Used Material testing for sale (495)

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 sec. Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) Cgolsn Aq Ufjq R Dpqot (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Weight approx. 1350 kg Cslsu Au Utoq R Dpqsgt The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus temperature chamber Here we offer a temperature chamber. Water-cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Inside: W x D x H (mm) 800 x 800 x 790 Test chamber volume 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Heating speed: 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Weights: 675 kg Type: HT/S 7050 Celju Efm Soq R Dpqsgt R404 A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Colq R Dju Nh Rbjpqsgt We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Colq R Dpovaxq Nsqjgt Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Cgolq R Devcyawepqet Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer a Jouan C02 incubator CO2 incubator. The CO2 incubator is used to grow cell cultures. The following conditions are required for this: a sterile atmosphere a constant temperature a CO2-enriched atmosphere high humidity Dimensions and weight: Temperature range: room temperature + 5 ° C to 50 ° C CO2 detector: Infrared Size: 90 x 73 x 60cm Internal dimensions: 66 x 48 x 45 cm Outer material: steel Interior material: Stainless steel Inner door: Safety glass CO2 Incubator Jouan IG 150 Water jacket volume 85 liters maximum Cgelq R Deccb N Ujpqjt Volume 154 liters Maximum number of trays (3 supplied) Usable area per tray 0.16 m2 Usable maximum incubation area: 1.28 m2 minimum spacing height 66 mm empty weight approx. 80 kg Weight when filled with water approx. 170 kg Weight with packaging approx. 100 kg Power connection required: 230 V, 50 or 60 Hz. Power consumption max. 800 VA, normal consumption at 37 °C: 220 watts Fuses therm. Magnetic switch, set to 5 A at 220 V Phases earthed. Color of connections brown = phase, blue = neutral, yellow/green = earth Working range: Ambient temperature 15 - 30°C CO2 inlet pressure 300 mbar - 3 bar Interior temperature range from 5°C above room temperature to 45°C Working range with CO2 gas 0.0 % to 20.0 0/0 Article weight: 80.00 kg Type IG 150 Scope of delivery: (see picture) 2 weeks commissioning guarantee The device comes from stock. We deliver with express shipping (DHL, UPS, TNT) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Type: 4220A Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Cjlq R Decnic Sspqogt We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Cslq R Dpod Nfq Isqjgt Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 Celqogkaibs R Dpqsgt 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), RMS Vibration Test System Here we offer you a RMS electrodynamic vibration test equipment. RMS Vibration Test System Vibration exciter SW 3006 Power amplifier TGA 1500 Technical data: Sine:3,7 kN Noise:3,7 kN Shock:3.7 kN Displacement pk-pk:26 mm Speed: 0.9 m/s Acceleration: 80 g Cooling: air cooled Condition: used / used Untested! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Cgslq Rehyly Ro Dpqjt Further questions we can answer on the phone for you. Written order possible by email or fax

