Vigilance ESP Ltd

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ Gujlhcdwswfdzcozob TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: used, Year of construction: 2011, 2011 Mazak Quick Turn Nexus 250-II M in superb condition with Mazak Matrix Nexus Control, 12-position turret, live tooling , chip conveyor, high-pressure coolant system, automatic tool presetter, and part catcher. ----- Machine Specification: CONTROL Mazak Matrix Nexus Control 15” Color LCD Touchscreen Mazatrol conversational programming (also supports G-code) Networking capabilities: Ethernet, USB, FTP, DNC CAPACITY Chuck size (main spindle): 10” Maximum swing: 610 mm Maximum machining diameter: 350 mm Maximum turning length (1000 mm bed): 1,025 mm Maximum turning length (500 mm bed): 515 mm Max bar work capacity (main spindle, dependent on chuck system): 76 mm MAIN SPINDLE Rotating speed maximum: 4,000 min⁻¹ Motor output (30-minute rating): 26.0 kW Guelhcdsvt Ehzjwzjb TURRET Number of tools: 12 Mill spindle motor output (10-minute rating): 5.5 kW FEED AXES Travel (X axis): 190 mm (500 mm bed) / 225 mm (1000 mm bed) Travel (Z axis): 515 mm (500 mm bed) / 1,025 mm (1000 mm bed) / 1,535 mm (1500 mm bed) Rapid traverse (X axis): 30 m/min Rapid traverse (Z axis): 30 m/min ACCESSORIES Chip conveyor (optional) High-pressure coolant system (optional) Automatic tool presetter (optional) Part catcher (optional) MACHINE SIZE Machine dimensions (L x W x H): 2,475 mm x 1,780 mm (500 mm bed) / 4,382 mm x 2,095 mm (1500 mm bed) Machine weight: Approx. 7,500 kg Total power consumption: Approx. 20 kVA Control: Mazak Matrix Nexus Control Spec: Spindle Bore 76 mm | Max Swing 610 mm | Travel mm X 190 Z 616 Accessories: Tailstock, Tool setter, Parts catcher, Swarf conveyor & Tooling Package

Condition: used, Year of construction: 2008, Used 2008 built Hardinge Bridgeport GX 600 in immaculate condition,with Heidenhain i530 control, swarf conveyor & fitted with the optional 12,000 RPM BT 40 spindle, an option very rarely fitted to this model! USB Port Please Note: Photos of the machine are taken as installed, better pictures will be taken on arrival. Control: Heidenhain i530 Spec: X600 Y540mm Z510 mm | 12000RPM | BT40 Accessories : swarf conveyor, USB Port Spindle: 20 HP (15kw) Spindle speed: 12,000 rpm (belt-driven) Rapid traverse rates: 30M/Min Gelhsvq Ry Rscdwzoub Tool changer: 20 Working surface: 750mm x 540mm Floor space: 2215 mm x 2490 mm Max machine height at tool changer position: 2713mm Approx machine weight: 5500kg

Condition: used, Year of construction: 2011, Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set. SPECIFICATION: TRAVELS: X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm TABLE: Length 1120 mm, Width 540 mm T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg SPINDLE: Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque 82.76 Nm, Drive System Direct Speed Belt Drive, Taper BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled FEEDRATES: Rapid and Jog (Max.) 36 m.min Cutting Feed Rate (Max.) 12 m.min AXIS MOTORS: Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW TOOL CHANGER: Type Carousel, Capacity 20 Max tool diameter 89 mm Tool length Max. 250 mm Tool weight Max. 6 kg Guelhovq Ry Djcdwzob Tool change time 6 sec GENERALS: Air Required 4 scfm, 700 psi /min Power supply 45A FLA / 400 v / 3 phase Coolant Capacity 360 L Control: Siemens 828D Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40 Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC

