3D scan measuring system with robotic cell

Zeiss / GOM ScanBox 4105 mit Atos Q 12M

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Hjdow Rdvvjpfx Ad Usnh Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Hnsdoxr Umgepfx Ad Uoh Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system Hnodpsuq Nfhefx Ad Uoh MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver Hedow Swplepfx Ad Usnh ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Condition: good (used), functionality: fully functional, The high-quality 3D composite printer from the US company Markforged can be used to print extremely accurate, strong and durable parts reinforced with long carbon, glass or Kevlar fibers, inexpensively and quickly. Hjdpfxswcyycs Ad Uenh

Condition: good (used), Year of construction: 2015, measuring range Z-axis: 50 mm, feed length X-axis: 200 mm, travel distance Y-axis: 500 mm, A Mahr contour measuring station is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mahr GmbH Göttingen • Model: XC-20 With feed device: PCV-200 • Measuring range: approx. 0.2 to 200 mm • Measuring range (in Z): approx. 50 mm • Includes 2x measuring probes: - CP probe arm 350-M/16/16/6.5 double tip - PCV/CD probe arm 350 With measuring stand: ST-500 • Height adjustment range: approx. 500 mm • Hard stone measuring plate: approx. 700x550 mm With MCP-21 hand-held control panel Includes Midrange Standard control system • Year of manufacture: 2015 Hodpfx Adexpw Syo Uenh • Condition: Used, functional The MarSurf XC 20 is considered the absolute top-of-the-line device for contour evaluation. The optimally coordinated device configuration offers the highest performance standards. Shipping costs by freight forwarder: approx. £110 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours There are available all model materials licences available in 2019. Hnjdpfx Aow Imk Rod Ujh New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: like new (used), Year of construction: 2015, functionality: fully functional, For sale is an optical measuring system GOM ATOS CORE 80, year 2015, measuring field 80x80mm, including GOM measuring table (height stand and rotary-tilting table), including software, computer, etc. It has seen extremely little use. Hsdpfoxnr Dbex Ad Usnh

Condition: used, Bar fine pointer Passover meters Make Zeiss Jena 0-25 mm Hnedpfx Ajda Abajd Ush in the wooden box

Condition: excellent (used), Year of construction: 2019, operating hours: 1,500 h, 3D Printer Manufacturer: Stratasys Model: F370 Year of manufacture: 2019 Build volume (XYZ): 355 x 254 x 355 mm Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm Supported materials: ABS-M30, ASA, FDM TPU 92A, ABS-ESD7, PC-ABS, Diran 410MF07, ABS-CF10, FDM Nylon-CF10 Connectivity: Wired (Ethernet) and wireless (Wi-Fi) options Materials: Hsdpfsxk Uvljx Ad Uenh Spools of 1470 cc: ABS white: 1 x 100% / 1 x 80% ASA grey: 1 x 10% PC-ABS black: 1 x 100%, 1 x 30% Spools of 980 cc: ABS blue: 1 x 10% TPU 92A: 1 x 100% QSR Support: 2 x 100%, 1 x 30% Accessories: - Build plates: 14 x new, 3 x used - Clean Station UW40 with large and small basket - Carrier 40 (cart for Cleaning Station) - Print head (TPU) new - Z-table Stratasys