Used die cutter for sale (96)

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual Kodpfx Afsu Ul Tzogslt – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Kedpfx Afswxtb Esgolt Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure Kedpsu Ul Tuofx Afgelt – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: like new (used), Device for cleaning die-cut sheets Klodewyxi Rjpfx Afgot German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Kodpfx Afow D E Rvjgolt Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication Klodpfxoumuxxs Afgst – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Kljdpfjwmy Rijx Afgjt Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Kjdpfxex Dilhe Afgslt

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Kedpfsx R R R Usx Afgjlt

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production Kljdpfx Afexzvamsgst available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Center Line System: for Quick Job Changeover Kedswr T Aijpfx Afgelt Working Hours: 1500h

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h Klodpfju Snwmsx Afget

Year of construction: 2013, condition: excellent (used), functionality: fully functional, 2013 Maximum width: 370 mm 10 colors Rail Combo laminator on rail Web turn bar Chilled drums Ksdpfx Afow Sw Rpjgolt Chiller 2 die-cutting stations 5 x Hot Air dryers Tooling

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. Kedjxl Talopfx Afgelt DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: good (used), Year of construction: 1992, The James Burn BB32/37 is a semi-automatic wire binding machine with a working width of 320 mm and closes wires of all diameters from 1/4 inch to 1 inch in both 2:1 and 3:1 pitch. With the BB32/37 you can bind up to 1,800 books per hour. The machine is equipped with closing tools for all diameters. Compressed air is required for operation. Kedpfxexdfb Ss Afgelt

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) Kedpfx Afjwh Tq Sogolt • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: reconditioned (used), functionality: fully functional, Rabolini mod. Imperia D, with feeder unload, with Hot Foil System 2 advances Size 80/120 cm, Kedpetp T Hxefx Afgjlt Pneumatich clutch, Lateral register square 3 work mode, 6 sector HOT PLATE Original HOT FOIL SYSTEM WITH 2 advances, Feeder original RABOLINI, Review machine.

Condition: good (used), functionality: fully functional, Kerma Manual Die-Cutting Platen Year of manufacture: 1979 Weight: approx. 2.5 t Inner frame width: 485 mm (height) x 640 mm (width) Cutting area: 520 mm (height) x 660 mm (width) No TÜV (safety certification) Processable materials: Corrugated board, B and C flute Solid board up to 2 mm (cutting and creasing) up to approx. 1000 g/m² Kljdpfx Aot S Rlfjfgot For TÜV certification, safety switching mats must be retrofitted. A lot of accessories (at least 10 die frames) Terms of delivery: Self-collection from location in Germany, not dismantled, not packaged Price: negotiable

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm Kjdpfx Aexzr Hpsfgslt • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Year of construction: 2010, condition: used, Imperia D (85 x 105 cm), year of manufacture 2010, CE 2010 Machine reinforced at connecting rods Kodpjxa Epnofx Afgelt Micrometric pressure adjustment Weight: 6,000 kg Mechanical speed: 1,200 sheets/hour Machine inspected by manufacturer, safety devices optimized With hardened cutting plate Self-centering universal frame Operator arm with control panel Refurbished pneumatic brake-clutch system Delivery time: 60 days Price: on request Warranty: 3 months

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request Kjdpfx Afov T T N Hogolt