Used machine and parts cleaning equipment for sale (121)

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior Itedpjf A D Nmefx Ahvjd - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Very little used Full vacuum technology Itedpfx Aevyp D Tshvod 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm The system has been technically tested by us for functionality. We can quickly provide training, commissioning, service, and spare parts. We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer Itsdjtqfbbjpfx Ahvod The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. Iodpordyb Asfx Ahvotd and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1990, operating hours: 12,332 h, functionality: fully functional, machine/vehicle number: 1684, total length: 5,000 mm, total width: 2,350 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, pressure: 7 bar, heating capacity: 63 kW (85.66 HP), operating pressure: 7 bar, BvL cleaning plant / washing system Hot wash system Chamber/trolley dimensions: 2200x800x900 mm Was in operation until 04/25, then cleaned and decommissioned. Will be dismantled in July 2025. Trolley for hanging parts is available. Various spare parts are available and included with purchase. See drawing and pictures. For further information, please feel free to contact me. Itjdpfsw Dpk Hex Ahvjd

Condition: new, ESP Top Loading Spray Washing Machines Itjdpfx Ahst Rrksved ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, MSP – Manual Hand Spray Systems The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants. Itsdeh E Szmopfx Ahvsd

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Itsdpfxox El A Us Ahvjd Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) Itodpfx Ahogvaazeved OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L Isdpfx Aheu R Urhsvetd - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: new, SprayClean Front Loading Spray Washing Machines Itodpe T D R Dsfx Ahvjd SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Isdpfx Asxztt Djhvetd Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Compressed air connection: max. 10 bar MACHINE DETAILS Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS Iodpfx Ahsxm Szqovetd This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use. Itjdowfdpmepfx Ahvsd

Year of construction: 2020, condition: good (used), machine/vehicle number: 054889, Aduna K100 2-Bath Cleaning System (Washing + Rinsing) incl. Vacuum Drying Including the following equipment: - Vacuum drying (Busch pump, rotary vane pump type RA) Ijdpfx Aoxz S Utjhvjtd - Pressure flood spray function incl. quick-flooding - Spray function with 4-arm spray nozzles - Reinforced pump system 5.5 bar - Nozzle air purge to prevent cross-contamination of media - Impulse drying with thermal coupling - Chip filtration (bag filter) in media return - Automatic sliding door (vertical with viewing window) - Oil separator - Swath steam condenser, air-cooled - User-friendly, programmable control system - Timer, media level control (level regulation) - Automatic dosing unit - Cascading from tank-2 to tank-2 - Remote maintenance Automatic loading unit (buffer for 3 baskets in the loading area, 1 basket in front of the chamber, 3 baskets in the unloading area - 3-1-3) 8 Euro-standard baskets (dimensions: 670x480x400 mm) Max. load: 100 kg Connected load: 27 kW, 55 A For dimensions, see attached layout.

Condition: used, Technical details: drum diameter: 400 mm revolutions per minute: 980 U/min total power requirement: 2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray Itodoft Tipopfx Ahvsd Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Technical details: drum diameter: 600 mm weight of the machine ca.: 0,42 t Lanner batch wringer ME61-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 100 Liter/max. 200 kg Iedpfeft Tkqsx Ahvjtd -rotation speed max. 740 min-1 -power 5,5 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray Please, contact us for getting more information and pictures on mail(at) or *

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Itsdpfx Aeq Ewgkohvsd Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Equipment features: • Operating hours counter • Stainless steel safety grate Itsdewzwuzopfx Ahvsd • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours.

Condition: used, Year of construction: 2017, operating hours: 14,441 h, functionality: fully functional, total height: 2,450 mm, total width: 1,850 mm, total length: 4,300 mm, Currently in stock. Available immediately. Itodpfx Ahovb Hpvsved The system has been completely overhauled since January 22, 2025.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, empty load weight: 320 kg, cage diameter: 790 mm, working height: 930 mm, machine/vehicle number: S2327, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates collection within the specified period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Rotary basket load capacity: max. 500 kg Compressed air connection: max. 6 bar Loading height: approx. 930 mm Usable basket diameter: approx. 790 mm Fluid volume (wash solution): 140 l Pump output (washing): 200 l/min Spray pressure (washing pump): 3 bar MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 15 A Isdpfx Ahoxm Riysvstd Connection power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 1,300 x 1,500 mm Weight: 320 kg

Condition: excellent (used), VE-water circulation system for the treatment of rinsing baths Itsdjxvllnspfx Ahved

Year of construction: 2023, operating hours: 4 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10220, The hyCLEANER® red EVO I cleans different forms of façades, surfaces and materials: very gentle, effective, fast and above all, economic. The machine works with highpressure water and does not need any electrical connection. Both, the glass and the frames are cleaned simultaneously. All water leading elements are made out of stainless Itjdoxnlz Hepfx Ahvsd steel. Purified-water can be used and the glass surfaces dry up, leaving no streaks behind. A further advantage of hyCLEANER® red EVO I is the running wheels. They do not leave any marks on the surface of the façade - gentle cleaning can be so easy!

Year of construction: 2023, operating hours: 1 h, condition: new, machine/vehicle number: MANUWASH3128, INTERSONIK Manuwash is perfect solution for manual parts washing. It is safe economic and user friendly. Manuwash can be manufactured with options and dimensions according to your requirements. Ijdpfsd Tg Nnex Ahvetd Ideal for car repair shops and auto repair services. Please do not hesitate to contact with us for technical details. Please check the attached brochure for other details.

Year of construction: 2023, condition: new, Spiral washer, used for cleaning small parts like bolts-nuts-screws etc. Tunnel-type spiral washer, parts are loaded via vibrating table and transferred via spiral conveyor. Itjdpfx Ajfhb Icshvsd Washing-rinsing-drying options are available Parts washer for small parts. Automatic washing machine, small parts washing, stamped parts washing machine, spiral washer, bolt washer, nuts washer, screw washer