Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, - Year of manufacture: 2020 - Made in Bulgaria - DTR, CE TECHNICAL SPECIFICATIONS: – Height of workpieces: 8-45 mm – Minimum length of workpiece: 100 mm – Minimum width of workpiece: 100 mm – Edge thickness: 0.4-3.0 mm Chjdpfx Aew H Ryusatsd – Feed rate: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum length of workpieces: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1x 1.1; 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge trimming unit: – Glue removal unit: – Polishing unit - motor power: 2x0.18 kW – Polishing unit: 2800 rpm – Extendable support with rollers: – Diameter of dust extraction nozzles: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions - L x W x H: 4130x1220x1470 mm – Weight: 1180 kg

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm Codpottakhofx Aatshd MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ott Atlantic V6 edge banding machine Cedpfxjr Elhvj Aatshd capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 1999 price 5500.-

Condition: ready for operation (used), Year of construction: 2010, This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for sale.Contact us for more information. Additional equipment • Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters • End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm Machine Benefits Technical Machine Benefits Cjdpfx Aaezug Nxstjhd • Dimensions of machine (lxwxh): 2100 × 825 × 1380 mm / weight (kg): approximately 520 kg • Voltage: 380v, 3-phase / power consumption: 8a / air pressure required: 6 bar

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids Chsdpfx Ajzug Sgeatod

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system Cedpfjzug Smox Aatehd • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is included with the machine.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) Cedpfx Aszuhd Reatohd • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 0-261-03-6806, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,610 mm, total length: 4,000 mm, total width: 1,680 mm, overall weight: 1,000 kg, Equipment: documentation/manual, The Brandt edge banding machine has provided excellent service for 30 years in a small business and is now to be passed on to new owners. Chedpfx Aasz Db N Nstjd

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) Chodjzuyi Eepfx Aatod - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent Chjdpfszuyi Sox Aatsd - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: Chodpezuypljfx Aatsd - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm Cjdpezuyprefx Aatehd - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Chsdpfx Aozuzlheatjd Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, 0,4-8 mm Chodpfxozu A R Se Aated Workingpiece thickness from to 8-60 mm Total length 4930 mm Feed speed 10 m/min. Weight 1500 kg

Condition: excellent (used), Edge gluing machine SKM 100. Chedpfxjzxgg Ss Aatod

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Cjdpjzxy Nyjfx Aatjhd Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges Chsdpfx Aezk N Ehsated - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Chodpfx Aajzrd Rzstsd Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 4547, functionality: fully functional, operating hours: 5,049 h, total height: 2,550 mm, total length: 5,900 mm, total width: 1,350 mm, overall weight: 3,000 kg, plate height: 45 mm, TECHNICAL DETAILS The machine consists of 8 processing units as follows: 1. Unit: Pre-milling unit – tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers – tools available 4. Unit: End trimming unit – tools available 5. Unit: Rough milling unit – tools available 6. Unit: Edge rounding unit – tools available 7. Unit: Radius profiling unit – tools available 8. Unit: Brushing unit – tools available Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 60 mm Panel length min.: 180 mm Feed rate control: Continuously variable Gluing system: Glue pot Voltage: 400 V Power consumption: 53.31 A Fuse: 63 A Chjdpjzrmtfefx Aatod Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,350 x 2,550 mm Shipping weight: 3,000 kg Note: The top and bottom stripping blades are currently not functional.

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Chjdpfx Ajk Egvdoatsd Phon group

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, SCM edge banding machine, model K 201, CE mark, complete with control console, edge banding area for workpieces up to 3 mm material thickness and 45 mm material width, reinforced roller separation up to 3 mm, strip magazine, workpiece guidance via chain with roller top pressure, central adjustment of top pressure, frequency inverter, HF cross-cut saw unit, HF radius milling unit, motors with quick-change system, soundproof hood, digital glue temperature control, underfloor gluepot, glue application via roller dosing system, extendable roller rail, central extraction nozzle. Chedpfx Aeyath Heatjd

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Chsdpob A Nlxefx Aatsd -Price: per piece -Weight: 5 kg/piece

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Chedpju E E D Defx Aated Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg With full Documentation and CE. Very good condition, fully working!

Condition: used, Double squaring edgebander usable in line or off line as first or second machine CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Distance between the retractable pins mm 500 Csdpfx Aaskvrxqstehd Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Without service / warranty for this price. Csdpfeng H Uvox Aatjhd Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)