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Colqerbiyfj R Dpqogt Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Cgolqsrm Rihe R Dpqot Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Cjlqjtrf Ule R Dpqsgt Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), LDS Type: V895-440 HBT900C with amplifier SPA50K Technical data: Cgslq Rsuy H I To Dpqjt Fitting Dimensions: 440 mm Sinusoidal force vector 55.6 kN (peak) Rausch force vector 55.6 kN (effective) Half sine force vector 166.8 kN (peak) Frequency range 0 to 2100 Hz Sinusoidal acceleration max. 981 m/s² Noise Acceleration max. 490 m/s² Speed max. 1.6 m/s Deflection ± 63.5 mm Oscillator mass 55 kg Max. load 700 kg Amplifier dimensions : WxHxD mm : 537mm x 1905mm x 895mm Weight 622 kg Sliding table: Work surface: 900 mm * 900 mm Thickness of the top : 50 mm Weight of the top: 80.4 kg Max load : 7250kg Effective frequency range 5-2000 Hz Condition : gebraucht / used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: LxHxW approx. 2700 x 1500 x 1800 mm Scope of delivery: (see pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WK-1000/40/5 Weiss climatic test chamber with Weiss air-cooled condenser S!MCON / 32 control unit Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm, External dimensions: Height 1995 mm, width 1390 mm, depth 1855 mm, Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power 23 KW Rated current: 33 A Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 6.1 K/min Cooling: 6.7 K/min Heat compensation max. 5000 W Data for climate tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % r.h. Dimensions incl. feet Width x depth x height: 1190 x 1120 x 1093 mm Refrigerant: R404 A 5.2 kg Weight: approx. 840 kg Condition: used Scope of delivery: (see picture) Cjlqou Ap Smo R Dpqegt (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus Vötsch Type: VT 4021 Heraeus Vötsch temperature test chamber air-cooled Housing dimensions: Width 850 mm Depth 1250 mm Height 1640 mm Interior: Width 560 mm Depth 570 mm Height 630 mm Temperature range -40°C to + 180°C Cgolq R Dpou Hf Hhoqjt Temperature deviation in time ±0.2 to ±0.5 K Spatial temperature deviation ±0.5 to ±1.5 K Temperature change rate cooling 3.1 K/min Temperature change rate heating 2.5 K/min Nominal voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.5 kW Rated current: 7 A 2X side feed-through 90 mm Refrigerant: R-404A Weight approx. 325 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RMS Type: SW 3509 + amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power amplifier: TGD 6000 Vibration exciter: SW 3709 High-pressure fan HVM 80-100 GL 270 RMS electrodynamic vibration test system: Technical data system: Performance data Max. Vector force sine 7.5 kN Max. Vector force noise 6.75 kN Max. Vector force shock 13.1 kN Frequency range 0 - 3000 Hz Mass of the vibrating system (Dyn.) 9 kg Main resonance (unloaded) 2.5 kHz Max. Amplitude (sine) 18 mm (noise, shock) 26 mm Max. speed (sine) 1.5 m/s (noise, shock) 2.5 m/s Max. Acceleration sine vibrating system unloaded 833 m/s² Additional load 10 kg 394 m/s² Additional load 30 kg 192 m/s² Additional load 50 kg 127 m/s² Max. Acceleration noise Additional load 30 kg 173 m/s² Max. Acceleration shock vibrating system unloaded 1450 m/s² Additional load 30 kg 335 m/s² Stray field Stray field without counter field coil On the table surface 20 mT 120mm above the table surface 7 mT Stray field with counter field coil On the table surface 10 mT 120mm above the table surface 2 mT Vibration isolator Operating range vertical/ horizontal Resonant frequency 2.7 Hz Operating air pressure 5 bar Pneumatic weight compensation Max. Weight compensation 250 kg Operating air pressure 2.3 bar Cooling Vibration exciter air min. Cooling air volume 9 m/min Max. exhaust air temperature (based on room temperature 35°C) 80°C Cgjleu Tud Hoq R Dpqst Power booster air Heat dissipation to room air 1.5 kw Emission: Sound pressure level 1m - distance at a height of 1.6m 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT ( 50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / insert thread 224mm / M8 Vibration exciter with integrated isolators 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier 550 x 700 x 2075 mm (W x D x H) Weight: 270 kg Cooling fan 839 x 582 x 900 mm (W x D x H) Weight: 80 kg Connection values: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load 18 KVA Power consumption (sweep mode sine wave) 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm Cgslq R Dpot Igc Sjqet External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Espec Temperature Shock Chamber Here we offer you an Espec temperature shock chamber. Thermal shock environmental chamber (cold load: -65° to 0°C). Conventional thermal shock chambers with three zones can be quite large because three separate chambers are used. The TSA series has only one chamber, significantly reducing its size. Instead, it circulates cold, hot or ambient air as needed. The conditioned air can be precooled or preheated beyond the set point, allowing for faster recovery to the desired condition after transfer. Espec Temperature Shock Chamber Water Cooled TSA-201S SN: 153000154 Hot chamber: +60 to 200°C Cold chamber: -70 to 0°C Working temperature: 0-40°C System: two zone or three zone test by flap switching. Performance: Test range: High temperature. Exposure range: +60 to +200°C Low temperature. Exposure range: -70 to 0°C Temperature variation ±0.5°C Hot chamber: Temperature Heating time: ambient temp. to +200°C within 15 min. Cooling chamber: Temperature Pulldown time: ambient temp. to -75°C within 45 min. Temperature recovery: within 10 min. Inner dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Cgjlq Reg S Ugko Dpqjt Power supply: 380/400/415V AC 50Hz: 70 A Refrigerant: R404/R23 Weight: approx. 1400 kg Type: Espec Model: TSA-201 SW For you as a buyer, the following information for your safety! The following points are checked on our offered chambers in advance.

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Microanalysis of elements including boron and above Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Cgolq Rjhx Nchs Dpqet Operating humidity

Condition: excellent (used), Heraeus Type: HA 2472 BS Cleanroom workbench for installation and operation in laboratories Interior dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Condition: used Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Celq Rjvyd Ade Dpqegt

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C without thermal test room touch Cgjlq R Dpevx S Hhsqjt Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, Cslevx Su Sjq R Dpqegt which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Leco LECO C230 CARBON ANALYZER Carbon analyzer C230 The LECO C230 carbon analyzer is a microprocessor-based, Cgolq R Dju Ndyxepqet software-controlled instrument for measuring the carbon and sulfur sulfur content in metals, ores, ceramics and other inorganic inorganic materials. The C230 uses an induction furnace and measures carbon by infrared absorption. The infrared (IR) source consists of nichrome wire, which is heated by heated to 8500 °C by resistance heating. The IR source emits visible energy and all wavelengths of the infrared spectrum Carbon dioxide can be used for the description; the same principle applies to sulphur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. within the IR spectrum. Energy from the IR source is absorbed, when the gas flows through the cell, preventing it from reaching the IR detector. An IR cell is used both as a reference and for measurement. Total carbon in the form of carbon dioxide is detected continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell. established by passing oxygen through the cell to drive out residual atmospheric gases. Technical data: Gas required: Carrier gas: Oxygen 99.5 % pure, 40 psi Pneumatic gas: Compressed air, nitrogen or argon, 40 psi (2.76 bar), Source must be free of oil and water Gas flow (based on nominal analysis time) Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulator Oxygen: 501-291 O 2 pressure regulator Compressed air: 766-036 Compressed air regulator Inert gas: 764-216 Inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data transmission: Included Data storage Without PC: 10 sample weights, 50 responses, 5 methods Without PC: Internal membrane /External optional display Without PC: Liquid crystal (16 x 26 characters) Power requirement Determinator: 230 Ṽ̃̃, ± 10 %, 50/60 Hz, Single-phase, 15 amps max. Operating current: 12 A Standby current: 4 A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.