Condition: new, Year of construction: 2024, new dust extractor Year of manufacture: 2024 For wood dust and chips, designed for commercial use Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision guard Dimensions (LxWxH): 1755 x 830 x 1800 mm Chip collection volume: 2 x 165 l Extraction inlet diameter: 200 mm Weight: approx. 259 kg Filter area: 22 m² Manual filter cleaning Sound pressure level: 72 dB(A) Nominal air volume: 2262 m³/h Maximum air volume: 3700 m³/h Motor: 400 V, 3 kW Availability: short-term Iiodpfxeyq T Hko Aqusc Location: Flörsheim

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Iiodpfx Aofccuzjqusc -Outer frame: made of galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Condition: used, Year of construction: 2003, Filter area: 50 m² Iodszb N T Uepfx Aqusic Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Briquetting press Schuko C 800 - 2 with extinguishing device Motor: 1.5 kW Weight: approx. 1200 kg Storage location: Supplier

Condition: excellent (used), Mobile Extractor Manufactured by Höcker Polytechnik Extractor Standard III A Intake diameter 160 mm Motor 2.2 kW 380 volts Air flow 2460 m3/h Year of manufacture 1992 Transport dimensions: Iiodpfx Aqowl U U Hsujc Height with filter 2450 mm without filter 1460 mm Length 1170 mm Width 570 mm Weight 80 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Iodpfxszddwgs Aqujic Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: used, total height: 2,400 mm, total length: 2,450 mm, total width: 650 mm, Colour: Grey Empty weight: 250 kg - Documentation available: No Iisdpfxeyy R Ryo Aquoc - CE certificate present: No - Suitable for material: Wood dust - Main fan [pcs]: 1 - Number of filter bags [pcs]: 3 - Filter length [mm]: 1200 - Filter diameter [mm]: 500 - Filter surface area [m²]: 7 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Options: Collection bags - └ Number of bins/bags [pcs]: 3 - Transport dimensions: 2450mm x 650mm x 2400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, total width: 900 mm, total length: 1,260 mm, total height: 1,450 mm, Empty weight: 389 kg Isdoxan Iaepfx Aqujic - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 1615 - Main motor power [kW]: 11 - Flow capacity [m³/h]: 5450 - Negative pressure [Pa]: 3800 - Rotation speed [rpm]: 1450 - Connection diameter [mm]: 250 - Output diameter [mm]: 250 - Transport dimensions: 1260mm x 900mm x 1450mm (l x w x h) - Transport weight [kg]: 389kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,100 mm, total length: 1,000 mm, total height: 1,700 mm, Empty weight: 150 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 11 - Connection diameter [mm]: 410 - Output diameter [mm]: 360 - Transport dimensions: 1000mm x 1100mm x 1700mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Ijdpfx Aqeybb Dxjujic Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,080 mm, total length: 1,550 mm, total height: 1,220 mm, Empty weight: 800 kg - Documentation available: No - CE certificate present: No - Main motor power [kW]: 15 - Rotation speed [rpm]: 1460 - Connection diameter [mm]: 350 - Output diameter [mm]: 400 - Transport dimensions: 1550mm x 1080mm x 1220mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Iiedpfxjxaknij Aqusc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, 1) NYBORG-MAWENT WPT-40 Year of manufacture: 2007 Inlet and outlet diameter: 400 [mm] Engine power: 30 [kW] Isdpfx Aozdb Ipoqusic 2) Inlet and outlet diameter: 300 [mm] Engine power: 18.5 [kW] Spare impellers for fans!

Condition: used, Used machine Equipment and technical data: operational Engine 1.8 kW Dust extraction port 160 mm Availability: short notice Iedjzbv Huspfx Aqujic Storage location: 63934 Röllbach

Condition: used, Year of construction: 1991, total width: 1,200 mm, total length: 800 mm, total height: 1,100 mm, Colour: Blue Empty weight: 280 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 2477 - Main motor power [kW]: 7.5 - Flow capacity [m³/h]: 71 - Negative pressure [Pa]: 315 - Rotation speed [rpm]: 2900 Iiodpfx Aow N I U Hsqujc - Connection diameter [mm]: 300 - Output diameter [mm]: 300 - Rotor material: Metal - Voltage [V]: 400 - Current consumption [A]: 13.8 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 800mm x 1200mm x 1100mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Extraction system Höcker Polytechnik Type: MultiStar JP5 Year: 2012 Iiodpezc N Dpofx Aqusc Capacity: 20,000 m³ Motor: 30 kW with briquetting press BrikStar c-3 18 Negative pressure system Filter surface area: 121.3 m² Filter bags: 100 pieces Bag length: 2,300 mm Bag diameter: 170 mm (outside, pressurized) Compressed air connection: 6.0 bar, 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 216 Nl per bag row Footprint L x W: 2,540 x 2,420 mm Space required L x W: 3,500 x 3,380 mm Internal height: 4,430 mm Weight approx.: 1,960 kg Duct bend 90°, 2 mm, 900 x 800 mm, 1 pc Bolted design, galvanized steel sheet, 2 mm duct dimension 1: 900 x 800 mm, duct dimension 2: 900 x 650 mm, shape: asymmetric 460406 duct, 2 mm, 750 mm length, 900 x 800 mm - 2 pcs bolted, galvanized steel sheet, 2 mm 1 blank cover 2 mm, 900 x 800 mm 1 pc for MS xP on BrikStar 1 pc 300 x 2,300 mm on existing briquetting press Manufacturer Gross (approx. 1,100 x 1,100 mm / press height: 1,260 mm)

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE Iijdjuc Unqspfx Aquec 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Iisdpfx Aobuvbroqujc Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Location: From stock Bitburg Iijdpfx Aqscdy Ndjujc

Condition: as good as new (ex-display), Year of construction: 2025, Basically new machine, has run with us at the in-house exhibition ( 3 days ) 5 operating hours Technical data 300-P Suction port: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Iiedpfxsbqachj Aqusc Weight: 880 kg Location: Ex stock 54634 Bitburg Immediately available subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening Iiodpfx Aqjcnw U Djuec

Condition: new, Year of construction: 2025, Description: Iisdpfx Aqjcqy I Souec IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 160 P : - Intake port Ø: 160 mm - nominal motor power: 2,2 kW; 400 V/50 Hz Iodpfx Ajbpg Itequjic - max. volume flow: 2000 m³/h - nominal volume flow: 1448 m³/h - negative pressure: 2503 Pa - filter surface: 9 m² - filter cleaning: Compressed air cleaning - Filling container (roll container): 241 litres - Dimensions ( L x W x H ): 1684 x 830 x 2050 - Weight: 288 kg - execution / operating side alternatively right / left Location: ex stock 54634 Bitburg Top price for the show piece

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 Iisdpfshk Dfrox Aquec For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system Ijdpfx Aqsdqzhhsusic 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Iiedpfevlz Arsx Aqujc Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Isdecdy I Tjpfx Aqujic Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Iiedpfx Aqshkztwouec Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -