Used Material testing for sale (495)

Year of construction: 2019, Condition: good (used), The sample material is weighed and placed into a sample tray. The sample tray itself is part of an integrated reactor within the HydroTracer. A heater warms the sample – temperatures between 50 °C and 210 °C are freely selectable. The water evaporating from the sample reacts with the reagent in a cooled area and water is transformed into hydrogen. Other volatile substances will condense at the cooled surfaces within the vessel. The concentration of hydrogen gas is measured. It is a measure for the amount of water in the reactor. The concentration of hydrogen is a measure of the sample humidity. The percentage of water of the sample is calculated by division with the sample weight. The HydroTracer is controlled via a PC program. The program gives the user precise instructions so that operational errors are largely eliminated. The measurement is simple and requires only a few steps, each measurement is needed about 2 minutes of working time. The operation is supported by image-assisted program instructions. This method shortens the training period considerably. In principle, even an inexperienced user will be able to perform an accurate measurement. Cebvdpgjk Nzvvjaegt Test Time:10 – 45 Minutes Test Temperature:50 – 210°C (adjustable in 1°C steps) Sample Weight:0.01 – 50 g Reagent:CaH2-Pads / CaH2 granular form Measuring Range:0.2 – 25 mg (absolute)0.0005 – 5% (relative) Accuracy:Measuring error < 2% Resolution:1 ppm (0.0001%) 0.1 – 0.8 mg (depending on measuring range) Ambient Conditions:-10…40°C / 90% rH (not condensing) Power Supply:100 – 240 VAC (50/60 Hz) / 1000 W Weight:6.4 kg Dimensions:290 x 180 x 260 mm (H x W x D) Interface:USB System Requirements:PC with min. WIN 9-10-11 SP 1 or later

Year of construction: 2019, Condition: as good as new (ex-display), ZHU250CL-S semi-automatic universal hardness tester - Test load range 0.5 - 250 kg - Innovative force application with closed control loop - for use with an optional manual cross table - For use with ZHµ.HD-S software for automatic indentation measurement and progression generation - Includes a flat test table with ø70mm Cgeborpmrgjvdpgaot - For Vickers, Knoop, Brinell, Rockwell and Superficial Rockwell - Brinell tests - HBW 1/1 to HBW 5/250 - Brinell calibration according to BS EN ISO 6506-2 and ASTM E10 - Rockwell tests - All 30 Rockwell & Superficial scales - Rockwell Calibration to BS EN ISO 6508-2 and ASTM E18 - Vickers tests - HV0.5 to HV100 - Vickers Calibration to BS EN ISO 6507-2 and ASTM E384 - Knoop calibration according to BS EN ISO 4545-2 and ASTM E384 - Data output USB - Automatic test sequence - Motorized turret with 8 positions for up to 4 objectives and 4 indenters - LED illumination with individual setting for each objective The device includes - 1x Rockwell diamond indenter - 1x 1/16 Rockwell ball - 1x 2.5mm Brinell sphere - 1x Vickers diamond pyramid - 4x objectives (5x / 10x / 20x / 40x)

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Cgebvotyia Eodpgaot

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Cebvdstyibispgaegt

Condition: refurbished (used), We are selling this used hardness tester in its current condition. Price on request. Cobvdpstyicasgajgt

Condition: used, We are selling this used hardness tester in its current condition. Price on request. Cjbvdpstyicmjgaegt A general overhaul may be possible, please contact us.

Condition: as good as new (ex-display), Year of construction: 2024, DuraScan 20 G5 micro/small load hardness tester for Vickers, Knoop and Brinell for standard-compliant testing to EN ISO and ASTM - Torsionally rigid cast aluminum base body, granite base plate with vibration-damping feet for main load range 10 g - 62.5 kg (0.098 - 613.16 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically motorized test unit Cobver Ilmyjdpgajgt - 12MPix color camera for 3-step zoom - Manually swiveling 3-fold measuring turret - incl. 2 objective and 1 indenter adapter - Motorized linear Z-axis, travel 235 mm - Manual cross slide with analog micrometer spindles, travel 25 x 25 mm - Height adjustment for rapid traverse 20 mm/s - High-performance LED incident light illumination - Capacitive 10" touch display with LED backlight - Integrated PC with Win 10 IoT 64-bit and 128 GB SSD memory - Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 - ecos Workflow Touch basic operating software incl. 1 test method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell - Automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CHD-M for creating manual Chd, Nht, Rht and series measurements with inspection coordinates - ecos CODE for reading and creating QR codes - ecos EXPORT EDITOR for customizing the export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) - ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 28.224,-€ incl. 1 test method. Additional test methods can be activated for an additional charge.

