Used Canned Filling for sale (22,933)

Condition: used, Year of construction: 2017, operating hours: 30,000 h, machine/vehicle number: LC566, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Fgodjy I R Easpfx Alqsb Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging

Condition: ready for operation (used), Year of construction: 2012, A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible. Fedpsy N Uv Sofx Alqogb

Condition: ready for operation (used), Year of construction: 1987, A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Fjdpfx Aey N Uvxelqjgb

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Note: The byer will another machine- same as the offered for spare parts. Fsdpjimblqjfx Alqogb

Year of construction: 2014, condition: excellent (used), 1- 250 ml 500 ml Ektam filler mega block 40/6 2014 model 25.000 can/hour Fgjdpfx Ajyxg Irjlqeb 2- premix ektam 2014 3- Paletiser cosmopack 1999 model 4- Mimpak Shirink 2017 model 5- Pastorizer Alfa Tek 2013 model Line is in or working condition

Condition: used, Year of construction: 2020, functionality: fully functional, Model: MLE6661-CAN-002 Year: 2020 Speed: 1,500 cph Product: Beer Machine layout: Linear, left-to-right Rinser with 6 clamps Fixed nozzles 2 air treatments Isobaric filler with 6 valves Fedpfx Aloywyyreqjgb Valve type: Electropneumatic Valve functions: Gas injection, leveling, degassing Caps distributor with 6 positions Gas flushing system Single-head seamer Applicable lid type: 202 ends (Ø 52 mm) Safety protections

Condition: used, Year of construction: 2020, functionality: fully functional, FILLING MONOBLOCK COMAC CANS SMARTCAN 8-1 Brand: Comac Model: Smartcan 8-1 Year: 2020 Technical Specifications Product: Beer Number of filling valves: 8 Gravity filling Speed: 2300 CPH (440 ml) / 2500 CPH (330 ml) Operating direction: American Supported formats: 330 ml, diameter 66.3 mm, height 115 mm Can diameter: Minimum 53 mm / Maximum 84 mm Can height: Minimum 75 mm / Maximum 205 mm Lid type: Minimum 200 / Maximum 209 Additional features: Gas injection (optional) In-line electronic seamer control device with ejector (optional) Single-head electronic seamer with manual height adjustment controlled by brushless motors Machine dimensions: 2500 x 2000 x 2865 h (excluding input-output conveyor) Safety protections Fodpfxeywyhis Alqegb

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Main machine: Indosa Matic 100 automatic seamer Fsdpfx Aox R Dypslqogb Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Automatic control   Documents available in digital format.   Status / Additional information: video available in operation

Year of construction: 2020, condition: new, Counter-pressure can filling machine Eurostar Canfill 6 One Filling capacity: 2000 cans/h with 0.33 liter cans Fgsdpfxeq H Azlj Alqob 1500 cans/h for 0.50 liter cans Sleek and standard cans can be filled and sealed with the same lid (type 202).

Condition: used, Year of construction: 2022, Linearly aligned can filler with rinser, filler, lid depositor and seamer in one block. Counter-pressure filling is controlled volumetrically. Format changeover for all standard can sizes. Capacity: 2000 cans/h for carbonated drinks Max. oxygen pickup on the filler: 25 ppb Compressed air: IG 1/2", 6-10 bar Length: 2774 mm Width: 1100 mm Height: 2000 mm Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible Operation / Control: Siemens Simatic S7 Fgedpexbn Icsfx Alqsb Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Condition: new, Filling machine designed for packing delicate vegetables into any type of container. This machine is capable of operating with round, oval, square, or other shaped containers. Product is loaded into the machine via the elevator hopper, utilizing the thermoplastic mesh and its buckets, which transport the product to the loading conveyor, progressively unloading it and distributing it across the entire effective width of the belt. The loading belt transfers the product to the filling hopper, which is pre-adjusted according to the container type, and the container is filled by gravity and volume; any surplus product is diverted to the transfer conveyor. * The specified output rates may vary depending on the container and product types. Equipped with: * Filling vibrator * 4 speed variators in the control panel Fgodpfx Aexp Rhzjlqob * Modular belt elevator. Dimensions: - Paddle height: 5 cm - Belt width: 40.5 cm - Paddle pitch: 20 cm - Discharge height: 1.65 m - Loading height: 62 cm * Production output may vary depending on the format and type of product being packed.

Condition: ready for operation (used), Can diameter range: 52 mm – 99 mm Can height range: 50 mm – 140 mm Fgedpfoyyq D Hox Alqob Number of pockets: 15 Capacity: up to 200 cans per minute

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  Capacity: up to 1,600 cph (33 cl); output up to 650 L/h Formats: 33 cl standard, 33 cl sleek, 50 cl standard Application: Can filling Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns Lid format: CDL202 Can diameter: 50 mm – 85 mm Fgjdpfsyudacsx Alqeb

Condition: new, Filling container Stainless steel kettle Canister Item number: 10261 Safety filling container made of stainless steel, FM-tested, 19 liters volume - For the safe filling of liquids - Stainless steel safety container - Flame protection sieve in the filling opening - Self-closing lid and pressure relief valve - FM-tested - equipped with self-closing tap 3/4" Application : Filling Outer length (mm) : 410 Outer width (mm) : 280 External height (mm) : 400 Outer diameter (mm) : 280 Weight (kg) : 4.09 Volume (l) : 19 Fjdpfjd Dwtuex Alqsgb

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Fgedpfx Ajw Tbgdolqob Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: used, Year of construction: 2020, Cold glue labelling machine for wrap-around labelling of glass bottles. The glue is applied to the bottle in horizontal strips. A roller affixes the labels to the bottle. Additional title: cold glue labeling Capacity up to: 6000 bo/h for cylindrical glass bottles Max. label length: 285 mm Formats: Euro 0.5 l and 0.33 l; wrap-around labels Fgedpfjw Ta Rhjx Alqsb Operation / Control: control panel on machine side Base construction: Stainless steel housing on feet with plexiglass doors Features: Label magazine, 2.5 m motorised bottle conveyor belt, pneumatic glue pump, control panel on the side of the machine

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour 540mm: 2000 bottles per hour Fedpfxjyiptqj Alqogb Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° Fgsdjy Hiuwepfx Alqob EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Fgjdpfjtqmwgsx Alqob Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Fedpfjtqmvrox Alqjgb

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm Fedpfx Aewnriajlqogb No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen

Condition: used, Automatic Bag Filling Line Fgsdpfjyq Tb Iex Alqsb Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer Fgsdpfoxdbwiox Alqob - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Fgodstux H Ijpfx Alqeb

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product. Fjdpeh A Hbxofx Alqogb