Condition: used, Year of construction: 2012, Used 2012 CMZ TB67M is a compact, high-performance CNC lathe designed for precision turning in a variety of industries, including automotive, aerospace, and general manufacturing. This machine is capable of handling complex parts with tight tolerances, its has a powerful spindle and driven tool turret. The machine is in very well-maintained condition and available in the Bristol showroom for a powered Demo. Technical Specifications: Max. Swing Diameter 640mm Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Spindle Size / max bar Ø: 66mm Power: 17.4 Kw Turret 12 positions. Gslevq Rxaehcdwzsub No of driven stations: 12 Live Tool Power: 6 Kw Motorized rotation: 4,000 rpm Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Dimensions (L x W x H): 1,653 x 1,620 x 1,670 mm Machine Weight: 3,700 kg Additional Equipment: C-Axis & Driven Tools Parts Catcher Swarf Conveyor Tailstock Tool Measuring Arm Suite of station & driven heads LNS Bar Feeder 3-Jaw Hydraulic Chuck Spec: Max Swing 640 mm | Travels X-Z 200-400 mm | 4000 RPM Accessories: C-Axis & Driven Tools Parts Catcher Swarf Conveyor Tailstock Tool Measuring Arm Suite of station & driven heads LNS Bar Feeder 3-Jaw Hydraulic Chuck Name of the machine: CMZ TB-67M

Condition: used, Year of construction: 2007, Used 2007 Mori Seiki NH 5000- DCG 4-Axis Horizontal Machining Centre with MSX701- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing, in super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new machine having spent its life in a 1st Tier Aerospace sub-contractor. Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 499.1 kg Number of tool pockets 60 Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 Kw Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg Stock number: Guolevkwlgjhcdwzob cmj/0203 Control: MORI MSX-701-iii Accessories: CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing Name of the machine: Mori Seiki NH 5000 DCG / 40 No of pallets: 2

Condition: used, Year of construction: 2007, A 2007 Built Hardinge Bridgeport XR760 with Fanuc 18iM control, 12,000 RPM RPM spindle with through coolant, 30 tool rapid ATC & swarf conveyor X Axis 760mm, Y Axis 610 mm, Z Axis 610 mm Working Surface 1000 x 600mm, Table Load 900 kg, Number of T-Slots 5, T-Slot Size 18 mm, T-Slot Center Dimension 100 mm Table Surface to Spindle Gauge Plane Distance 100 to 710 mm Feedrate Range (X and Y Axis) .0025 - 20 m/mm Feedrate Range (Z Axis) .0025 - 20 m/mm Ball Screw Dia. and Pitch (X and Y Axis) 45 x 16 mm, Z Axis 45 x 12 mm, Spindle 12,000 RPM Fanuc Motor HP Rating (S6 40%) 25Kw, Torque (S6 40%) 159.2Nm, Spindle Taper BT 40 Magazine Capacity 30 Tools Max. Tool Diameter 125 mm (adjecent pocket) 80 mm Max. Tool Length 300mm, Max. Tool Weight 7 kg, Coolant and Chip Management Swarf Removal Chip Conveyor, Coolant Tank Capacity 355L, Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard, Through Spindle Coolant Accuracy - ISO 230-2. Positioning - A 0.010 mm, Repeatability - R 0.004 mm, Machine Size, Machine Dimensions (WxD) 2528 x 3000 mm. Electrical Supply (Input)—Balanced 3-Phase 50 or 60 Hz, Power 25 KVA, Voltage, Compressed Air (Pressure / Flow) 4.9 cfm, Coolant Flow Rate at Cutter 160 L/min. Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Control: Fanuc 18iM Guslhovkwk Ajcdwzjb Specification: Travel X 760 Y 610 Z 610 mm | 12000 RPM | BT40 Accessories: 30 tool rapid ATC & swarf conveyor Name of machine: Hardinge Bridgeport XR 760 Rapids: Auto Mode (X and Y Axis) 43 m/mm. Auto Mode (Z Axis) 36 m/mm