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, DuraVision 200 G5 small load/macro hardness testing machine for Brinell, Rockwell, Vickers and Knoop for standard-compliant testing to EN ISO and ASTM as well as plastics testing to ISO and carbon testing to DIN - Torsionally rigid cast iron base body for main load range 0.3 kg - 250 kg (2.94 N - 2,452.5 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically motor-adjustable test unit - 12MPix color camera for 3-step zoom Csbsr Ilc Tsvdpgasgt - Motorized 3-position star turret incl. 1 objective and 1 indenter adapter - Removable clamping jaws with clamping inserts enable unclamped and clamped tests - Motorized Z-axis, travel 500 mm - Test height 500 mm, throat depth 320 mm - Adjustable clamping force 200 kg - 2,000 kg - Height adjustment for rapid traverse 25 mm/s - Support, dimensions (WxD) 370 x 447 mm - Plant table, support diameter 90 mm - Maximum weight of the workpiece 500 kg - High-performance LED incident lighting - Capacitive 10" touch display with LED backlight - Integrated PC with Win 10 IoT 64-bit and 128 GB SSD memory - Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 1x Ethernet - ecos Workflow Touch, intuitive basic operating software incl. 1 test method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell, automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CODE for reading and creating QR codes - ecos EXPORT EDITOR for customizing export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow Touch - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant tests of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 44.984,-€ incl. 1 test method. Additional test methods can be activated for an additional charge.

Condition: used, We are selling this used hardness tester in its current condition. Price on request. Cebvdpgstyih Njasgt A general overhaul may be possible, please contact us.

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Csbvdpgstyiiysasgt

Condition: used, Year of construction: 1981, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Csbvjtyil Ijdpgajgt

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Cjbvjtyil Uodpgaegt

Condition: refurbished (used), Refurbished universal hardness tester Price: € 13,500 plus Brinell, Vickers and/or Rockwell package Cgebvdstyimfspgast

Year of construction: 2024, Condition: as good as new (ex-display), DuraScan 70 G5 micro/small load hardness testing machine for Vickers, Knoop and Brinell for standard-compliant testing to EN ISO and ASTM - Torsionally rigid cast aluminum base body, granite base plate with vibration-damping feet for main load range 10 g - 62.5 kg (0.098 - 613.16 N) - PLC measurement and control electronics for monitoring the load application with automatic test load change and vertically/horizontally motorized test unit - 12MPix color camera for 3-step zoom - Motorized 6-fold measuring turret incl. 5 objective and 1 indenter adapter - Motorized X, Y and Z linear slides in asym. Arrangement, travel 150 x 150 x 260 mm (X/Y/Z) - Large wear plate 150 x 200 mm - Height adjustment for rapid traverse 20 mm/s - ecos overviewPRO, 12Mpix color camera with macro lens for user-friendly placement of test points in the live image (field of view 65x50 mm) - Precise display thanks to coaxial illumination - High-performance LED incident light illumination - Control via external PC system (available separately as option ETZ12-D) - ecos Workflow Pro basic operating software incl. 1 inspection method - ecos IMAGE for fully automatic, standard-compliant image evaluation by Vickers, Knoop and Brinell - Automatic brightness control and autofocus with statistics and test report function - ecos templates for frequently used settings - ecos CHD-C+ for creating automatic Chd, Nht, Rht and series measurements with test coordinates (up to three hardness limits per series possible) - ecos multiple sample module for programming and fully automatic measurement of multiple samples - ecos Panorama for creating high-resolution overview images with live in image function - ecos EXPORT EDITOR for individual customization of export data (format: PDF, Excel, XML, CSV) - User administration for individual customization of access rights in ecos Workflow Pro - ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Price: 49.080,-€ incl. 1 test method. Additional test methods can be activated for an additional charge. Cobvdpsr Ilfcsgajgt

Condition: refurbished (used), Refurbished universal hardness tester Cgsbotyimxevdpgast Price: € 13,500 plus Brinell, Vickers and/or Rockwell package

Condition: good (used), We are selling this used hardness tester in its current condition. Price on request. Cgjbvdpotyim Eegaot

Condition: used, We are selling this used hardness tester in its current condition. Price on request. Cgjbvdpstyincogaot A general overhaul may be possible, please contact us.

Condition: used, We are selling this used hardness tester in its current condition. Price on request. Cebvdotyitrspgaogt A general overhaul may be possible, please contact us.

Condition: good (used), We are selling this used hardness tester in its current condition. Cgsbvdpgetyivaoaet Price on request.

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Csbvdetyivgopgaogt

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Cgsbvdpstyivyegajt

Condition: used, We are selling this used hardness tester in its current condition. Cebvdpjtyiv Togasgt Price on request. A general overhaul may be possible, please contact us.

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Cgsbvdpgetyiwksaet

Condition: used, We are selling this used hardness tester in its current condition. Price on request. A general overhaul may be possible, please contact us. Cjbvdpgotyiwwsasgt

Condition: used, We are selling this used hardness tester in its current condition. Cjbvdpjtyiw Djgasgt Price on request. A general overhaul may be possible, please contact us.