Used centering & end processing machines for sale (27)

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw Kljdpfx Ahovp Sd Ie Nol - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Kledpfxjt Hwuve Ah Njl Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! Klsdpfx Aovpgtqoh Nol TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Klsdpfxsg Umito Ah Njl Accessories: with magazine