Condition: used, Year of construction: 2014, Used 2014 Hurco VM10i with Winmax control, with 10,000 RPM spindle, rigid tapping & helical ramp options. Control options TBC. In immaculate condition! X Axis 660 mm Y Axis 406 mm Z-Axis 508 mm Control WINMAX (V09.01.121) Table Size 762 x 406 mm Taper SK/BT40 ATC positions 24 Spindle Power 11 kW Spindle torque 74 Nm MAX RPM 10000 rpm Feed rate 24000 mm/min Rapid Trav 28 m/min Machine weight approx. 2850 kg Machine Size 1800x1300x2400 mm Control: Hurco Winmax Spec: Travel X660 Y406 mm Z508 mm | 10000RPM | CAT40 Accessories: 10,000 RPM spindle, rigid tapping & helical ramp options Gujljvkwh Uohcdwzsb

Condition: used, Year of construction: 2012, Used 2012 built Doosan Lynx 220B CNC lathe with Fanuc control, 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. Bar Capacity 51mm Chuck Size 200mm FANUC Oi-Series Maximum Cutting Diameter 320mm Maximum Cutting Length 305mm Gelhcdsvkwh Ijwzjub Rapid Feedrates XZ: 30 x 36m/minute Spindle Motor Power 11kW Spindle Nose A2-6 Spindle Speed 5000rpm Swing 510mm Swing Over Carriage 290mm Tailstock Quill Stroke 80mm Tailstock Taper MT #4 Tool Size 25 x 25mm Turret Positions 12 Station Machine Dimensions 3049 x 1620 x 1655mm Machine Weight 3100kg Control: Fanuc Spec: Spindle Bore 52 mm | Swing 510 mm | Travel X 175 Z 552 mm Accessories: 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. Name of machine: Doosan Lynx 220B Main spindle turning diameter max: 320mm Main spindle turning length max: 533mm Main spindle chuck diameter: 200mm Main spindle max swing: 510mm Main spindle bar diameter max: 65 mm Tail stock quill and body: Standard Rpm: 6,000 rpm

Condition: used, Year of construction: 2017, Used 2017 HAAS ST15 with tailstock, tool setter, parts catcher & swarf conveyor. Ready for demo in the Bristol showroom. Chuck Size 210 mm Max Part Swing 419 mm Max Cutting Diameter (with BOT turret) 305 mm Max Cutting Diameter (with VB turret) 305 mm Max Cutting Diameter (with VDI turret) 173 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 64 mm X Axis Travel 200 mm Z Axis Travel 406 mm Spindle Nose A2-6 Max Rating 20.0 hp 14.9 kW Max Speed 4000 rpm Max Torque 150.0 ft-lbf @ 500 rpm 203.0 Nm @ 500 rpm Spindle Bore ø 88.9 mm Control: HAAS Golhcdwsvkwg Djzoub Specs: Spindle Bore 64 mm | Swing 419 mm | Travel X 200 Z 406 mm Accessories: Tool setter, Parts catcher, Swarf conveyor

Condition: used, Year of construction: 2016, Used 2016 built Doosan DNM 5700 heavy duty VMC with Fanuc wide screen control, 12,000 RPM direct drive, face & taper BT 40 spindle with through coolant. Technical Specification X Axis Travel distance 1050 mm Y Axis Travel distance 570 mm Z Axis Travel distance 510 mm Guolhsvkwc Sscdwzsb X Axis Rapid Traverse 36 m/min Y Axis Rapid Traverse 36 m/min Z Axis Rapid Traverse 30 m/min Max. Spindle Speed 12000 r/min Max. Spindle Power 18.5 kW Max. Spindle Torque 117.8 N·m Table Length 1300 mm Table Width 570 mm Max. Table Weight 1000 kg Product Dimensions Length 2413mm Width 3100mm Height 2985mm Weight 6500kg Control: Fanuc Specs: Travel X1050 Y570 Z510 mm | 12000RPM | BT40 Accessories: Through Spindle Coolant, Spindle Chiller, Swarf conveyor

