.3 kW · Pulse current limit 110 A (cut-off threshold) Pulse Transformer Control · Control via full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limit 100 A (cut-off threshold) Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductors (150 μH, 300 μH) to adjust the pulse width and rise time to the load capacitance and voltage. · Pulse repetition frequency (0.1 – 2.5 kHz), adjustable. · Polarity: Adjustable positive, negative, or alternating depending on the polarity of the sine signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-way cascade circuit. · Total transformation ratio selectable as 1:7.7, 1:10, or 1:15 via taps. Maximum output voltage 15 kV with possible load capacitances of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · 1:1000 parallel voltage divider. · Overvoltage limitation at approx. 20-23 kV through parallel spark gaps. · Thermistor for overtemperature detection in the first transformer stage. Hsdpfsu Egz Rjx Ahveni · Ground-side current measurement socket 100 mV/A. Breakdown detection, test · If the maximum bridge currents for the transformer controls or if the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hours counter to determine the test time. Manufacturer's price approx. €59,500 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), SEF LR 3 Fiber Laser Scanner Box SEF Hnjdpfx Asxqzu Iohvsi LR 3 Fiber Laser Scanner Box Heidenhain LC 18 Encapsulated Linear Encoder Measuring Length: 2240 mm Accuracy: +/- 5.0 µm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Heidenhain ROD 800.0000 - 36000 Id.Nr. 298 466 06 Incremental angle encoders with integral bearing Series: ROD 800 Hjdpfogix Aksx Ahvjni System accuracy ± 1 Mechanically permissible speed 1000 min-1 Interface: " 1 VSS Scope of delivery: 1 piece Item condition: NEW Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2022, Ask for specification and pricing! Hnsdpfjyi U A Rox Ahvei

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9C0P000082, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, table load: 7 kg, TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Field of view (precision measuring mode): 225 x 125 mm Maximum table load: 7.5 kg Repeatability (standard measuring mode, without moving the measuring table): ±1 µm Repeatability (standard measuring mode, with measuring table movement): ±2 µm Hodsyiy I Sopfx Ahvjni Repeatability (precision measuring mode, without moving the measuring table): ±0.5 µm Repeatability (precision measuring mode, with measuring table movement): ±1.5 µm Measuring accuracy (standard measuring mode, without moving the measuring table): ±3.9 µm Measuring accuracy (standard measuring mode, with measuring table movement): ±(7 + 0.02 l) µm Measuring accuracy (precision measuring mode, without moving the measuring table): ±2 µm Measuring accuracy (precision measuring mode, with measuring table movement): ±(4 + 0.02 l) µm Light probe measurement Measurable range (XY): 190 x 90 mm Maximum measuring depth: 30 mm Light probe diameter: 3 mm Probe contact force: 0.015 N Repeatability: ±2 µm Measuring accuracy: ±(8 + 0.02 l) µm MACHINE DETAILS Measuring head weight: 33 kg EQUIPMENT Programmable incident light for precise illumination Light probe for accurate surface measurements All documentation included Original packaging (OVP)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Repeatability: 0.01 mm MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Hodpjyfz Ulofx Ahvoni Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Condition: excellent (used), Year of construction: 2017, operating hours: 40 h, functionality: fully functional, input voltage: 230 V, total width: 1,600 mm, total length: 1,200 mm, total height: 2,100 mm, overall weight: 900 kg, workpiece weight (max.): 100 kg, For sale is a Zeiss ScanBox 4105 equipped with an Atos Q 12M 3D sensor, a high-precision optical 3D scanner designed for demanding measuring and inspection applications, fully automated within a robotic cell. The robotic cell was manufactured in 2017 and retrofitted in 2024 with a new Atos Q 12M 3D sensor. The system has seen little use and is in nearly new condition. The robotic cell has logged only 40 operating hours (axis movement). The sensor is fitted with the MV170 measuring volume. Included in the scope of delivery are a mobile controller and a tripod, as well as the original transport case for the sensor, allowing for flexible and manual use of the sensor outside the robotic cell. The supplied software package includes Zeiss Inspect Professional and Zeiss Blade Inspect. All original manuals and documentation are also included. Hnjdpfx Aeyir Hyehvei

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Hnodpfx Ajxr Umgshvei Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: ready for operation (used), Year of construction: 2019, A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible. Hedoyiflaopfx Ahvoni

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 479394, MOTORIZED FORENSIC COMPARISON MACROSCOPE LEICA FS C. YEAR 2019. NEVER USED! Hnodpfx Ajyifdcshvei Suitable for a wide range of forensic investigations, including ballistic analysis, tool mark examinations, and document comparison.

Condition: ready for operation (used), Year of construction: 2022, A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible. Hnsdou Rp Hyjpfx Ahvsi

Condition: ready for operation (used), Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision). Hnodpfx Aothmffehvei

Condition: ready for operation (used), Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible. Hedeun Stiopfx Ahveni

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Hnsdpfxsxu I A Hs Ahvoi

Condition: ready for operation (used), Year of construction: 2017, A Mitutoyo height measuring device including granite plate is available. Granite plate dimensions X/Y/Z: 1000mm/630mm/100mm, max. plate load: 300kg, plate weight: approx. 190kg, measuring range: 630mm, resolution: 0.001mm, min. repeatability: 1.8µm. Machine dimensions X/Y/Z: approx. 300mm/300mm/1050mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Hnsdoya Hx Ejpfx Ahvei

Condition: ready for operation (used), Year of construction: 1979, Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement. Hodpfsxzikrjx Ahveni

Condition: ready for operation (used), Year of construction: 2020, A thickness measuring device Scantech is available. Measuring frame width: 2500mm, sensor power: 5keV-15keV, max. web width: 2100mm, max. web speed: 200m/min, product tolerance at 57µm-63µm: +/-5%, measuring accuracy at 60µm: +/-0.3µm, max. ambient temperature: 45°C, orientation: Left-B. Machine dimensions X/Y/Z: approx. 3250mm/300mm/900mm, weight: approx. 400kg, control: Flexscan 6, interface: OPC-UA. Components: scanner, HMI, IO box, and various small parts. Documentation available. An on-site inspection is possible. Hsdpfx Aew R Dg Ijhvjni

Condition: ready for operation (used), Year of construction: 2019, Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm. Hjdpfxeti Adqj Ahvjni

Condition: ready for operation (used), Year of construction: 1984, Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment. Hjdpfx Ajxzik Eehveni

Condition: ready for operation (used), Year of construction: 2001, A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible. Hjdpov Ac Spsfx Ahvoni

Condition: ready for operation (used), Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible. Hnodpjv R Exuofx Ahvsi

Condition: ready for operation (used), Year of construction: 2001, A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible. Hodpfx Ahew D Evfjveni

Condition: good (used), Year of construction: 2003, functionality: fully functional, Measuring microscope incl. videovision and Multicount 200 and computer Hjdpfeyh Rh Dex Ahveni

Condition: excellent (used), HOMMEL WERKE LV-50E roughness measuring device. Hsdjvdybdopfx Ahvsni

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm Hnjdpfxevvxvds Ahvei