Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW Cedpfx Aob Iqf Nsgrjhd -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm -Connection output: 400 x 400 mm -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm Cedpfx Agoc Ir Dujrjhd -Weight: 222 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower Cjdpoca Iarefx Agrehd -for: paint wall, paint booth -Motor: Explosion-proof -Engine power: 5.0 kW -Speed: 1455 rpm -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings Cjdpfocba T Djx Agrshd -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Cedofn Nddepfx Agrehd Clamping bar (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Codpofccuzsfx Agrehd -Outer frame: made of galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Condition: ready for operation (used), Year of construction: 2013, Dear customers, Chedpfegny Agox Agrsd For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! See photos!

Condition: used, Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece Chedegua Htopfx Agred -Weight: 1.5 kg / pc.

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system Chedpfx Agoh Szarered -Manufacturer: MEP, extraction system with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base: on wheels -Dimensions: 950/480/H1860 mm -Weight: 40 kg

Condition: excellent (used), Grinding table with dust extraction Chedpfsh Uci Ejx Agrsd Work surface: 149x105cm Overall dimensions: 149x105x160cm (H) + dust extraction port

Condition: used, Technical specifications: Filter bag diameter: 1 x 1000 mm Collection bag diameter: 1 x 1000 mm Extraction nozzle: 200 mm Cedpszd Ef Djfx Agrohd Power supply: 400 V Motor speed: 2900 rpm Motor power: 3 kW Overall dimensions: Length: 1700 mm Width: 1100 mm Height: 2400 mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, Nestro Dust Extraction System Dust Extraction Nozzle D = 160 mm Motor power 2.2 kW Filter area approx. 11.5 m² External dimensions L x W x H approx. 1350 x 860 x 1960 mm Weight approx. 240 kg One chip collection bin / approx. 185 l Max. rated volume flow 1780 m³/h Associated negative pressure approx. 2400 PA Codpfx Aezhv Nnegrehd All information is subject to change. This information was taken from a brochure.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm Chedpfx Aezvz Tbsgrjd - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: good (used), Holtrop & Jansman MSO-250 Cjdpfx Agozzmadorshd Dust extraction system with negative pressure Connection diameter: 250 mm Capacity: approx. 4,000 m³/h at 2,000 Pa Motor power: 4 kW Fire protection flap Filter hoses: already replaced with an antistatic version.

Condition: excellent (used), Year of construction: 2004, Mion Mosole vacuum extraction unit, used. Csdpszx Tf Ijfx Agrjhd

Condition: used, Second-hand Schuko radial fan for wall mounting, for extracting wood dust, shavings and similar materials. Technical data: - Motor: 4 kW - Connection: 250 mm Chjdpjzw Ewgsfx Agrsd

Condition: excellent (used), functionality: fully functional, GHEBAL extraction system Chjdpfxex H Ndfj Agred Number of filter bags: 180 pcs Built-in rotary valve Fan positioned after the rotary valve Main motor power: 30 kW, can be converted to 22 kW Pneumatic filter bag shaking system Dimensions: 3550x200x7850 mm Weight: approx. 2000 kg

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan Chsdpfsuncwxox Agrjd -Manufacturer: Dietz, low-pressure radial fan type DN 14 -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295 mm -Weight: 15.4 kg

Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Chodpfjvwflnox Agred

Condition: new, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Chsdpfx Agsvuggborsd Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Codpfjvugrdex Agrjhd Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available -Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW Chodpfx Agsvtzdljred -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: new, Year of construction: 2026, CORMAK FAN4000 Material Handling Fan – High-Performance Industrial Dust and Chip Extraction The CORMAK FAN4000 is a professional material handling fan designed for industrial dust extraction systems used to transport wood chips, sawdust, and dry particulate waste. Equipped with a high-performance centrifugal impeller and a powerful 4.0 kW motor, the unit delivers an impressive 6,500 m³/h airflow, making it an ideal solution for large woodworking shops and manufacturing facilities. Designed for continuous operation, the FAN4000 efficiently serves multiple woodworking machines generating dry waste. Main advantages of the machine Airflow capacity of 6,500 m³/h – efficiently removes dust, chips, and sawdust from multiple workstations. 4.0 kW / 400 V industrial motor – designed for continuous operation in industrial environments. Motor speed of 2,850 rpm – ensures reliable performance even under heavy workloads. Large Ø250 mm inlet and outlet connections – enable easy integration into industrial ducting and extraction systems. Compact dimensions (670 × 600 × 600 mm) – simplify installation in confined technical areas. Heavy-duty steel housing – resistant to vibration, mechanical damage, and corrosion. Construction and technology The FAN4000 has been engineered for demanding industrial environments. At its core is a centrifugal impeller dynamically balanced and mounted directly on the motor shaft. This direct-drive design minimizes power losses while eliminating the need for belts or additional transmission components. The powder-coated steel housing protects internal components against dust, moisture, and chemical exposure. High-quality bearings ensure long service life, smooth operation, and reduced noise levels. Precision and operating efficiency Thanks to its high airflow capacity, the FAN4000 efficiently transports large volumes of dry waste in real time. By maintaining constant negative pressure throughout the extraction system, it helps prevent clogging of filters, ductwork, and machinery. This contributes to stable production processes while protecting machine components from excessive wear. The FAN4000 is ideally suited as a central extraction fan for integrated dust collection and material handling systems. Applications Chedpfx Ajvuqyrjgrjd The FAN4000 industrial extraction fan is suitable for: industrial woodworking facilities, furniture, window, and door manufacturing, workshops processing solid wood, MDF, and HDF, CNC machining centers and automated woodworking machines, conveying wood chips and sawdust to cyclones, silos, or collection containers. Standard equipment 4.0 kW three-phase motor (400 V) Direct-drive centrifugal impeller Powder-coated steel housing Ø250 mm inlet connection Ø250 mm outlet connection Optional equipment Flexible Ø250 mm suction and discharge hoses Connection reducers and machine adapters Cyclone separators and final-stage filters Blast gates, elbows, and duct tees Automatic machine start control systems Technical specifications Parameter Value Maximum airflow 6,500 m³/h Inlet diameter 250 mm Outlet diameter 250 mm Motor speed 2,850 rpm Dimensions (L × W × H) 670 × 600 × 600 mm Motor power / Voltage 4.0 kW / 400 V Weight 53 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Dear customers, To ensure quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Right-hand execution with connection diameter: 350 mm with flange JET cleaning system Motor power: 11.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Maximum volume flow: 8000 m³/h Negative pressure at 20 m/s in the intake nozzle: 3162 Pascal (in dusty condition) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug Cjdpfx Agjy T Rdmorohd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2260x920x2250 mm Weight 450 kg Total power requirement 7,5 kw Chodevz Eiujpfx Agrsd