Condition: used, Year of construction: 2013, Used 2013 built Doosan DNM 650 ii heavy duty VMC with Fanuc control, 12,000 RPM direct drive, face & taper BT 40 spindle with through Spindle coolant and spindle chiller, Renishaw part and tool probe, Swarf conveyor. Specification: Axis X1270 mm Axis Y670 mm Axis Z625 mm FANUC OI-MC Table length 1300 mm Table width 670 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper BT40 Max. spindle speed12000 rpm Spindle motor power 15 kW Gelhcdwevkwc Eezjub Length x width x height 4345.0 × 2720.0 × 2815.0 Weight 8500 kg Control: Fanuc Spec: Travel X1270 Y668 Z625 mm | 12000RPM | BT40 Accessories: Through Spindle coolant and spindle chiller, Renishaw part and tool probe Swarf conveyor, Mist extractor

Condition: used, Year of construction: 2014, Used 2014 HAAS VF-2 Golhsvkwclecdwzoub Immaculate and well maintained TRAVELS: X Axis 30 " 762 mm, Y Axis 16 " 406 mm, Z Axis 20 " 508 mm, Spindle Nose to Table 24 " 610 mm, Spindle Nose to Table 4 " 102 mm TABLE: Length 36 " 914 mm, Width 14 " 356 mm, T-Slot Width 5/8 " 16 mm, T-Slot Centre Distance 4.92 " 125.0 mm, Number of Std T-Slots 3 3, Max Weight on Table (evenly distributed) 1500 lb 680 kg Control: Haas Spec: X762 Y406 Z508 mm | 8000RPM | BT40 Accessories: MPG Handwheel, Directional coolant nozzle

Condition: used, Year of construction: 2009, Mori Seiki NZ1500T2Y Year 2009 Used Mori Seiki NZ1500, with Twin Spindle, Twin Turret, with Driven Tools & 2 x Y Axis, CNC Lathe with Barfeed, Swarf conveyor, Parts unloader, and parts conveyor. Fitted with Mori Seiki Fanuc based MSX-701 iii control. Note: Photo'd as received this morning, more pictures to follow once power up. Control: MSX-701III Capacity: Swing over bed 800 mm. Max distance between spindle nose 1,130 mm. Max. turning diameter 320 mm. Max. workpiece diameter for transferring 300 mm. Max. turning length 810 mm. Bar work capacity 52 mm. Axis: X1 Axis Travel 210 mm. X2 Axis Travel 210 mm. Y1 Axis Travel +65 / -45 Y2 Axis Travel -65 / +45 Z1 Axis Travel 810 mm. Z2 Axis Travel 810 mm. Spindle 2 B-Axis Travel 900 mm. C Axis in Main Spindle INCLUIDO/ INCLUDED Feeds: Feed X1/X2 Axis 30.000 mm./min. Z1/Z2 Rapid Feed Z1/Z2 Axis 50.000 m./min. Work feed 0-5000 mm/min. Main Spindle Speed: 60-6.000 rpm Speed ranges 2 Power: 22//18 kW Quill diameter 61 mm. Nose A2-5 Min Spindle indexing range 0.001º Spindle 2 Speed: 60-6.000 rpm Power: 22//18 kW Quill diameter 61 mm. Nose A2-5 Min Spindle indexing range 0.001º Turret Gjlhcsurlhnjdwzeub Turret type 16 station x 2 Driven Tools Speed 6.000 rpm Max Power Driven Tools 7.5 / 5.5 kW Equipment Swarf Conveyor Parts unloader Parts conveyor Bar Feed Hydrafeed Multi Servo Machine Weight 8.300 kg Machine Dimensions (LxWxH) 3.930 x 2.718 x 2.320 mm